Overblog Suivre ce blog
Editer l'article Administration Créer mon blog

OBD2 Tools

OBD2 Tools

OBD2 diagnostic tools & software technical service


How to read flash remap Audi A4 ECU by MPPS V18

Publié par JTAC sur 30 Octobre 2016, 22:04pm

Catégories : #Xtool X100 Pad, #Xtool X100 Pad2

I’ve used MPPS v18 clone for a few days. And something wanna share with all A4 owners for diy on cars. All A4 cars here i did from my A4 clubs.
 

Read ECU:

Mpps clone don’t work very well on some edc16.
For example on my a4 b7 tdi 140
Edc16u31 ecu, mpps can’t wake up my ecu so can’t read.
Another with a transporter tdi 170
Edc16u31 ecu , i can read his ecu.
For my a4, i have bought a Fgtech Galletto v54 clone and it work well

 

It is hard to damage EDC16 during opening when you are a little bit carefull, you dont have to lift PCB, only remove the cover. Not the hard way like MB EDC16…

 

 

Flash ECU:

Please do not flash a a4 me7 with mpps unless you have check summed and checked the file for crc errors. Mpps won’t correctly check sum it. And nor will tunerpro with plugin, only trusted way is to get someone with a full Winols to do it, and then flash with mpps v18.12.3.8 clone.. Actual flashing an a4 is easy, but if it’s not check summed properly it’ll either brick on 2nd ignition or weeks / month down the line

 

 

Remap:

I remap with mpps both on diesel A4’s without issues.

Simple procedure. Only follow the guidelines. Just remember that if the engine fans run whilst i am reading ECU, then unlpug the fan by the main connector behind the N/S headlamp next to the steering fluid reservoir. Don’t want power interruptions whilst reading/writing the eeprom.

Not used precisioncode.works before so couldn’t comment on that part.

http://blog.obdii365.com/2016/10/30/mpps-v18-read-flash-remap-audi-a4-ecu/

Archives

Nous sommes sociaux !

Articles récents