This is the instruction on how to flash AU56X with Bluetooth VAS 5054A ODIS V3.0.1 engineering diagnostic software.
– battery: connect a battery charger for your vehicle, ANYTIME
– vehicle: Before you start flashing, start and stop the vehicle to prevent the power saving mode.
Connect your computer to charger, some updates can be long.
Ensure that the computer does not contain any faults
– software: ODIS-E_6.2.2_new.rar
Note: FREE. NO PASS.
ODIS Engineering 6.2.2 + PostSetup + Projects (Multilingual) cracked, with launcher (Note: we are not responsible for what you try)
– device: connect the head VAS 5054 interface with the usb cable.
Steps to flash AU56X with ODIS-E
Information on ODIS report up in the vehicle data:
Then inside ODIS go and choose your engineering “project vehicle” as follows:
AU56X in this case
Click on the green triangle
the list of computers with different options on the right
Select the computer to update and double click on Flashing right
Then select the computer you want to update and click File local Flashing. In
principle on the DVD of Flash, you can only select the flash file on your computer
Note: you can also select an older version; that is, maybe the software will allow flashing with.
on system No 17, which corresponds to the instrument cluster is version 0120
So, select the 0240 release
Also, ok to select the updates to the other computers that it be done in the future without
(Personally, this would not be recommended unless you follow the precautions.)
click Start Flashing:
Now a security window will appear:
Click YES, and Flashing begins:
LOOK AT THE TIME IT TOOK TO FLASH INSTRUMENTS MODULE 17 – 26 MIN
Once completed, cut and replace the contact and validate the window, by software pop-up
erase all memories of events on all systems, click YES.
And then the report window is displayed:
The flash was successful, system 17 passed on new version