Overblog Suivre ce blog
Editer l'article Administration Créer mon blog

OBD2 Tools

OBD2 Tools

OBD2 diagnostic tools & software technical service


BMW ICOM A2 FW V1.40 download and update

Publié par JTAC sur 7 Avril 2016, 23:30pm

Catégories : #car diagnostic tool

BMW ICOM A2,ICOM A China Clone diagnostic & programming system firmware is able to update to V1.40.

 

Current SYSTEM IMAGE version: 01.25.02 Current APPLICATION IMAGE version: 01.40.05

 

Free download BMW ICOM V1.40 firmware update file

https://mega.nz/#!X14TxZYY!6zrJ6og9gR5u-CcGbGtWSpHBCknjhl-LElommEgYSK0

The upgrade files and steps apply to: The following upgrade guide applies to both perfect vesion ICOM A2 and common version ICOM A1 A2. Obd365.com identify them via item NO. Perfect version ICOM A: item NO SP168-BA and SP168-BO Common version ICOM A1, A2: item NO SP168-C, SP168-B, SP168 and SP168-D

 

How to update BMW ICOM firmware to V1.40?

 

1.Download BMW ICOM V1.40 firmware update file

2. Please connect BMW ICOM A2 with computer using internet cable, power ICOM by 12V power adapter or from 1x DLC

3. Unzip ICOM FW v1.40 upgrade files.

4. Open IE Internet Explorer, enter address http://169.254.33.45:60080/ if you update Perfect version BMW ICOM, log in with

username: root

password: NZY1150263 PS: to upgrade common version ICOM A2 A1, browse http://169.254.92.38:60080/ and the next steps are the same.

6. Click “Update Firmware”, you will see ICOM firmware version information.

 

7. Click “Browse” to select file “ICOM-BootImage-01-25-02.bin”, set image type as “SYSTEM”, click “Send the file”.

8. When it pops up “Write the image file to the flash?”, click “Yes”, then ICOM indicator light will turn red.

9. When it pops up “The SYSTEM IMAGE update was successful”, click “Update Firmware”.

10. Choose “ICOM-ApplicationImage-01-40-05.bin”, set image type as “APPLICATION”, click “Send the file”, it will spend several minutes since the file is a little bit large.

11. When it pops up “Write the image file to the flash?” click “Yes”, then the ICOM indicator light will turn red for the second times.

12. When it finish upgrading, click “reboot”.

13. Click “Home” – “Update Firmware”, you will find ICOM A2 firmware update to the newest version: Current SYSTEM IMAGE version: 01.25.02 Current APPLICATION IMAGE version: 01.40.05

Additional Note: Please be sure your computer is to obtain IP address automatically.

http://blog.obdii365.com/2016/04/08/free-download-bmw-icom-firmware-v1-40/

Pour être informé des derniers articles, inscrivez vous :

Commenter cet article

Archives

Nous sommes sociaux !

Articles récents