Here we will show you how to write VIN on Mercedes Benz transmission control unit TCU VGS2 VGS3 with Autel MaxiIM IM608 by OBD.

Select Mercedes- Expert Selection – TCU Tools -Read TCU data

This is the VIN in TCU
Save transmission data
We want to change the VIN of this VGS2

Select Write VIN

Input the original 17 digits VIN into this car because they just change the VGS, then do some coding on it.

Write VIN success

Go back and read the data again

Write VIN completed.

www.obdii365.com

 Problem:

Autel MaxiIM IM508/IM608/IM608 Pro can read BMW ISN from DME in 3 modes: via OBD, on bench and boot mode.  Obdii365.com here provides a supported ISN list of MaxiIM tools.

OBD mode:

E Chasis M54 read ISN
E Chasis M57 read ISN
E Chasis N45 read ISN
E Chasis N46 read ISN
E Chasis N52-MSV70 read ISN
E Chasis N62 read ISN
E Chasis N73 read ISN
E Chasis S65 read ISN
E Chasis N20 read ISN
E Chasis N47 read ISN
E Chasis N55 read ISN
E Chasis N57 read ISN
E Chasis N43 read ISN
E Chasis N51 read ISN
E Chasis N52-MSV80 read ISN (CGDI MSV80)
E Chasis N53/N54 read ISN
E Chasis N63 read ISN
E Chasis S63 read ISN
F Chasis B48 read ISN
F Chasis B58 read ISN
F Chasis N13 read ISN
F Chasis N20 read ISN
F Chasis N55 read ISN
F Chasis N63 read ISN
F Chasis S63 read ISN

Bench mode:

E Chasis TC1797 EDC17C41 read ISN
E Chasis TC1797 EDC17C50 read ISN
E Chasis TC1797 EDC17CP45 read ISN
E Chasis TC1797 MEVD17.2 read ISN
E Chasis TC1797 MEVD17.2.4 read ISN
E Chasis TC1797 MEVD17.2.6 read ISN
E Chasis TC1797 MEVD17.2.9 read ISN
E Chasis TC1797 MEVD17.2.P read ISN
E Chasis TC1796 MSD85 read ISN
E Chasis TC1796 MSV90 read ISN
F Chasis TC1797 EDC17C41 read ISN
F Chasis TC1797 EDC17C50 read ISN
F Chasis TC1797 EDC17C56 read ISN
F Chasis TC1797 EDC17CP45 read ISN
F Chasis TC1797 EDC17CP49 read ISN
F Chasis TC1797 MEVD17.2 read ISN
F Chasis TC1793 MEVD17.2.3 read ISN
F Chasis TC1797 MEVD17.2.4 read ISN
F Chasis TC1797 MEVD17.2.5 read ISN
F Chasis TC1797 MEVD17.2.6 read ISN
F Chasis TC1797 MEVD17.2.8 read ISN
F Chasis TC1797 MEVD17.2.9 read ISN
F Chasis TC1797 MEVD17.2.G read ISN
F Chasis TC1797 MEVD17.2.H read ISN
F Chasis TC1793 MEVD17.2.K read ISN
F Chasis TC1797 MEVD17.2.P read ISN
F Chasis TC1797 MEVD17.8.4 read ISN
F Chasis TC1796 MSD85 read ISN
F Chasis TC1796 MSD87 read ISN
F Chasis TC1796 MSV90 read ISN
I Chasis TC1793 MEVD17.2.3 read ISN
I Chasis TC1793 MEVD17.2.K read ISN
E Chasis TC1796 ME17.2.1 read ISN
E Chasis TC1796 MEV17.2.1 read ISN
E Chasis TC1796 EDC17CP09 read ISN
E Chasis TC1796 MSD81 read ISN
E Chasis TC1796 MSD80 read ISN
E Chasis TC1766 EDC17CP02 read ISN
E Chasis TC1766 EDC17CP09 read ISN
F Chasis TC1796 EDC17CP09 read ISN
F Chasis TC1796 MSD81 read ISN
F Chasis TC1796 MSD80 read ISN
F Chasis TC1766 EDC17CP09 read ISN
F Chasis TC1793 EDC17C76 read ISN
E Chasis TC1766 EDC17C06 read ISN
F Chasis TC1796 EDC17CP45 read ISN

