KTAG firmware 7.020 vs K-TAG firmware 7.003

KTAG fw 7.020 updated!! So, here list differences between the new v2.23 Ktag KTM100 fw 7.020 and old v2.13 K-tag KTM100 fw 7.003. Ktag ktm100 fw 7.020 highlights Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276 ECU, Toyota 76F, etc.

Firmware version:

2016 K-TAG firmware 7.003

2017 KTAG 7.020 firmware

Software version:

K-tag ktm100 v2.13

K-tag ktm100 v2.23

Language:

KTAG fw 7.003: English, Italian, Portuguese

KTAG 7.020: English, Italian, Portuguese, French, Deutsch, Spanish

ECU wiring diagram:

Ktag master V7.020 displays diagrams in words, not pictures

K-TAG KTM100 ECU list:

KTAG fw 7.020 adds 100+ ECU types

KTAG KTM100 car list:

KTAG firmware 7.020 supports new car models e.g. Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276 ECU, Toyota 76F, etc.

How to update Ktag fw 7.003 to Ktag fw V7.020:

If you have the old firmware Ktag KTM100 7.003, you can send the whole package back to rework to firmware 7.020 (Cost 140USD, not including shipping)

If need a brand new ktag fw7.020, you could go to

http://www.obdii365.com/wholesale/v2-23-ktag-ktm100-ecu-programming-tool.html

ktag fw7.020 price: 425 USD

How to use Ktag ktm100 firmware 7.020:

- How to reset the tokens?

KTAG Has Unlimited Tokens, We Add a Renew Button.

When the tokens use up, insert the USB into the computer and the red indicator flashes, then press the Reset button, wait until the indicator flashes off, unplug the USB cable and again insert the USB cable to the computer, now you have 30 tokens.

- How to get ECU wiring diagram?

When I open the Ktag master V7.020 diagram, it displays in words not pictures.

In the diagrams, there are some words in different colors, click it you will see the diagram. (Take the following picture for example, click the blue “Here” you can see the connection instructions)

- How to connect Ktag ktm100 to the ECU and laptop?

1. 

   
   GREEN-CAN L
2. 2.ORANGE-VKEY
   3.YELLOW-K LINE
   4.ORANGE-VKEY
   5. RED-VECU
   6.BLACK-GND
   7.BLACK-GND
   8.PURPLE-VPP
   9.RED-VECU
   10.WHITE-CAN H

Ktag KTM100 PCB Display:

Ktag v7.020 ecu programmer review:

I confirm the new KTM100 K-TAG is compatible with J-Tag, but in a completely different way. Usually J-Tag programmers are available only for big productions, never present in chip tuning devices. Using only the essential components, Alientech have merged J-Tag, Motorola BDM/Nexus and Bootloader Mitsubishi/Infineon Tricore/ST communication lines into a single product.

This KTM100 K-TAG works perfectly. It’s easy to learn how to use K-TAG takes almost no time, because all the communication protocols operate along similar principles. Once you have learned to use a protocol, you will naturally use all the others. Alientech knows what it means to work in motion. For this reason the research methods of the protocols and choice of vehicles are detailed and ordered.

Unlike many ECU programming tools, with K-TAG you have at your disposal only the applications you really need. Once you have the hardware, you can choose which group of protocols to enable and then start working. In this page you can find a complete list of the ECU currently supported by K-TAG.