Overblog
Suivre ce blog Administration + Créer mon blog
OBD2 Diagnostic Tools

autel im608

Program Mercedes W164 2010 Key by Autel IM608Pro via OBD

23 Septembre 2021 , Rédigé par JTAC Publié dans #autel im608

 How to use Autel MaxiIM IM608 Pro to add a spare key on Mercedes 2010 ML350 EIS type W164 via OBD without G box.

 

Program Benz 2010 ML350 W164 Key with Autel IM608 1

 

 

Program Benz 2010 ML350 W164 Key with Autel IM608 2

 

Program Benz 2010 ML350 W164 Key with Autel IM608 3

 

Go to IMMO- Mercedes Benz – Smart Selection – Add Key – On vehicle

 

Program Benz 2010 ML350 W164 Key with Autel IM608 4


Confirm vehicle information

 

 

Program Benz 2010 ML350 W164 Key with Autel IM608 5


Follow these steps to add a key

 

Read EIS data

 

Program Benz 2010 ML350 W164 Key with Autel IM608 6


Insert the ignition key into the IR key hole on the xp400 programmer
Read ignition key
Read blank key information

 

 

Program Benz 2010 ML350 W164 Key with Autel IM608 7


Insert the blank key (BE key with key shell) into the IR key hole on the xp400 pro programmer
Calculate password

 

 

Program Benz 2010 ML350 W164 Key with Autel IM608 8

 

Program Benz 2010 ML350 W164 Key with Autel IM608 9

 

Program Benz 2010 ML350 W164 Key with Autel IM608 10

 

follow these steps to calculate password

calculate password via OBD takes about 10-30 mins

 

Program Benz 2010 ML350 W164 Key with Autel IM608 11

 

Program Benz 2010 ML350 W164 Key with Autel IM608 12

 

Program Benz 2010 ML350 W164 Key with Autel IM608 13

 

read password success. Start to add key.
Generate key file
Write key file

 

Program Benz 2010 ML350 W164 Key with Autel IM608 14


Add key successfully with im608 pro
Insert new key into the EIS. If the red indicator lamp on the key lights up and goes off, key learning is successful.
Turn the ignition on and check if the vehicle can be started normally. If the vehicle is not started normally, the key addition failed.

 

Check if the remote lock and unlock functions can work normally, if not, check if the key battery can work normally.

 

Program Benz 2010 ML350 W164 Key with Autel IM608 15

 

Program Benz 2010 ML350 W164 Key with Autel IM608 16

 

 

Done.

Lire la suite

How to Fix Autel IM608 Screen Stuck on Boot Logo?

29 Août 2021 , Rédigé par JTAC Publié dans #autel im608

 Problem:

Autel MaxiIM IM608 Screen Stuck on Boot Logo
Autel IM608 Screen Stuck on Boot Logo
Solution:
 
Send us the Serial Number
Got the offer of a zipped file “autel_odm.zip”
Unzip this file and put it
under the root directory
Insert the SD card back into the device
Reboot the device.
This will help you tackle this error, if that fails, try the processing method as below:
Remove any micro SD card if one is installed, and restart the tablet. Make sure the MaxiIM IM608 is charged.
If this operation does not work, please do the following:
1. Connect your tablet to your Win PC via USB line;
2. Open the USB storage and wait for several minutes.
3. Then turn off and disconnect the USB connection:
4. Restart the tablet.
 
http://www.key-programmer.org/2021/08/30/solve-autel-im608-screen-stuck-on-boot-logo/
Lire la suite

Autel MaxiIM IM508 IM608 BMW ISN List

27 Août 2021 , Rédigé par JTAC Publié dans #autel im608

Autel MaxiIM IM508/IM608/IM608 Pro can read BMW ISN from DME in 3 modes: via OBD, on bench and boot mode.  Obdii365.com here provides a supported ISN list of MaxiIM tools.

