Overblog Suivre ce blog
Editer l'article Administration Créer mon blog

OBD2 Tools

OBD2 Tools

OBD2 diagnostic tools & software technical service


MB Star W164 SAM Offline Programming Problem Solution

Publié par JTAC sur 3 Mars 2016, 19:24pm

Catégories : #car diagnostic tool

One of customers sent an email to obdii365.com customer to report that he has a question that no option to program the SAM using offline programming with MB SD Connect C4 multiplexer and Xentry 12/2015 fail to do. Here is the proper solution provided by our technician.

Customer testing vehicle and MB star diagnostic version:

2005 ML350 4Matic

MB SD C4+ Dell D630 laptop+ 2015.12V DAS/Xentry

Problems Description: Problem one: Problem with the front SAM, when select Yes the next screen goes to online programming. There is no option to program the SAM using offline programming. At least I couldn’t find it. The starter doesn’t even crank.

Problem two: Secondary problem is the ISM. The original module generated a message on display: “Drive to workshop without changing gear”. The transmission now is stuck in Park. I installed another identical module from another ML350 and the message is gone but there is no reaction when changing the shifter from park to other positions. I get a message to depress the brake even when the brake pedal is depressed. Also, when I go to the Developer option I get the message the file is missing, see photo. So, I have two serious problems to deal with. I’m looking forward to your feedback.

Obdii365.com Engineers reply and solution way:

Please can not use ISM from other car,..use brand new,..marry it to the vehicle and you will probably start the engine. Then program front sam online,..or if you don’t have online access,..pass this step,..it has program inside it generally.///code it manually according your car,..and if still has SAM errors,..probably could change it with new one! Neither ISM neither SAM need online or offline,..they always can be initially startup manually with DAS

As for the question “I don’t know why when I accessed the front SAM with DAS it gave me a message saying that the SAM needs to be programmed. See the attached photos. It is not my imagination. This is what I got when trying to read the fault codes from the front SAM.” I guess: probably your sam is almost dead.//put other one used..or new one

http://blog.obdii365.com/2016/03/03/mb-sd-c4-w164-front-sam-offline-programming/

Commenter cet article

Archives

Nous sommes sociaux !

Articles récents