Audi Q5, A6, A8 hybrid P1609 crash shut-down problem can be solved by OBDSTAR P50. 

Processor:

8R0915591  8R0 915 591

8R0915223  8R0.915.233

Problems:

•     Engine don't start.
•     Hybrid system is locked.

Battery Energy Control Module (Hybrid Battery Module)

Possible Causes

•     Crash Signal activated (i.e. Accident with Airbag Deployment)

Fault Code

• 14806 - Crash Shut-Down Activated
• P1609 00 [039] - -

No need to replace battery. Two solutions.

1.ODIS. 

Restart High Voltage system.  First you need to remove crash data from the airbag module and then with odis you can disable the protection in the battery.

2. with OBDSTAR P50

OBDSTAR P50 will reset and repair 8R0915591 and 8R0915223 processor on bench. 

 Xtool released a Xtool AnyToyo SK1 adapter to bypass 2013-2022 Toyta/Lexus 8A and 4A smart key pin code.

What is Xtool AnyToyo SK1 Emulator?

XTool AnyToyo SK1 is a data collector as well as a smart key emulator, allows you to do key cloning process in both add key / all keys lost situations for 2013+ Toyota models with smart key. AnyToyo SK1 can also do emergency start when there is no key available on your hand and generate new keys using AnyToyo smart key that comes with the set.

What is the difference between xtool anytoyo and other bypass solution (Autel OBDSTAR Lonsdor)?

• Protect data in smart box, still support OEM key programming after copy keys.
• OEM-level key chip with excellent compatibility 

With this can I add key instead of all keys lost?
AnyToyo SK1 can do both add key and all key lost.

Can i use the ks01 instead of the AnyToyo SK1 data collector? Would this replace the xtool ks1 emulator?
No, it’s not a replacement. AnyToyoSK1 is an upgrade version.

What xtool tablets can i use with Xtool AnyToyo?

XTool AnyToyo SK1  you need works with

Xtool Key Programming Device: Must support KC100 / KC501.

Compatible with XTOOL Scanner+KC100/KC501:

For XTOOL D8, D8 BT, D9 PRO, D9 EV, A80 PRO Master, PS90, X100 PAD2, X100 PAD3, Inplus IP616, IP819, IK618, X100 MAX, Turbo Gscan2, etc.

Xtool AnyToyo User Manual

Xtool AnyToyo SK1 supports following models

8A-82

2013 – 2018 Toyota Avalon
2012 – 2017 Toyota Camry
2012 – 2017 Toyota Camry Hybrid
2014 – 2019 Toyota Corolla
2013 – 2018 Toyota RAV4
2012 – 2019 Toyota Prius C
2016 – 2017 Toyota Prius V
2016 – 2018 Toyota RAV4 HV
2018 + Toyota Crown
2016 – 2019 Toyota MIRAI
2017 – 2019 Toyota Highlander
2016 – 2018 Toyota Land Cruiser
2012 – 2015 Toyota Prius C
2019 – 2021 Toyota Sequoia
2015 – 2021 Toyota Tacoma
2019 – 2021 Toyota Tundra
2020 – 2021 Toyota 4Runner
2013 – 2018 Lexus ES300h
2013 – 2017 Lexus ES350
2013 – 2020 Lexus GS350
2013 – 2016 Lexus GS450H
2016 – 2018 Lexus GS-F
2019 Lexus NX300
2015 – 2019 Lexus NX300H
2015 – 2019 Lexus NX200T
Late 2016 – 2019 Lexus LX570
2014 – 2019 Lexus RCF
2014 – 2016 Lexus IS250
2014 – 2018 Lexus IS350
2015 – 2016 Lexus RC350
2016 – 2017 Lexus IS200T
2017 – 2017 Lexus IS200
2013 – 2018 Lexus ES300h

8A-85

2017 + Toyota Alphard
2017 + Toyota Vellfire
2019 – 2020 Toyota RAV4 (US production)
2016 – 2021 Toyota Prius
2018 – 2020 Toyota Camry (US Production)
2018 + Toyota CH-R
2020 – 2021 Toyota Land Cruiser
2018 + Lexus RX

