Overblog
Editer l'article Suivre ce blog Administration + Créer mon blog
OBD2 Diagnostic Tools

How to Solve Scania SDP3 Wrong Hardware ID?

29 Juillet 2021 , Rédigé par JTAC Publié dans #scania sdp3

 Problem:

I was required to send a hardware ID to activate the Scania SDP3 4.28.2 software for my VCI3 interface. I did provide the ID but was told the ID is incorrect. How to find the correct HWID?

scania-sdp3-wrong-id

OBDII365 Solution:

The wrong ID may be caused by not well-installed Prerequisites.cmd file or incompatible operating system. 

scania-sdp3-wrong-id-solution-1

Windows 7 or 8 is recommended.

Windows 10 is not recommended because some of it's releases does not support it.

Pay attention to the warning message after run Prerequisites.cmd.

Restart the computer after the operation is completed successfully. 

scania-sdp3-wrong-id-solution-2

Check Video guide: How to install and activation Scania SDP3?

Partager cet article
Repost0
Pour être informé des derniers articles, inscrivez vous :
Commenter cet article