Example: Bench mode read MSD80 ISN

Boot mode:

E Chasis TC1766 EDC17C06 read ISN
E Chasis TC1797 EDC17C41 read ISN
E Chasis TC1797 EDC17C50 read ISN
E Chasis TC1766 EDC17CP02 read ISN
E Chasis TC1796 EDC17CP09 read ISN
E Chasis TC1797 EDC17CP45 read ISN
E Chasis TC1797 MEVD17.2 read ISN
E Chasis TC1797 MEVD17.2.4 read ISN
E Chasis TC1797 MEVD17.2.6 read ISN
E Chasis TC1797 MEVD17.2.9 read ISN
E Chasis TC1796 MSD80 read ISN
E Chasis TC1796 MSD81 read ISN
E Chasis TC1796 MSD85 read ISN
E Chasis TC1796 MSV80 read ISN
F Chasis TC1797 EDC17C56 read ISN
F Chasis TC1797 EDC17CP49 read ISN
F Chasis TC1797 MEVD17.2.5 read ISN
F Chasis TC1797 MEVD17.2.8 read ISN
F Chasis TC1797 MEVD17.2.G read ISN
F Chasis TC1797 MEVD17.2.H read ISN
F Chasis TC1797 MEVD17.2.P read ISN
F Chasis TC1796 MSD87 read ISN
F Chasis TC1796 MSV90 read ISN
E Chasis TC1797 MEVD17.2.P read ISN
F Chasis TC1797 EDC17C41 read ISN
F Chasis TC1797 EDC17C50 read ISN
F Chasis TC1796 EDC17CP09 read ISN
F Chasis TC1797 EDC17CP45 read ISN
F Chasis TC1797 MEVD17.2 read ISN
F Chasis TC1797 MEVD17.2.4 read ISN
F Chasis TC1797 MEVD17.2.6 read ISN
F Chasis TC1797 MEVD17.2.9 read ISN
F Chasis TC1796 MSD85 read ISN
F Chasis TC1796 MSD80 read ISN
F Chasis TC1796 MSD81 read ISN
R Chasis TC1766 MED17.2 read ISN
R Chasis TC1766 MEV17.2 read ISN

Example: Boot mode read BMW EDC17C50 ISN

Here is the working solution to MB star diagnostic system SDConnect C4 Xentry online update Connection failed problem.

Problem:

I got the 06/2021 500G xentry hard drive for mb sd connect c4 doip. It failed to connect with network.

Report an error “online update Connection failed. The connection attempt has failed.”

Solution:

The error may be caused by wrong IP setting.

If connect SD C4 with WiFi, you should set IP address automatically.

If connect C4 via USB, manually set IP to

IP address: 172.29.127.1

Subnet mask: 255.255.255.0

Then connect c4 via WiFi.

Follow this way:

Go to Network Connections – Ethernet – Right-click Properties – select Internet Protocol Version 4 (ICP/IPv4) –
use the following IP address:

172.29.127.1

255.255.255.0

and save.

Related video:

MB SD C4 DoIP WiFi setting

https://youtu.be/zzini2YdxpQ

https://www.obdii365.com/service/solve-mb-sd-c4-xentry-online-update-connection.html

Offering the solution to OBDSTAR X300 DP Plus “[core03.bin] Load exception, error code: -101” (the error message is shown as below), especially after your subscription was expired from months.

PS: OBDSTAR X300 DP Plus = key master dp plus (green color full touch pad).