 

OBD mode:

E Chasis M54 read ISN
E Chasis M57 read ISN
E Chasis N45 read ISN
E Chasis N46 read ISN
E Chasis N52-MSV70 read ISN
E Chasis N62 read ISN
E Chasis N73 read ISN
E Chasis S65 read ISN
E Chasis N20 read ISN
E Chasis N47 read ISN
E Chasis N55 read ISN
E Chasis N57 read ISN
E Chasis N43 read ISN
E Chasis N51 read ISN
E Chasis N52-MSV80 read ISN (CGDI MSV80)
E Chasis N53/N54 read ISN
E Chasis N63 read ISN
E Chasis S63 read ISN
F Chasis B48 read ISN
F Chasis B58 read ISN
F Chasis N13 read ISN
F Chasis N20 read ISN
F Chasis N55 read ISN
F Chasis N63 read ISN
F Chasis S63 read ISN

 

 

Bench mode:

E Chasis TC1797 EDC17C41 read ISN
E Chasis TC1797 EDC17C50 read ISN
E Chasis TC1797 EDC17CP45 read ISN
E Chasis TC1797 MEVD17.2 read ISN
E Chasis TC1797 MEVD17.2.4 read ISN
E Chasis TC1797 MEVD17.2.6 read ISN
E Chasis TC1797 MEVD17.2.9 read ISN
E Chasis TC1797 MEVD17.2.P read ISN
E Chasis TC1796 MSD85 read ISN
E Chasis TC1796 MSV90 read ISN
F Chasis TC1797 EDC17C41 read ISN
F Chasis TC1797 EDC17C50 read ISN
F Chasis TC1797 EDC17C56 read ISN
F Chasis TC1797 EDC17CP45 read ISN
F Chasis TC1797 EDC17CP49 read ISN
F Chasis TC1797 MEVD17.2 read ISN
F Chasis TC1793 MEVD17.2.3 read ISN
F Chasis TC1797 MEVD17.2.4 read ISN
F Chasis TC1797 MEVD17.2.5 read ISN
F Chasis TC1797 MEVD17.2.6 read ISN
F Chasis TC1797 MEVD17.2.8 read ISN
F Chasis TC1797 MEVD17.2.9 read ISN
F Chasis TC1797 MEVD17.2.G read ISN
F Chasis TC1797 MEVD17.2.H read ISN
F Chasis TC1793 MEVD17.2.K read ISN
F Chasis TC1797 MEVD17.2.P read ISN
F Chasis TC1797 MEVD17.8.4 read ISN
F Chasis TC1796 MSD85 read ISN
F Chasis TC1796 MSD87 read ISN
F Chasis TC1796 MSV90 read ISN
I Chasis TC1793 MEVD17.2.3 read ISN
I Chasis TC1793 MEVD17.2.K read ISN
E Chasis TC1796 ME17.2.1 read ISN
E Chasis TC1796 MEV17.2.1 read ISN
E Chasis TC1796 EDC17CP09 read ISN
E Chasis TC1796 MSD81 read ISN
E Chasis TC1796 MSD80 read ISN
E Chasis TC1766 EDC17CP02 read ISN
E Chasis TC1766 EDC17CP09 read ISN
F Chasis TC1796 EDC17CP09 read ISN
F Chasis TC1796 MSD81 read ISN
F Chasis TC1796 MSD80 read ISN
F Chasis TC1766 EDC17CP09 read ISN
F Chasis TC1793 EDC17C76 read ISN
E Chasis TC1766 EDC17C06 read ISN
F Chasis TC1796 EDC17CP45 read ISN

Example: Bench mode read MSD80 ISN

 

 

Boot mode:

E Chasis TC1766 EDC17C06 read ISN
E Chasis TC1797 EDC17C41 read ISN
E Chasis TC1797 EDC17C50 read ISN
E Chasis TC1766 EDC17CP02 read ISN
E Chasis TC1796 EDC17CP09 read ISN
E Chasis TC1797 EDC17CP45 read ISN
E Chasis TC1797 MEVD17.2 read ISN
E Chasis TC1797 MEVD17.2.4 read ISN
E Chasis TC1797 MEVD17.2.6 read ISN
E Chasis TC1797 MEVD17.2.9 read ISN
E Chasis TC1796 MSD80 read ISN
E Chasis TC1796 MSD81 read ISN
E Chasis TC1796 MSD85 read ISN
E Chasis TC1796 MSV80 read ISN
F Chasis TC1797 EDC17C56 read ISN
F Chasis TC1797 EDC17CP49 read ISN
F Chasis TC1797 MEVD17.2.5 read ISN
F Chasis TC1797 MEVD17.2.8 read ISN
F Chasis TC1797 MEVD17.2.G read ISN
F Chasis TC1797 MEVD17.2.H read ISN
F Chasis TC1797 MEVD17.2.P read ISN
F Chasis TC1796 MSD87 read ISN
F Chasis TC1796 MSV90 read ISN
E Chasis TC1797 MEVD17.2.P read ISN
F Chasis TC1797 EDC17C41 read ISN
F Chasis TC1797 EDC17C50 read ISN
F Chasis TC1796 EDC17CP09 read ISN
F Chasis TC1797 EDC17CP45 read ISN
F Chasis TC1797 MEVD17.2 read ISN
F Chasis TC1797 MEVD17.2.4 read ISN
F Chasis TC1797 MEVD17.2.6 read ISN
F Chasis TC1797 MEVD17.2.9 read ISN
F Chasis TC1796 MSD85 read ISN
F Chasis TC1796 MSD80 read ISN
F Chasis TC1796 MSD81 read ISN
R Chasis TC1766 MED17.2 read ISN
R Chasis TC1766 MEV17.2 read ISN

Example: Boot mode read BMW EDC17C50 ISN

Lire la suite

How to Solve Autel IM608 Failed to Read ISN for BMW F48 AKL?

19 Août 2021 , Rédigé par JTAC Publié dans #autel im608

 Question: 

Autel im608 has programmed a new key on a 2017 BMW 330i fem system (engine code is F48) successfully.  On bench with a FEM test platform.
However I tried the ISN code management in order to pull the ISN code has no luck. IM608 just showing communication failed ( just curious if in AKL position)
 
Autel IM608 cannot Read BMW FEM ISN Code Solution 1
 
Autel IM608 cannot Read BMW FEM ISN Code Solution 2
Customer working solution:
 
 increased voltage to dme to 13.2 v and it read it.
12v charge cable in van, start van and let alternator bring voltage up.
You can have three of these wired into the back of my van (one with voltmeter, two without) wired up to two leisure batteries, they read leisure battery voltage, but when I need to pull isn from dme, sometimes it fails, i then start the van, let the alternator (via split charge relay) get the voltage up and then read dme again.
You can never have too many charge ports in the back of your van
 
Autel IM608 cannot Read BMW FEM ISN Code Solution 3
Lire la suite

How to Solve Autel IM508 IM608 VW Server Computation Failed Error?

12 Août 2021 , Rédigé par JTAC Publié dans #autel im608, #autel im508

Question: 

I am ready to add a key to a 2015 VW Golf with Autel IM608, seems the server is down.

Gave error VW Server Computation Failed Error Code 1001.

 

Autel MaxiIM VW Server Computation Failed

 

 

Solution:

Nothing wrong with the message. Just follow instructions.
Extract vin, supply vin details to your supplier of your autel maxiim machine, supplier contacts autel. autel contacts vw, vw send data to autel, autel sends data to your machine.
Usually wait for 24-48 hours.
Then do key learning via Advanced mode.
 
Lire la suite

How to Set up TeamViewer Remote Support from Autel IM608?

28 Juillet 2021 , Rédigé par JTAC Publié dans #autel im608

To remotely connect to the Autel tablet device, here we use Autel IM608 as a demo to show the procedure.

 

Autel IM508 IM608 Teamviewer 1

 

Open Remote Desk Teamview Program.

Make sure your tablet is connected ti the network before doing the Teamviewer.

After entering the software, stay in the below page until the end.

Autel IM508 IM608 Teamviewer 2

Page from the other side (PC end)to connect your tablet shown as below.

Autel IM508 IM608 Teamviewer 3

Input the Teamviewer ID from the tablet then click Connect

Autel IM508 IM608 Teamviewer 4

Click Allow so your tablet will be remotely logged in from the other side.

