Overblog Suivre ce blog
Editer l'article Administration Créer mon blog

OBD2 Tools

OBD2 Tools

OBD2 diagnostic tools & software technical service


Which Benz Key Programmer can add a BGA key

Publié par JTAC sur 8 Décembre 2015, 22:58pm

Catégories : #car key programmer

Question before entering:

Which tool can read password of Mercedes bga key?

Used ak500+ to do bga key calculation for my Mercedes W164 2010… Failed?!!

My friend then bought a Diagspeed device for 7200 dollars. Because of existence of function of reading the password from a key BGA exchange with the lock. The device wasn’t found by the password with 62 ROM, it was necessary to send the text file created by the device to the developer.

Tried to calculate BGA key with CKM100… Failed also?!!

Here comes the new solution!!

Recently, a new MB BGA Tool has been released, which solved MB bga key online calculation. It is Xhorse VVDI MB BGA TOOL.

This VVDI MB TOOL not only supports Mercedes bga key online calculation, but works well on new Benz models supporting IR/OBD, which AK500 pro, CKM100, CKM200 do not support. W164, W164 2009+ A166, W197,W212, W218, A246 A169, W209, W211 W172, W204, A207 W203 W204, W207, W212 only by dump W209 only by dump W210 W215, W220 W230 W216 W221 W906

and supports key versions as follows: v03, v06, v08 v05, v07, v09 v59,v61

Tests display

– “10 minutes to calculate Mercedes BGA key password by Xhorse vvdi mb tool”

Two part included: Read EIS data and calculate password.

Read EIS data.

Select type:A166,W197,W212…, click OBD and then click Read.

EIS data reading success.

Calculate password

Prepare online password.

Turn on ignition.

Select Key tool.

step 1, select A166,W197,W212…

step 2, select OBD to collect data.

Prompt: device connected to the OBD and put the original key in the EIS. (click OK)

Waiting for 15 seconds…

Insert the original key to vvdi MB tool, when system prompts.

Data are being collected…

(5 minutes needed)

Data collection is completed.

Prompt: insert the original key in the EIS. Do as the prompt, and click OK.

Waiting for 30 seconds…

Prompt: insert the original key to vvdi mb bga tool. Do as the prompt, and click OK.

Save data.

Start to upload data, calculate password.

Prompt: uploading data…3 minutes needed… Click OK.

Click step 4 Real time monitoring results and Refresh as a result.

Click Yes to begin refresh.

File B200 are calculated.

Be waiting and again collect a set of data…

(if the first set of data fails, use the second set of data)

Prompt: connect VVDI MB TOOL OBD port to EIS. Insert the original key to EIS. Do as the prompt, and click OK.

Prompt: insert the original key to vvdi mb bga tool. Do as the prompt, and click OK.

Be waiting and again collect a set of data…(4 minutes needed)

(if the first set of data fails, use the second set of data)

Data collection and password calculation complete.

Done.

(NOTE: VVDI MB TOOL Chinese version was tested here, but VVDI MB TOOL English version is released also.)

Which Benz Key Programmer can add a BGA key

Commenter cet article

Archives

Nous sommes sociaux !

Articles récents