8A-88

2019 + Toyota Avalon
2018 + Toyota Camry
2018 + Toyota C-HR
2018 + Toyota Izoa
2019 + Toyota Crown Kluger
2019 + Toyota Hiace
2019 + Toyota Highlander
2019 + Toyota Kluger
2021 Toyota Mirai
2018 + Toyota Prius
2019 + Toyota RAV4
2019 + Toyota Wildlander
2021 Lexus ES250
2019 – 2020 Lexus ES300h
2019 – 2020 Lexus ES350
2019 – 2020 Lexus ES350h
2018 – 2020 Lexus LS500
2018 – 2020 Lexus LS500h
2019 – 2022 Lexus UX200
2019 – 2022 Lexus UX250h
2021 – 2022 Lexus GX460
2018 + Lexus GS

4A

2019 + Toyota Corolla
2019 + Toyota Corolla Touring
2019 + Toyota Corolla Sport
2019 + Toyota Corolla Cross
2019 + Toyota Corolla Altis
2019 + Toyota Levin
2019 + Toyota Auris
2019 + Toyota Allion

How to use AnyToyo SK1 emulator?

How to program Toyota smart key using xtool tablet and AnyToyo?

Here is a video demo guide

https://youtu.be/JXGF5iQ34DY

 Thoughts on the AutoProPad Basic (APP)? Worth the $1K for an American/Asian daily programmer or is money better spent on a Autel IM508 with XP400Pro ?

First comes some unbiased reviews of both devices:

1. Autel can help get his foot in to European with other autel accessories. The APP basic has no European support.

2. I love my AutoPro Pad basic for certain vehicles especially ford. The ford 10 minute AKL bypass is a good feature. It does many Fords nicely (no 10 min wait), and many other cars. also no internet required for the APP. No internet to do dodges on the APP. Just wish there was a chevy 12 min bypass.

3. Km100 will give him similar functionality to Im508 without the ongoing subscription. Autel is weak on Honda but his topdon will cover that. the km100 would’ve been good as a first programmer as it can tackle most USA domestic vehicle.

4. I love Autel IM508. It can bypass the rolling code on new Toyota, AKL on a Hilux bladed through GBox and add key directly on Golf V without a working original, plus can generate Autel Prox and chips on the super chip in a pinch.

5.  The IM508 newest system update removed the need for hotspot connection to do all cars. My IM508 is my main programmer and it hasn’t let me down.

6. The Autel KM100 would be a good choice, being very similar in immo to the 508, but relatively cheap, and also good for doing autel universal fobs, which can contribute to a versatile inventory for cheap. The 608 will be able to do this, yes… But switching systems on it is a little clunky and tedious, so generating on the km100 and then programming on the 608 is faster and more convenient, so it’s still worth having around.

7. My first programmer was the APP full version. Bought the IM508 later. Each has its own benefits, but the 508 does more.

8. We have both. AutoPad can do new gms but I’d take im508 over it everyday of the week.

9. Then AutoProPad for it’s ease of use. And APP basic is non subscription, no tokens – no Internet so that will get scooped up while they still offer it.

10. I Started with a ProPad Basic ( affordable covers a good amount of vehicles ) but I picked up the skills very quick 2 months in I needed something more advanced then I purchased IM508 with XP400 Pro ( I got a good deal.)

11. Autel IM508 to start then upgrade it with the following items Gbox2, apb112, xp400 pro programmer. You get a kick ass set that maybe costs $1500. You will be able to 95% of keys.

In sum:

Use both, a great team. You’re going to need more than 1 programmer to fill gaps in coverage.

AuoPropad Pros:

No network

No subscription, no token

Fast

Will bypass new Fords with active alarm

Autel IM508 Pros:

large coverage than APP

Generate autel universal keys

bypass Toyota proximity pin code

slower than APP

AutoPropad works without network, it is faster and covers new Fords. Autel does more, it will bypass new Toyotas, it can generate autel universal keys but it is slower.

CGDI CG100X Programmer software update to V1.1.6.0.

V1.1.6.0 NEW

(2023.06.18)

1.Volkswagen MQB added “D70F3525+95320” meter adjustment models

2.Added 10 chips to Programmer.

3.Added 31 models to airbag.

4.Added 5 models to read-write.

The following chips are added for Programer.

 D70F3556

 D70F3550-5 lines

 D70F3551-5 lines

 D70F3552-5 lines

 D70F3553-5 lines

 D70F3554-5 lines

 D70F3555-5 lines

 D70F3556-5 lines

 D70F3557-5 lines

 D70F3559-5 lines

The following models are added for airbag.