2 steps to solve the problem:

1. Click on”ES file browser” –local–Main directory–DP-serial number-Resource-core03.bin
   2. Copy the file of core03.bin to TF or memory card

Good to know:

When your OBDSTAR X300 DP Plus subscription was expired, highly recommend you subscribe the newest update service so that you keep with the newest car models and functions.

Here are one-year Software Update Renew Service for OBDSTAR X300 DP Plus full package (only 500usd):

https://www.obdii365.com/wholesale/obdstar-x300-dp-plus-c-package-one-year-software-subscription.html

Hope it helps!

 Question: 

However I tried the ISN code management in order to pull the ISN code has no luck. IM608 just showing communication failed ( just curious if in AKL position)

 

 

Question: 

I am ready to add a key to a 2015 VW Golf with Autel IM608, seems the server is down.

Gave error VW Server Computation Failed Error Code 1001.

Solution:

CG FC200 ECU Programmer & ISN OBD Reader, the full version of CG AT200, comes with all Authorization from CG AT200 without paying extra money. FC200 ECU programmer can perform ECU/ EGS clones, can process data, can read and write ISN, can perform disassembly matching, VIN modification and DTC shielding, etc.

CG FC200 ECU clone supported models: 4200 Kinds of ECU, 3 Types of operation modes, covering 80% of the models on the market

Look at CG FC200 authorization (all free activated):

B48 B58 ISN Read

BMW F-EGS_6HP Read/write data

N13/N20/N55/B38/TC17X Read Data (Bench)

N13/N20/N55/R38/TC17X write data (Bench)

Volkswagen Bosch MED17 series engine clone

B48 B58 read ISN (Bench)

Bosch Boot Read /Write data

VW/Audi EGS Read /Write data

Bosch ST10 (Boot) Read /Write data

MED17/EDC17 data process tool

MSD80/81/85/87/MSV90 Read /Write data

Mercedes SIM271 Read /Write data

MSV80 Read /Write data

MSD80/81/85/87MSV80/90 Write ISN

N20/N55 Write ISN (OBD)

FC200 supports both BMW ECU and over three thousands of ECUs reading and writing:

https://www.obdii365.com/upload/pro/21081016286461627418.xls

For more details on CG FC200, read CG FC200 user manual:

https://www.obdii365.com/upload/pro/21081016286460858141.pdf

And this page contains all CG AT200 authorization (optional and need to pay extra)

https://www.obdii365.com/producttags/cg-at200.html

Including

-MSV90 MSD85 MSD87 N2055 B38 B48 ECU Data reading, writing and clone

-BMW MSD80 MSD81 MSD85 MSD87 MSV80 MSV90 Write ISN, Backup and Restore Data

– Mercedes SIM271 Read/Write Data

– Volkswagen Bosch MED17 Series ECU Clone

– DQ200 Read/Write Data

Alright, this is a simple comparison between CG FC200 and CG AT200, hope it helps!

 TOYOTA Techstream V16.20.023 (08/2021) is newly tested working like a charm.

Techstream is the replacement for diagnostic tester. It combines the functionality of TIS and scantool in a single portable device. With TIS techstream, technicians can simultaneously view / analyze on-board vehicle data, review relevant TIS service documents, and reprogram vehicles from the driver’s seat via wireless connection to TIS.

Driver MVCI for x64 OS – Techstream 16.20.023 setup.exe Link:
https://yadi.sk/d/SkJ5W7dQLEhwSg

Password: NO PASS!!!

Size:  245MB

Version: Toyota Techstream V16.20.023 (08/2021)

Language: Chinese, Spanish, German, French, English, Italian, Japanese

Source: forum and need key by providing the ID and area.

Toyota Techstream V16.20.023 workable cable:

Mini VCI cable (both item no. SV46-D1 and item no. SV46-D at obdii365.com) for toyota-scion-lexus vehicles.

Toyota Techstream V16.20.023 Installation:

Part 1. install Techstream software

Open the folder of Toyota Techstream V16.20.023 [2021.08], then right

Click on “Toyota Techsteam V16.20.023” and select “Run as administrator.