Autel IM508 IM608 Teamviewer 5

Now your device has been connected.

www.obdii365.com

 https://www.obdii365.com/service/get-autel-im608-teamviewer-remote-support.html

Lire la suite

Which Tool to Program Audi A4 RB8 All Keys Lost?

7 Juillet 2021 , Rédigé par JTAC Publié dans #autel im608

 Question:

Anyone successfully done Audi A4 RB8 cluster all key lost with Autel IM608? If so how?
 
audi-a4-rb8-cluster
Suggestion:

IM608 Yes:
Get immo data, make dealer key, not learn key. I made few days ago RB8. Not learn key, there was an option “Add key”. You need to put dealer key into programmer and autel automatically adding key to clusters. Try, but not always work.

VVDI2 or Key Tool Plus Yes:
Vvdi2 straight in. Xhorse beats Autel in Audi and VW.
Done with vvdi2, Autel needs to do something on that car.

Lire la suite

Which Tool to Precode Clio 4 2017 Dealer Key AKL?

28 Juin 2021 , Rédigé par JTAC Publié dans #autel im608

Car model and year:

Clio 4 2017 AKL, the card Hitag AES 7953

 

Purpose:

Try to make dealer card.

I had 2 genuine renewed cards with Keydiy both is the same

 

How to do? Here are some reviews for sharing:

Review 1.

Done a 2014 with 4a.

Had with original renewed, it didn’t worked. Next day had one brand new aftermarket worked no problems.

 

Review 2.

Last week i’ve renewed two Clio IV cards (pcf7953 ID4A) with Vvdi Keytool and programmed to two different cars: one was Captur and one Clio IV. Programmed with Autel IM608 without problems, and i haven’t made dealer key, i’ve always programmed Renault cards without precoding them, both renewed or aftermarket..

Captur was 2015 and Clio 2016, Autel programmed no problem without any precoding. When it asks if I need to make dealer key i press No and normally programmed.
Also done a Clio 2018 with an aftermarket card without precoding

 

Good to know:

No need to precode if you add card

When is AKL you need to pre code the card

That is the way that SmartPro work on the Autel I can’t trust for this car AKL and think that can’t do AKL by OBD.

==== If you have VVDI mini Key tool with renew cable they work ok for unlock clio4 card’s. Tested and work 100%.

 

Review 3.

Those Clio and Captur after 2015 are a big mystery. I’ve seen and experienced by myself similar problems. Zed-Full, Lonsdor and even R.E.T couldn’t program card (same type error message like ‘wrong card’ ). Try renolink, it seems reliable… But you need PIN code read by other tools first.

 

Related operation guide

Program Renault Clio IV 2018 all keys lost with obdstart X300 DP Plus

Lire la suite

How to use Autel IM608 to Renew Mercedes BE Key?

20 Juin 2021 , Rédigé par JTAC Publié dans #autel im608

 Autel IM608/IM508 can renew Mercedes BE aftermarket Key and WRITE the new Key File. Here is the BE key renew procedure with MaxiIM tools.

 

autel-im608-renew-be-key-1

 

 

Insert BE key into IR hole of xp400 pro

 

autel-im608-renew-be-key-2

 

 

select IMMO-> Mercedes-Benz->Expert Selection->Key->IR->Repair key

 

autel-im608-renew-be-key-3

 

autel-im608-renew-be-key-4

 

autel-im608-renew-be-key-5

 

autel-im608-renew-be-key-6

 

autel-im608-renew-be-key-7

 

Read key information, key was programmed.

 

autel-im608-renew-be-key-8

 

 

Select Renew BE key function and confirm to clear key

 

autel-im608-renew-be-key-9

 

autel-im608-renew-be-key-10

 

 

Clear the BE key successfully

 

autel-im608-renew-be-key-11

 

Read key information again
Now the BE key was renewed and can be programmed to another Mercedes.

autel-im608-renew-be-key-12

www.obdii365.com

Lire la suite

Reset Toyota Avanza 2017 SRS R5F2154 by Autel XP400?