 BAIC A512C00112(E00098305) R7F701A033

 Benz A166 900 20 3 95128

 Honda 77960-3K0-P810-M1 TC234-24F

 Honda 77960-T81-H220-M4 SPC56AP54

 BYD AUTO SCEA-3658100F(SEC30) Step One95640

 BYD AUTO SCEA-3658100F(SEC30) Step TwoSPC560P50L3

 MAXUS C00100169 95320(H320)

 MAXUS C00224537 95320(H320)

 Toyota 89170-42D40 R7F701A223

 Toyota 89170-F4560 R7F701A223

 FuDi 36581000K8AA SPC560P40L1

 FuDi 36581000K8AB SPC560P40L1

 Ford HP5T-14B321-AE R7F701A033

 Ford GV4T-14B321-DE 95640

 Ford JD8T-14B321-CE R7F701A033

 Ford MR3T-14B321-EA XC2336A-72F

 Ford FL1T-14B321-AC XC2361A-56F

 Redflag 3607115-E16 R7F7010093

 Geely 6600003684 643572100 XC2336A-72F

 Geely 1304285 635665100 XC2366B-40F

 Geely 641533200 95320(H320)

 Geely 641604100 95320(H320)

 Geely 645937000 95320(H320)

 Geely 11300244 R7F7010093

 JAC 5824901U7105 95160(H160)

 JAC 5824901V5002 R7F701A033

 JAC 5824901V5003 R7F701A033

 JMC MS1-14B056-AB 95320(H320)

 Hyundai 95910-DQ000 95512

 Chevrolet 13529157 SPC56AP54

 Citroen 9851129380 TC222-16F

The following models are added for dashboard read-write.

 Peugeot 9850073680 XC2336B-40F(read writer)

 Toyota 89170-50L53 R7F701A223(read writer)

 Cadillac 25832109 95160(read writer)

 Nissan 98820-6XJ0A TC222-16F(read writer)

 ChangAn 3658100-CD21 TC224-16F(read writer)

 Super ICOM Pro N3+ BMW diagnosic tool firmware can be updated online. Firmware upgrade procedure is the same as the original ICOM or high quality ICOM clones.

Preparation:

1.Open ITool Radar tool on desktop and check your current icom firmware version, it is v147

2. Free download latest icom firmware update files- bootimage and applicationimage (149 June 2023 version)

Firmware Update procedure:

1. Connect the Super ICOM Pro N3 to a computer with USB cable and power on ICOM with a 12V power adapter

2. Open the IE browser http://169.254.92.38:60080/, input user name: boot and password: NZY11502 (capital letters)

3. Click “update firmware” and you will see the version information of ICOM firmware

4. Select icom-bootimage bin file, set the image type to system and click “send the file”

5. When it says “write the image file to the flash”, click Yes and the Super ICOM light will turn red

6. When it prompts “the system image update was successful”, click “update firmware”

7. Select icom-applicationimage bin, set the image type to application, and click “send the file“, the file will take a few minutes

8. When it says “write the image file to the flash”, click Yes and the ICOM light will turn red again

9. Firmware update completed. Click “reboot”

10. Check current firmware version

Done.

https://www.obdii365.com/service/super-icom-pro-n3-firmware-update.html

Super ICOM Pro N3+ diagnostic tool supports USB and WiFi connection.

1. Connect N3+ with power supply or power by OBD from car

2. Connect N3+ with laptop with USB

3. Go to Network Connection, find out Realtek USB FE Family Controller network

4. Click on Properties-TCP/IPV4

 

Set 

IP address to 169.254.90.90, 

Subnet mask: 255.255.0.0, 

Preferred DNS: 169.254.255.1, click “OK”

 

Note: Each N3+ is bound to 1 PC. If change another N3+, need to reset IP.  After disconnecting the USB cable, the network icon will disappear, and you don’t need to set the IP address again when you use the N3+ after the computer is wired or wirelessly connected to the Internet.

 Car model: GMC Canyon 2011/2012

Canadian market car.

keydirect and UHS showed it is a Toy43R key with Subaru G chip/ But another side showed it is a ID49 chip.

I don’t know who is right. Which will help me in all keys lost situations.
There are in fact id49. I just cloned the chip using vvdi super chip.

Fastest option. Regular GM add a key doesn’t work for this car. Adding a key through programmer need to wait for 12 min.
Interesting is xhorse mini keytool can’t point out chip type but keydiy kd-x2 can tell it was 48.

Hope it helps.

 [June 2023] New version Honda HDS (Honda Diagnostic System) software version 3.105.012 download free, no password.