Choose Setup Language.

Preparing setup.

Install Techstream Software on your computer.

Accept the terms of the license agreement.

Please enter your name and the name of the company for which you work.

Click on “Install”.

InstallShield Wizard has successfully installed Techstream software.

Part 2. Run TS_Loader

Right click on “Techstream” on the desktop and select “Open file location”.

Then right click on “TS_Loader” and select “Send to” Desktop (create shortcut)

Part 3. Open Toyota Techsteam V16.20.023 software

Select Area (Japan, North America, Europe, Other).

We select “North America” and then “English”, then enter the dealer name, dealer code and dealer phone in the Techstream Configuration.

Open the software of Toyota Techsteam V16.20.023 and ready to use.

You can configure the area and language.

That’s all.

Thanks

www.obdii365.com

 Problem:

Toyota Corolla 2020 Add key failed with lonsdor k518ise. Failed on 2019 as well.

Solution:

Lonsdor cannot make key for Corolla 2019/2020 because the chip is 4E.

Don’t work even with subscription and emulator. Lonsdor is good with 4D 8A (H) but not 4E.

It will ask for a key code from dealer.

 Xtool tablets released new upgrade adding 2015-2018 Jaguar/Land Rover all smart keys lost/add key via OBD bypass PIN code in July 2021. Here is a demo guide on adding a spare smart key with xtool x100 pad2. All keys lost is similar to add key procedure. Same update goes to x100 pad3, a80 h6 pro etc.

1 Generate smart key

generate smart remote with keydiy remote and kd-x2 remote maker
Select Land rover – Landrover ID49 433MHz – Generate

Generate remote successfully
Test both keys to read ID

2.Program key with xtool x100 pad 2

Select Land rover in x100pad2, Land rover 2015-2018 – Read key ID

Put the key to be read into the KC100 adapter

Select add key By OBD

Select Yes if you have 1 working key
To perform add key function, 1). you must have an unlocked original car key 2). only supports the sub-factory key whose ID can be changed or the key generated by the salve machine

Delect vehicle KVM type FK72
Put original key in KC100

Read key ID from original key

Then put new key into KC100

original key is stored at this position key ID:0F687F35

we will use this position (ID:05677f35) to store new key as the key is lost and no longer available
select this key position

Select No if we don’t want to add any other key

program success

test both keys, remote all working, both can start car.
Done.

http://www.key-programmer.org/2021/08/09/program-land-rover-2015-2018-smart-key-with-xtool-x100-pad2/

 Problem:

Can anyone help me please? My xtool x100 pro2 was working good so I wanted to update it but it didn’t work so I format it and now is not working at all.

Solution:

It is working now. Hold down this button, then connect the USB to update again.

follow the guide here to update Xtool Xtool Pro2 via PC

https://www.obdii365.com/service/update-xtool-x100-pro2-tp200-x300p.html

http://www.key-programmer.org/2021/08/06/solve-xtool-x100-pro2-blank-screen-problem/

Problem:

I recently got the Super MB Pro M6 with 06/2021 xentry hard drive.  Unfortunately, this error message comes when reading a Mercedes GLC253.

"XENTRY Diagnosis data areas are incomplete or incorrect", error pictures attached:

Solution and Feedback:

Problem:

I have a problem with my Autel MK808. Purchased 3 days ago. Worked fine. Today I can't see nothing in the diagnostics and service menus. I have done all the system updates. Any advice appreciated.

Before the update I did a factory reset. Still not working. Then I connect to the internet, update all the car manufacturers fixed my problem. Worked for me.
i have started to update all car makes and BMW and Mini + the service options came back ...i guess i'll have to update all of them to make it work again.
just started updating the car manufacturers, i can see BMW and Mini back in the Diagnostics menu and Service Options for them came back as well ...i guess ill have to update all of them.