Overblog Suivre ce blog
Editer l'article Administration Créer mon blog

OBD2 Tools

OBD2 Tools

OBD2 diagnostic tools & software technical service


How to install Ksuite V2.22 for Kess V2 master clone

Publié par JTAC sur 11 Avril 2016, 19:33pm

Catégories : #car ecu programmer

Good news! Engineers at obdii365.com has developed Ksuite 2.22 and tested it on Kess v2 firmware v4.036 already. Ktag will be tested with it in the near future. Here is the instruction on how to install Ksuite 2.22 and test it on BMW E90 with Kess v2 master ecu tuning kit.

Software version: Ksuite V2.22 Firmware version: Kess v2 v4.036

Operating system: Windows XP

 

Step 1- Disable network connections

 

Step 2- Open Ksuite 2.22 CD-ROM

Copy folder “KSuite 2.22” to Desktop

 

3- install K-Suite 2.12

Open the new folder “KSuite 2.22” on Desktop

Run “setup” app

Click Next, then click Install to install K-Suite 2.12

 

Click Yes to accept the agreement

Select a setup language and click OK

 

 

Step 4- install Driver

Click Next to install Driver USBDEVICEDRV 1.00.011

 

Click Next to begin installation

Click Finish when Driver USBDEVICEDRV 1.00.011 installation completes

 

Step 5- run K-Suite 2.12

Select kess v2 language

 

Prompt: Connection not established. Click OK

Close ksuite 2.12 interface

 

Step 6- install Ksuite 2.22

1) extract ksuite 2.22.rar

Extract zip file ksuite-2.22 on the new folder “KSuite 2.22”

Extracted folder is “ksuite-2.22”

2) setup Ksuite Properties

Open Ksuite Properties on Desktop

Find target

Delet all files in C:\KSuite

Copy all files from Desktop\KSuite 2.22\ksuite-2.22 to C:\KSuite

 

Close Ksuite Properties

Delete folder “KSuite 2.22” on Desktop

Copy folder “help” from CD-ROM Ksuite 2.22 (E:) to C:\KSuite

3) install and setup USB device

Found new hardware wizard: install the software automatically (recommended). Click Next

USB device installation completes. Click Finish.

Open Computer management

Select Device manager->Universal serial bus controller->USB Device

 

Close Computer management

 

Step 7- run Ksuite 2.22 and diagnose BMW E90

Open ksuite on Desktop

Click on the car icon

 

1) Test KESS V2 ksuite 2.22 on BMW E90 323i 2005 24v

 

 

Select CAN

 

Select ID

 

Connect your vehicle to a stabilized battery charger

 

Switch on the dashboard, check the connect

 

Starting communication…

 

Switch off the dashboard

Connect your vehicle to a stabilized battery charger

Switch on the dashboard, check the connect

Get the HW, SW, Chassis number, click OK

 

Save as? Cancel

Switch off the dashboard

Back to BMW E90 menu

http://blog.obdii365.com/2016/04/11/how-to-install-kess-v2-master-ksuite-v2-22/

Pour être informé des derniers articles, inscrivez vous :

Commenter cet article

Archives

Nous sommes sociaux !

Articles récents