The i-HDS software is full of functions and features all while giving the user a layout somewhat familiar to the legacy HDS software. i-HDS supports vehicle models starting from the 2017 model year, for all Full Model Changes and new models.

Honda HDS 3.015.012 + iHDS +J2534 ECU Rewrite [2023.06] 

Download Link

Version

HDS 3.015.033

iHDS

J2534 Rewrite

Immobilizer Setup Tool

Language: English

Year/Release Date: 06.2023

Operating system: Windows 7, Windows 8, Windows 10

Support diagnostic interface: vxdiag vcx se series, vcx plus/vcx doip series, godiag j2534 etc

Honda HIM double board has not been tested.

i-HDS support J2534 passthru devices, Other devices are free to test by your side.

How to Install Honda HDS 3.105 software?

1. Install HDS setup

2. Install iHDS setup

3. Install J2534 Rewrite setup

4. Install ImmobilizerSetup Tool

5. Install device driver (install vx manager if using vxdiag scanners)

6. Run iHDS

 Question: I would like to know if Autel IM608, IM508 and km100 can program xhorse super chips?

Here is the clue.

It can program key but can’t generate. so you have to generate the key on xhorse tool.

They need to need generated as the proper chip type with a vvdi device first, then yes, you can program them with a different programmer. May work on some random id46 stuff as they are id46 as default.

I used super chip to successfully generate a dealer key for a 4th gen audi, but it has to be set to the correct transponder type first, in this case it was id8E, but of course it will vary from brand to brand. It’s a great idea to keep some oem transponders because it can fail.

CGDI CG100X software update to V1.1.5.0 on June 10th, 2023. 

V1.1.5.0 (2023.06.10)

1.Added Volvo lithium battery CAN repair internal test model to BCM.

2.Added 26 models to dashboard.

3.Added 2 models to airbag.

4.Added 9 models to read-write.

The following models are added for dashboard.

 Honda X-NV 2020- MB91F060BS

 DongFeng Jingyi X5 2020- 24C02

 DongFeng 360 2015- 9S12HA32

 DongFeng Fengguang 370 2016- 24C04(4G04)3plates and 2 needles

 DongFeng ruiqi EV 2019- 24C04

 FOTON Family  2017- 9S12XHZ512

 FOTON MP-X 2017- 24C08(ATMLHXXX08)

 FOTON Rowor little Diamond 2020- 24C16(4G16)

 FOTON Times lead5 2021- 24C08(ATMLHXXX08)

 FOTON Times lead6 2020- 24C08(ATMLHXXX08)

 FOTON XiangLing V3 2021- 24C16(4G16)

 guojin Automobile junbxing 2022- 24C16

 HEIBAO AUTO pantherQ3 2015- 24C04

 JAC I5 2021- 24C04

 JAC newKangling 2021- 24C04

 JAC Sunray 2019- 24C08(ATMLHXXX08)

 JMC shunda 2019- R5F10DSKL（small screen(Dashboard)s）

 LINCOLN DaLu 2017- 24C32

 Chery Tiggo 5X 2021- 24C16

 Hyundai Hongtu300 2020- 9S12XHY128

 YAMAHA MT-09 2019- 93C86

 FAW Jiefang Dragon VH 2018- 24C04

 FAW Jiefang Dragon VH 2020- 24C16

 Iveco DeYi 2016- 25040(25LC04)

 CNHTC WANGPAI W1 2018- 24C04(4G04)

 Zongshen Electric four wheel 9S12ZVH128

The following models are added for airbag.

Honda 77960-THA-H120-M2 R7F701A223

Toyota 89170-78270 R5F61797

The following models are added for dashboard read-write.

 BYD AUTO Qin EV 2022- 24C16(read write)

 Iveco Ousheng 2018- 25160(Dashboard)+95640(BCM)(read write)

 ChangAn EADO PLUS 2021- 24C16(read write)

 Toyota 89170-BZ390 95640(read write)

 FOTON J38580738 R7F701008(read write)

 FOTON J38580738(P1360010011A0) R7F701009(read write)

 Chrysler 68068 616AD 95128(read write)

 Roewe 10836975-01 R7F701009(read write)

 MAXUS C00215300 A2C18993700 R7F701009(read write)

 Both Autel MaxiPro MP808 and Xtool D8 are competitive bi-directional diagnostic scanners? Which one to choose? Check comparison below:

Table 1: Parameter Comparison 

Table 2: Model Year/System/Function Coverage 

Opel zafira 2001 add key by dump successfully with Autel MaxiIM KM100.

