Overblog Suivre ce blog
Editer l'article Administration Créer mon blog

OBD2 Tools

OBD2 Tools

OBD2 diagnostic tools & software technical service


Lexia3 Diagbox 8.46 8.42 8.38 8.37 8.35 Download and Setup

Publié par JTAC sur 10 Août 2017, 00:52am

Catégories : #lexia3, #lexia 3

Here you can free download latest Diagbox V8.46 for Lexia3 PP2000 Diagbox Peugeot Citroen Diagnostic Tool!

Update Diagbox V8.17 to V8.37

Update Diagbox V8.35 to V8.38

Update Diagbox V8.38 to V8.42

Update Diagbox V8.42 to V8.46

diagbox-v8-46-8-42-8-17-software-for-lexia-pp2000-diagnostic-tool-1

Note: Please download Diagbox 8.XX software at your own risk! Tested by individuals only, not professionals.

All download links NO PASS, if it requires, you can try: Simple

Hope it helps!

 

Download Diagbox 8.17 to Diagbox 8.37 ( 75.2 MB)

https://mega.nz/#!Z0EHmRwB!T4QsYzZxrNiatSoRlacjCw7oghPpb0H200MO03BM2jg

 

 

Feedback:

Peugeot 307 by PP2000, parameter measurement, def reading, telecode on all computers = OK

Citroen C3 by Lexia-3, measurement parameters, reading def, different telecoding on just a few calculators = OK

Peugeot 308 T9 by Diagbox, read def and parameters all OK

Run Diagbox 8.17 on WIN7 pro 32= OK, but PP2000 not work showing message “PP2000 is now disable this pc”.

 

Download Diagbox 8.35 to Diagbox 8.38 (39.4 MB)

https://mega.nz/#!V8VS1Yib!p3MCZCzs8j7ruts2gAJtUPsJTflRIlTr8ZiXNKhTj1c

Feedback:

Tested update Diagbox 8.35 on Citroen C8 on Windows XP, 7 and 10

C8 CAN ok. Test telecoding on ABS or BSI ok.

Try PP2000 and Lexia after installing APP-835 (No need to connect to a car, try manually a111111111111111 as VIN and 11111 as RPO).

 

Download Diagbox 8.38 to Diagbox 8.42 (5.1 MB)

https://mega.nz/#!49F3VAxS!t1w6Hq0fPubKxC-Zm7D8fjaULpUMhudqv-FXqfcE9es

Download Diagbox 8.42 to Diagbox 8.46 (2.8 MB)

https://mega.nz/#!doFAAaKD!uTQ9QNW4-F6BBXUwom6vfeR6qtc1CTgvb5tHmGWlVK0

 

If you need a Lexia 3 PP2000 Diagbox software 100% confirmed OK, you can get Diagbox 7.76 software CD only $4.99!

diagbox-v7-76-software-for-lexia-pp2000-diagnostic-tool-2

How to install Diagbox V7.76 for Lexia-3 PP2000 Peugeot Citroen?

Part 1

https://www.youtube.com/watch?v=JeZyc4BIhzE

Part 2

https://www.youtube.com/watch?v=DVA0OSSPewg

 

6 Tips for Lexia PP2000 Diagbox installation:

  1. If App-835 folder is used to update DiagBox 7.xx, then updates 2, 3 and 4 can be used.

— Ensure you have a backup copy of the file:

“C:\AWRoot\bin\fi\APPDIAG.SYS” before you start.

— Download and execute the appropriate file for your own setup. The process will copy all necessary files to the updt folder, it will then automatically kill all associated processes to enable overwriting without conflicts.

— Run DiagBox to start the update process and wait until DiagBox is operational. Once successfully operational, close DiagBox and restart your computer to ensure all processes are running

— Done..! You may run DiagBox as usual.

 

  1. Lexia language is set to English and PP2000 to French, if you wish to change them, edit the DICO.TXT file in the EXE folders of LEXIA or OUTILREP (PP2000) and replace “GB” with “FR” or vise versa.

 

  1. Notice that DiagBox version will NOT be changed by these updates.

 

  1. DiagBox has been running on Firmware 4.3.4 since 7.66/8.02.

If you wish to revert to your original setup:

– Kill all processes again using the wicked batch file

– Rename the C:\APP folder to anything or delete it

– Rename your C:\APP8 back to C:\APP

– Restart the computer and start DiagBox.

 

  1. Make sure you are running DiagBox as Administrator and the network is disconnected.

 

  1. Before you start DiagBox, navigate to “C:\AWRoot\dtwr\updt\” and delete all contents of the updt folder. Otherwise, it will attempt to update the failed updates that you tried earlier. Do not make changes in “AWRoot”.

www.obdii365.com

Pour être informé des derniers articles, inscrivez vous :

Archives

Nous sommes sociaux !

Articles récents