Overblog Suivre ce blog
Editer l'article Administration Créer mon blog

OBD2 Tools

OBD2 Tools

OBD2 diagnostic tools & software technical service


How to repair Audi RS3 2012 Instrument cluster if been killed

Publié par JTAC sur 8 Août 2017, 23:19pm

Catégories : #digiprog 3, #digiprog 3 v4.94, #FVDI

Problem:

I got a V21 FVDI VAG version for Audi, and wanted to test with my own car the change mileage option. FVDI was able to successfully read the KM, but when it wrote the change, the Instrument Cluster died (got stuck into bootmode). It turned out that FVDI doesn’t handle micronas ICs. and I kown original AVDI is shit for some micronas too…

Solution:

Got a Digiprog 3 V4.94 odometer correction tool, selected the correct model, changed mileage to the one it had before modifying, and after this operation, the IC was back to life. An extra operation was to remove the DTCs from the IC, but this was done also with digiprog3 mileage programmer.

So, that’s that. I hope this helps someone in the future.

 

 

Credit to Bi0H4z4rD  who worked out the solution.

Pour être informé des derniers articles, inscrivez vous :

Archives

Nous sommes sociaux !

Articles récents