Overblog Suivre ce blog
Editer l'article Administration Créer mon blog

OBD2 Tools

OBD2 Tools

OBD2 diagnostic tools & software technical service

SD Connect C4 SDnetControl “no signal”

Publié par JTAC sur 3 Mai 2016, 22:50pm

Catégories : #car diagnostic tool

Can the old MB SD Connect C4 multiplexer work with the new XENTRY/DAS, etc.? Here is a case ans solution also, which helps error SDnetControl “no signal”.

Background: 2015.12v MB SD C4 software cannot work with 2013 sd connect c4 diagnostic system.

Operating system: Windows XP

Error interface: No signal


Self test results: Selfdiagnostic ==============


Device:?SDconnect/eCOM Toolkit-Resultcode:?-1 Testresult:?0 Number?of?errors:?1 Number?of?warnings:?0

—> Go to learn “How to setup SD C4 software in HDD/ SSD” Video guide: https://youtu.be/1tulfRL-Wqc

Main Steps: Set date and time same as the current Step 1 – Run StartKeyCenter Step 2 – Action to avoid Xentry reactivation Step 3- Run Get Hardware ID Step 4 – Run EPC & WIS Step 5 – Add “license” to registry Step 6 – Run EPC & WIS with new password Step 7 – Network setup Step 8 – Run SDconnect Toolkit Step 9 – Diagnosis

For details of SD C4 xentry/das, epc, wis activation(setup), pls refer to http://blog.obdii365.com/2016/03/23/activate-mb-sd-c4-2016-03-das-xentry-on-win8-via-wifi-and-lan/


Pour être informé des derniers articles, inscrivez vous :

Commenter cet article


Nous sommes sociaux !

Articles récents