Overblog Suivre ce blog
Editer l'article Administration Créer mon blog

OBD2 Tools

OBD2 Tools

OBD2 diagnostic tools & software technical service


Renault CAN Clip Yellow PCB Support both ECU and Key Programming

Publié par JTAC sur 26 Juillet 2017, 19:38pm

Catégories : #Renault CAN CLIP, #Renault clip

Renault CAN CLIP programming tool, where to buy? Renault CAN CLIP yellow pcb version from obdii365.com now is verified to program ECUs and add keys to Renault.
 
Renault CAN CLIP programming solution:
best quality with AN2135SC AN2136SC full chip
renault-can-clip-yellow-pcb-1

 

renault-can-clip-yellow-pcb-2

 

renault-can-clip-yellow-pcb-3

 

renault-can-clip-yellow-pcb-4

 

renault-can-clip-yellow-pcb-5
 
 
This is the only Renault CAN CLIP china clone (with YELLOW boards) working with PROGRAMMING.
 
For old versions with GREEN boards. There is NO CHANCE!!!
So, FOGET IT if renault can clip programming
 
A GOOD TIP: Renault clip on programming asked for a 7-digit serial (digits 0-9).
 

(solved) Renault CLIP asks for 7 digit serial when programming

 
When I try to enter programming mode, the Renault CAN CLIP asks for a 7-digit serial (digits 0-9). How to do?
– I put two zeros in front to make it seven digit and it worked.
– My serial is 6 digit long and i put “0” in front of the serial. Worked fine!
– I had the same problem with my clip on programming. It asked for a 7-digit serial (digits 0-9). On my clip there was a sticker with only a 5 digit S/N so I typed in the 5 numbers and added 2 zeros on the end and it accepted them and allowed me to program.
 
 
What’s the serial numbers for fully programming, especially programming new or used ecm and also sometimes write injector serials numbers into ecm, for diesel cars…
– 123456789 works good
– 1234567 works fine for me
– On mine is all Zeros 0000000
 

Archives

Nous sommes sociaux !

Articles récents