foxflash - OBD2 Diagnostic Tools

How to Get Foxflash GPEC2 GPEC2A OBD Unlock Patch?

2 Novembre 2023 , Rédigé par JTAC Publié dans #foxflash

FoxFlash ECU TCU tool is now able to perform the OBD unlock patch for Chrysler GPEC2 & GPEC2A PCMs.

OBD unlock patch
November 02, 2023

foxFlash is now able to perform the following operations:
OBD unlock patch
On the following ECU references:
Continental GPEC2 & GPEC2A
Jeep 2.4 Tigershark 184 hp
Jeep 3.2 Pentastar V6 275 hp
Jeep / Lancia 3.6 Pentastar V6 285 hp
Dodge 3.6 Pentastar V6 292 hp
Chrysler / Dodge / Jeep 3.6 Pentastar V6 296 hp
Chrysler / Dodge 3.6 Pentastar V6 305 hp
Jeep 3.6 v6 284 hp
Dodge 3.6 v6 305 hp
Fiat / Lancia 3.6 V6 280 hp
Dodge 5.7 V8 369 hp
Dodge 5.7 V8 HEMI 370 hp
Dodge / Jeep 5.7i 360 hp
Dodge 5.7i 390 hp
Dodge 5.7i 400 hp
Jeep 5.7i cylinder desact. 365 hp
Dodge 5.7i V8 eTorque 395 hp
Dodge 5.7i V8 HEMI 365 hp
Dodge 5.7i V8 HEMI 379 hp
Dodge 5.7i V8 HEMI 388 hp
Dodge / Jeep 6.1 SRT8 425 hp
Jeep 6.2 Hemi V8 707 hp
Dodge 6.2 V8 Hellcat 717 hp
Dodge 6.2 V8 SUPERCHARGED (TRX) 710 hp
Dodge 6.4 V8 410 hp
Chrysler / Dodge / Jeep 6.4 V8 SRT8 477 hp
Dodge 6.4 V8 SRT8 482 hp
Dodge 6.4 V8 Apache 492 hp

How to Unlock GPEC2 GPEC2A PCM with Foxflash?

send the file to fox flash they do the unlock for free.

Method:
use BOOT TOOLS BOX
1: Read out the INTFLASH and EPROM
2: zip the file and send to email INFO@DFB-TECHNOLOGY.COM
3: we send back the patched file
4: user write back the Intflash
5:OBD then unlocked (some hptuner can direct tune car with this function).

CONTINENTAL GPEC2A – FCA, Dodge [ SPC5674 ] Boot Pinout

Connect with the multifunction cable the CNF1 on the pcb.
Use the driver:
→ TOOLS BOOT MODE
→ MOTOROLA FREESCALE BAM
→ CONTINENTAL GPEC2A

Repost0

How to Modify Foxflash Jtag Ribbon Cable?

11 Janvier 2023 , Rédigé par JTAC Publié dans #foxflash

If your Foxflash ecu programmer ribbon cable is not correctly orientated then it will not function for bdm/jtag work. You can modify the cable by removing the connector keyway so that the cable plugs into the Foxflash unit in correct orientation.

Follow images below:

FoxFlash Read and Write Chrysler EDC17C79

8 Décembre 2022 , Rédigé par JTAC Publié dans #foxflash

I’m impressed dodge edc17c79 bench mode, flex couldn’t read it bench or recognize it, I had to boot it. Foxflash did it. Just the diagram has two ways can be connected. mine needed another black negative like under the white pin.

FoxFlash Read and Write Dodge EDC17C79 on Bench 4

FoxFlash Read and Write Dodge EDC17C79 on Bench 1

FoxFlash Read and Write Dodge EDC17C79 on Bench 2

FoxFlash Read and Write Dodge EDC17C79 on Bench 3

How to Solve FoxFlash Error Cannot Find DFB2XX.Dll?

1 Décembre 2022 , Rédigé par JTAC Publié dans #foxflash

I recevied the Foxflash and try to download Foxflash manager software. But it failed me and shows error cannot find dbf2xx.dll, re-install this application. Any solution.

Solution:

The problem usually occurs on 32bit operating system.

Go to FoxFlash/DFBTech_DRIVER/amd64 folder, copy and paste all files in this folder to C:/Windows/SysWOW64 folder

Better set it up on 64bit system.

How to Activate FoxFlash Software on 3 PC?

29 Novembre 2022 , Rédigé par JTAC Publié dans #foxflash

Possible to install and activate FoxFlash manager software on another laptop? Will it be possible to use on 2-3 computers? It would be great for us who are multiple persons in 1 company. As well for us who work outside the workshop.

Yes, you can set up foxflash manager app on up to 3 laptops.

Version 1.3.0 of the FoxFlash Manager is now available. The manager has been improved and now 3 computers to 1 tool.

Download latest FoxFlash manager on https://www.dfb-technology.com/

After download, restart foxflash Manager, install drivers.

Your tool can now be used on a total of 3 computers without need to unbind.

It’s automatic now , needn’t send email for active 3 pcs.

1 tool can bind at 3 pc at the same time now. Use the same email tool links.