Overblog Suivre ce blog
Editer l'article Administration Créer mon blog

OBD2 Tools

OBD2 Tools

OBD2 diagnostic tools & software technical service


How to Install Fgtech Galletto V54 on Windows 7 Working Solution

Publié par JTAC sur 6 Avril 2017, 19:06pm

Catégories : #kess v2, #kess v2 v4.026

(Customer Share Solution) Here is the solution for the Fgtech Galletto 4 V54 master ecu tuning kit installation with windows 7

 

Install FGTech Galletto V54 correctly with Windows 7

Hello, I would like to explain to you step by step how to install your FGTech V54 correctly with Windows 7. To do this, you must first uninstall the already installed software and the drivers. Then we start with step:

1. Run "FGTech Galletto Edited v1.0.exe" as an administrator. Important: Do not create a desktop icon and run the program yet.

2. Next, connect the Galletto device to the power supply and then connect it via USB. The automatic driver installation fails. But do not worry, the installation is done manually.

3. Right-click on the "Computer" icon and select "Manage". As soon as the window opens, click on Device management and select the USB port "FGTech". Here you have to click "Update driver software". And then click "Browse the computer for driver software", then "Select from a list of device drivers on the computer", then "Have Disk" and "Browse".

4. Now look for the folder of "FGTech" on drive C. Here you open the folder "fgtech_new_driver" and select the following file: "fgtibus.inf"! Confirm everything, wait for the installation, and close all windows.

5. Run "FGTech Galletto Edited v1.0.exe" again as an administrator. Important: Do not create a desktop icon and run the program yet.

6. Run "Galletto win7.exe" as administrator. Create and install the desktop icon. If the installation is complete, start the program as an administrator.

7. Ignore the next two windows with hints and confirm with OK.

 

FINISHED!!!

blog.obdii365.com
 

Archives

Nous sommes sociaux !

Articles récents