Can I Generate Xhorse Super Chip with Autel KM100?
Q: I bought an Autel KM100 I’m trying to generate a chip I tested it with a xhorse vvdi super chip xt27a but it doesn’t work. Does anyone know what type of Chip is appropriate to be able to generate?
Answer:
Autel will not generate Xhorse chips or KEYDY, Autel must have its own chips or Autel remotes.
In the same way, Xhorse does not generate Keydy chips or vice versa.
Autel only generates AUTEL universal remotes.
How to Activate CG FC200 Again if License Expires?
How to activate CG FC200 software if software update subscription license expires?
If software license expires, users cannot activate it online.
Follow steps below to activate FC200 software.
Open online store icon, press this icon several times.
Then exit and run FC200 software again.
If says network abnormal, change to a more stable network connection.
The software has been activated again.
https://www.obdii365.com/service/activate-cf-fc200-if-license-expires.html
Nissan Navara D40 Pinout to Digiprog3
This helps if you need to correct mileage on a Nissan d40 navara.
Device to use:digiprog3 mileage programmer
Plug: 48
Solder the colored cables of Plug 48 to the suitable points
Nissan Navara HCS12
Connect DigiProg to separate electricity supply
Connect DigiProg 3 with the plug
Follow the instructions of the DigiProg
Choose program: PKW/LKW—Nissan-Navara-HCS12
Mini VCI Techstream V12 Register Toyota Tundra 2016 New Key
How to use Mini VCI Toyota Techstream V12 software to program a new key for Toyota Tundra 2016.
Procedures:
Connect MINI VCI cable to Toyota Tundra obd port,then run Techstream software
And click “Connect to Vehicle” button at right side menu
Confirm the vehicle information and press Next
After then click “Immobiliser”
Click “Utility”
Then select desired utility “Key Registration”option and press Next button.
Once you get here just follow the instructions and you gonna program the key.
Autel IM608Pro Sprinter 2002 Immo Box Chip Answer Error
Problem:
I have chip “answer error” on immobox temic sprinter 2002 with autel im608 pro, it is not the same photo in autel and vvdi prog, that of vvdi prog corresponds well to reality.
Which pins correspond to Pta0, ptc0 on apb108 cable?
vvdi prog 2002-2005 Benz Sprinter Immo Box pinout
Solution:
VPP2 is missing in your wiring. this is wrong of the capacitor itself
Or use vvdi prog easy job.
How to Tell Different Quality KT200 Boards?
There are 2 different quality KT200/KTM200 ecu programmer boards. And they are slightly different. One has a crossover board stuck to the back of the board and the other one does not. Looks like there have been revisions between them. The newest one was better quality soldering but looks like 2 chips have been hand soldered on and jumpers set differently.
One with cross overboard in the back is of very poor quality. One without cross-over board is a revision and is of better quality.
Good quality one
without crossover on back. Better soldering also.
Low quality with crossover
The poor quality kt200 won’t even i.d certain modules. Sometimes the toolboot option is useless as it won’t work at all.
Where do you recommend to buy a well made kt200?
Always buy from an authorized dealer. Don’t look cheap.
Obdii365.com have KT200 full and basic version with high-quality boards.
It can do a full backup of edc15 (flash+eeprom) by pinout. No need to open and boot mode which is a rare feature. It has some functions that even my genuine kess3 and Autotuner doesnt.
How to Change Hyundai Elantra 93C66 Mileage with iProg
Q: how can I do correction mileage for a 2011 Hyundai Elantra. can someone help me how I can make a mileage correction for a 2011 Hyundai Elantra?
All tools can do this 93c66 eeprom. upa, iprog, xprog, digiprog 3 etc.
Locate chip 93c66 or find a clip adapter from ebay
iprog do this fine and fast
How to Flash Autel MaxiIM KM100 via TF card?
One of our customers’ Autel MaxiIM KM100 device automatically restarts every 5-10 minutes, in this case he will need a firmware reflash.
Free Download Autel KM100 flash files
Installation instructions are mentioned, along with the boot files.
Preparation:
- One TF card (larger than 4G, please backup all personal files)
- One card reader.
- Windows computer (make sure the windows computer USB port has write permission.)
- “update.img” file (included in the flash files).
- “SDDiskTool” (included in the flash files)
- An Autel KM100 which needs to be flashed.
Step 1: Install flash file
- Copy “update.img” to Windows computer. Insert the TF card to card reader and plug the card read to computer USB port.
- Decompress the “SDDiskTool_v1.61.zip”to computer, will see the “SDDiskTool_v1.61”folder.
- Run “SD_Firmware_Tool.exe” program in “SDDiskTool_v1.61” like the following screenshot:
- Select removable disk. The inserted TF card will be selected automatically in normal case, but if more than 1 removable disk inserted in the computer, then need to select the TF card manually or remove another removable disk.
- Tick firmware upgrade.
- Click “select firmware” and select the “update.img” file.