16 Juin 2021 , Rédigé par JTAC Publié dans #autel im608

This is a Toyota Avanza 2017 airbag module with Renesas R5F2154 MCU

Successfully read data by autel im608 xp400 programmer. 

Select chip then autel will give you a wiring diagram. 

SRS module clearing crash data success. 

autel-xp400-toyota-avanza-airbag-reset-1

 

autel-xp400-toyota-avanza-airbag-reset-2

 

autel-xp400-toyota-avanza-airbag-reset-3

 

autel-xp400-toyota-avanza-airbag-reset-4

 

autel-xp400-toyota-avanza-airbag-reset-5

 

autel-xp400-toyota-avanza-airbag-reset-6

 

autel-xp400-toyota-avanza-airbag-reset-7

 

autel-xp400-toyota-avanza-airbag-reset-8
Lire la suite

Program Spare Key for 2020 Sentra using Autel 16-32 Adapter?

14 Juin 2021 , Rédigé par JTAC Publié dans #autel im608

 Here is a list of questions to ask:

1). Has anyone tried out the new Nissan gateway cable yet? Will it allow us to add keys to the 2021 Nissan Rogue?

2) AKL on 2020 Nissan Sentra – needs the 16 + 32 SGW adaptor. Anyone use this yet? what I’ve read I’ll need to get the PIN as well since it cannot extract it.

3) Can IM608 works with Nissan Sentra that has secure gateway. IM608 says the 16 + 32 cable working

4). Who been able to program spare key for 20020 sentra using the 16-32 adapter? I try today but not go.

 

 

Autel Nissan 16+32 Bypass cable:

Autel Nissan 16+32 Secure Gateway Adaptor for Autel MaxiIM IM608 and IM508

This cable is designed to be used with Nissan Sentra 2021+ and other models 8th Generation with B18 Chassis.

Add key (Bypass PIN Code) for Sylphy Micra and Sentra of 2021 Nissan

 

autel-nissan-16-32-cable-1

autel-nissan-16-32-cable-2

 

 

Suggestions:

1.Autel techniscan claimed it’s only for European Nissan but not USA model.  Add key only in EUROPEAN. Not for American market yet.

2. Add key only with the bypass cable with 1 working key.

3. Only with Autel 16pin-32pin cable and it’s only for add a key not all keys lost.

With 16+32 gateway adapter, it doesn’t need the password when adding new key for Sylphy, Sentra and the car with B18 chassis.
Note: If all keys lost, it will require password to program new key. You need to get the PIN from an outside source since the tool won’t extract it.

 

it clearly shows in the screen
IM608 is asking for the gateway connector 16+32.

autel-nissan-16-32-cable-3

The “Controller Assembly–Central Gateway” is behind the instrument cluster. Vehicle disassembly is not necessary–the connectors can be accessed by reaching high above the brake pedal.
There’s a 32-pin connector, a 12-pin connector, and two coaxial connectors.
The 32-pin fits into the new Autel 16+32 cable.

 

Vehicle ignition is on (can’t start car with gateway unplugged, but can turn ignition on)
J2534 OBDII to the 16/32 cable
32-pin to the gateway cable
J2534 to cigarette lighter

autel-nissan-16-32-cable-4

autel-nissan-16-32-cable-5

http://blog.obdii365.com/2021/06/13/autel-nissan1632-bypass-cable-working-or-not/

Lire la suite

Autel IM608 Requires PIN to Add Toyota Rav4 2019 Key

10 Juin 2021 , Rédigé par JTAC Publié dans #autel im608

 Problem:

I am trying to add a key on a 2019 Toyota Rav4 but Autel IM608 asks for a 12-digit pin I would appreciate if someone could help me find it or sell it to me.

 

autel-im608-toyota-rav4-key

 

Solution:

Need NASTF subscription for access code.

check here : how to get access code?

 

If have Lonsdor K518ISE, just purchase Toyota AKL license and dedicated smart key, RAV4 2019-2021 all keys lost can be done via OBD.

 

Check the detail guide here:

https://www.obdii365.com/service/program-2019-2021-toyota-all-keys-lost-with-lonsdor-k518ise.html

Lire la suite