Overblog Suivre ce blog
Editer l'article Administration Créer mon blog

OBD2 Tools

OBD2 Tools

OBD2 diagnostic tools & software technical service


Program Ford truck F150 F250 Smart key by OBDSTAR F100

Publié par JTAC sur 15 Novembre 2016, 23:33pm

Catégories : #OBDSTAR F100, #OBDSTAR F-100, #Ford key programmer

Ford/Mazda key programmer OBDSTAR F100 not only covers Ford cars, but also Ford trucks. Here is the instruction on programming smart keys for F150 and F250 by F-100.

 

 

Step 1: select 1 in 2 optional systems: immobilizer and smart key system

obdstar-f100

Step 2: select the model and function you want to do:

USA Ford F150, F250 models & functions in F100:

    Immobiliser

F150 / F250 (2004-2008, 2011)

Type 1

All keys lost

Type 2

Erase keys

Program keys

F250 / F350 (2008-2010, 2010-)

Type 1

All keys lost

Type 2

Erase keys

Program keys

F150 Super Duty (2011-)

F250 Super Duty (2011-)

F350 Super Duty (2011-)

All keys lost

 

    Smart key system

F150 (2011-)

Erase smart key

Program smart keys

F250 (2011-)

Erase smart key

Program smart keys

F150 / F250 (2015)

Erase smart key

Program smart keys

 

Step 3: go to Ford F150 or F250 key programming. Take “Program keys” here.

program-keys

To program keys, at least 2 keys are required.

2-key-required

Insert the key to be programmed and turn ignition on…

 

(just follow the screen instruction)

Ford key programming success. Now, 3 current keys available.

3-keys

Note: if 2 working keys in hand, try the free way before buying a Ford key programmer. It will help save a lot.

once you have had the new key cut by a Locksmith or other qualified persons use the following instructions:

  1. Insert an existing working key into the ignition cylinder.
    2.  Turn the ignition cylinder to ON(RUN) and back to OFF.
    3.  Remove the existing working key and, within five seconds, insert a second working
    key and turn it to ON (RUN) then back OFF.
    4.  Remove second working key and insert the new key before ten seconds have
    elapsed and turn it to ON (RUN). Leave it on for one second and turn back to OFF.
    5.  The security light will light up for three seconds to indicate that the new
    key has been successfully programmed.

http://obdstar.blogspot.com/2016/11/obdstar-f100-program-key-for-ford-truck-f150-f250.html

Archives

Nous sommes sociaux !

Articles récents