Program Dodge RAM key with Xtool X100 Pad on Bench

Test:  xtool x100 pad bench programming Dodge RAM immobilizer function
Result: Success !

Disclaimer:
The test was carried out by Mexican expert. You are at your risk.

Instructions:
set up bench connection

connect module with VCI module and x100 pad, connect another end to key lock EIS (with key inserted) and power supply

In X100 pad, select Immobilizer->Chrysler->Immobiliser/Fobik (WCM)->Auto detect
Auto detect Type 4

Select Read security code

Read pin code success

Then choose to program new key/old key and follow xtool x-100 pad prompts until success.
Done.

http://www.key-programmer.org/2019/08/14/program-dodge-ram-key-with-xtool-x100-pad-on-bench/