Here is the step by step installation guide of VAS 5054a VAS-PC V19.01.01 diagnostic software for VAG group VW Audi Skoda Seat.
1. Start with a clean install of Windows XP SP3 2. Install Java 18.104.22.168 (attached the install file in this post) 3. Restart PC and if you are not installing VAS-PC in a Virtual PC, install virtual drive software like DAEMON tools 4. Go to control panel---->Java Plug-in---->Click on update tab---->UN-Check 'check for updates automatically'---->click Apply and then close it. 4. Mount the VAS-PC 19.01.01 Base CD and start installation 5. After installation completes, restart PC 6. Run the VAS-PC Hotfix for v.19.01.01 7. In the desktop open the shortcut for 'Configurator' - In that, click 'Java Settings' ---> In the 'JVM' box, it should show '1.4' - close the program. 8. Open VAS-PC from shortcut in the desktop. It should load and then close. 9. Go to C:\SIDIS\home and open the 'label' file with Notepad and change the 'period' value to some date in the future, for ex. period=26/04/2016 - this is done to prevent the 'out of date' errors in VAS-PC. Save the file and close it. 10. Open VAS-PC from desktop shortcut--->click on Administration--->Enter workshop code Now it will ask for Distribution Center/Importer No. - enter any 3 digit number in the numpad and click Q on the on-screen numpad Now it will ask for Dealership Number - enter a 5 digit number on the numpad and click Q on the on-screen numpad Now it will ask for dealership identifier - Enter a name and click Q on the on screen Keyboard twice. 11. Close VAS-PC. 12. Go to start menu--->Run--->type 'regedit' (without the quotes) and press enter 13. Go to HKEY_LOCAL_MACHINE\SOFTWARE\SIDIS\ENV and find the registry entry "THE_REAL_CDROOT" - this entry contains the CD drive letter that VAS-PC uses for installing brand CDs - Right click this entry ---> Modify---> then change value to the drive letter of the CD drive you are going to use to install the Brand CDs. If you are using a virtual drive, change this value to the virtual drive's drive letter. After changing the value, click OK and close the registry editor. 14. Mount a Brand CD (VW/Skoda/Audi/Seat/Bently) and open VAS-PC. 15. Click on 'Administration'--->'Install/Update CD'---> It will ask whether to install update, click OK ---> now brand CD will install. 16. Repeat steps 14 and 15 to install the rest of the brand CDs. http://www.obdii365.com/wholesale/vxdiag-vcx-nano-5054a.html