Had to read dump with a different tool and then made a key by dump using the km1oo.

That is a tms chip and data can be read with orange 5, xprog or vvdi prog.

You can upload file to km100 with Memory card or usb with OTG adapter.

The km100 didn’t give option to write back file he told me the chip can run the car. pcf7935 generate as ID40.

Car starts perfectly.

You can also read pin code and program via OBD with Autel im508.

Problem:

I try to install Autel MaxiIM IM608 apk, but it does not allow me. It gave error “blocked installation, for more security, your tablet blocks the installation of applications from unknown sources.”

Any solution?

Solution:

Go to Setting> Security & safe> unknow source click allow to install.

Question: I need to reset the airbag light in my Honda s2ki MY06. Any idea of what scanner I need for that? I don't really want to go to the dealership.

Answer:

You probably need Honda HDS software and an OBD-II dongle. I purchased those things late last year with success to re-calibrate the passenger airbag sensor in my 06. It was < $110.

You may be able to clear SRS codes with a normal OBD-II machine but I'm not sure. To access all of the Honda software BS in the 06+, you need Honda HDS. You're probably going to pay that much if you go to a Honda dealership to clear it anyways. 

HDS software installed and I ran the Seat Weight Sensor (SWS) Initialization process and everything is working as it came from the factory. SRS light on dash is off. Seat belt light comes on the dash if I sit in the pass. seat without buckling my OEM receptacle. Pass. Airbag "Off" light displays when I buckle the seatbelt and have no weight in the seat. "Off" light goes off once I sit in the seat. So happy it all worked.

Onto the Ballade rail. First of all, I'm stoked they make it and it's a good product that could use some fine tuning.

• Pros
  • First in, best dressed as the only product currently available for side mount seats with weight sensors
  • OEM Weight sensors work!
  • OEM sliders are smooth
  • Fits great. Idk if it's Pole Position specific but it bolted to the seats perfectly and lined up great once put in the car. Yes, it's OEM rails but they're 2 pieces and I was worried it may be difficult. Very easy and great fit.
  • You re-use your factory SRS box under the passenger seat. I later learned that you actually have to and even with the HDS, the documentation indicates you can't use one out of a different car. People who sell their OEM seats should know this.
  • Ballade did a great job getting the little SRS box/bracket as low as possible. I think it's lower than OEM and will allow a bucket to sit pretty low without interfering. It's positioned the best it can be.
  • For parts, pretty much same as my PCI rail. Ballade also includes nylon washers/spacers for the seat's side mount to protect it from the metal rails.
• Cons
  • Seat belt receptacle bracket on trans tunnel side is not located where it should be. It is located forwards of the harness holes in the seat. It should be back further for ideal safety. I'm not a safety engineer or knowledgeable enough to comment on how good/bad this is. It looks and feels fine in the car and I think it works but it's not ideal. I think this may be because the passenger trans tunnel sticks out further as it goes back. I'm not sure there would be enough room for a belt mount properly far back.
  • Rails could use some finishing. Ballade removes some rivets from the OEM rails to bolt on their own side brackets. That space left some bare metal. I shared feedback with Ballade and they claimed that's how it is from the factory. That is likely true but I did take mine apart and sand/paint them.
  • I had to drill a hole in my passenger seat belt receptacle mount to allow for mounting the slider's cable. I'm not sure if this is specific to mine or if it is generally an oversight of the product. The back story is that my rails did not initially ship with the seat belt receptacle mount on the trans tunnel side. I emailed Ballade and they had one shipped out to me quickly. Maybe when they do assembly, they typically drill it themselves. Not sure, but I had to do it myself.

The finishing stuff is not a huge deal but it is an expensive product that I think could be better refined. The seat belt receptacle mount is really the only part that has not been easily remedied. I'm not sure if that's oversight or if it's not possible because of the shape of the trans tunnel.

It works! Paying for HDS software + a HIM cable was probably cheaper ($110) than going to a dealer. I also am not confident I could go to a dealer and demand they run the SWS initialization without them doing their own assessment.

 Vapon VP996 key programmer released new software update on June 5h, 2023-adding Ford 2020 onwards key programming by OBD.

Vapon VP996 KEY PROGRAMMER FORD SOFTWARE UPDATE

Supports both add key and all keys lost.

June 5th, 2023.