- Click “Start to crate” and select “OK” in the pop-up warning window. (The TF card will be formatted in this step, please make sure personal files backed up already)
- It may take 7 min to finish the step. It will show successful window and please click “OK”
Step 2: Copy keepcar file (Optional)
If do not want to reset the Autel KM100 to factory default (Means will keep the history diagnostic files and photos), please copy the “keepcar.txt”to TF card root menu. Otherwise, please delete the “keepcar.txt”.
Step 3: Flash the KM100 (Please make sure the electricity is greater than 30%)
Insert the TF card to the KM100 which need to be flashed. Long press the power button to reboot the KM100, it will go to flash process automatically. And can take out the TF card once the screen shows successful.
Step 4: Clean up the system
Reboot the KM100 and go to System settings—system—reset—Factory data reset (DO NOT tip the erase SD card)—reset the device and the device will reboot automatically.
Done.
If still not working after flash firmware, need to send back device for repair.
OBDSTAR Failed to Add Renault Duster 2021 Key?
Question: I am trying to add key Renault Duster 2021 with OBDSTAR x300 pro4. It shows the number of keys, but does not enter programming. ANy idea?
Solution:
OBDSTAR says the function not supported.
Duster over 2019 obdstar gonna erase all keys, be careful and you can’t program any key.
Autel can’t do too, only when you have pin. Use xtool or AVDI for these vehicles, obdstar can’t do it.
How to Solve ECU Bench Tool “S1 S2 Pinout Error”?
Problem:
The ecu bench tool device has stopped communicating with the ECU. S1 error s2 pinout error. edc17 doesn’t connect either. I connect it well.
Solution:
Make sure the driver has been installed and the wiring connection is correct.
Don’t connect according to the color of the cables, follow the name marked on the cables.
Hold the Reset button to reset the device. Hold it till lights flash. And restart software.
If not working, download/ install both software and try again.
Download EBTSetup
ECU Bench Tool AMT Offline Software Download
Don’t run software or firmware online updates, otherwise, we are not responsible for the damage.
2013 Dodge RAM 1500 Key Not Working After Programming?
Here comes the problem:
I added a smart key ( after market) with autel im608 in my boss truck 2013 Dodge ram 1500 and it did work for 4 days. Today I added a new one ( also after market) and it worked for 3 hours. Scan systems and show the next code B1A0B-00… any help would be greatly appreciated.
Solution:
Your problem is the key. It happened to me a couple of times already with unlocked and chinese keys.
This happens VERY often when using aftermarket or Universal keys. They often never lock and very often fail.
B1AOB Faulty Totally Integrated Power Module (TIPM) or The auto market key is defective, you should buy good companies like Xhorse or original.
You can use one from keydiy or XHORSE they work fine.
Just use a xhorse key will go straight in. But better use Oem and you can’t have any keys near when your programming the key.
That’s a very common problem on that model, 2013 have an issue about RFH module, every time you tried key lock and then after some starting process it will unlock, you can program a Xhorse key and it never unlock it again or you can update the RFH on Witech 2.0 this should fix the problem.
How to Transfer Autel Ownership to Another?
How do you transfer the ownership if you bought a used Autel diagnostic scanner? Also what else is needed to purchase updates?
Solution:
Only an official Autel distributor can do it.
Contact obdii365.com customer service
Send us
old ID: xxxx@gmail.com
New ID: xxxx@gmail.com
Device Serial number: V09G7010xxxx
Then Autel technician will transfer over for you.
They will remove the original owner from his balance on the Autel website.
After that you can register it on your account with the serial. Very easy and forward.
If you need to change your registered Autel ID, you do the same above.
When buying a used Autel is it easy to transfer over subscription?
Yes, just contact us with the SN before your purchase and make sure it is for the correct region.
OBDSTAR Adds 2007 FIAT Punto ID46 Key Success
2007 FIAT Punto Key Programming (add ID46 key) successfully done by obdstar x300 dp plus.
Id46 key
433 MHz ASK Delphi remote
3 Buttons
Key blade: SIP22
Successfully recovered my pin code.
Precoding key to success.
Programming done successfully. Anti-start and remote centralization.
Menu path:
Immo->Europe->Punto->2006-2009-> Blade-> Delphi 93C86 (ID46)->Type 2(CAN)->Program Keys
CG FC200 V1.0.8.0 Adds MG1CS019 MD1CS012 MG1CP002
CG FC200 ECU programmer released new software 1.0.8.0 on Sep. 7th, 2022.
V1.0.8.0 Version NEW
(2022.09.07)
1.Added BMW 28A0, 101F fault code closing function
2.Added Bosch series engines: EDC17CP05 TC1797, EDC17C61, MED17.6.9, MG1CS019, MD1CS012, EDC17CV45, MG1CP002, ME17.U.6, MEV17.4.2 TC1766, MEV17.4.2 TC1767
3.New Bosch platform mode engines: ME17.8.8, MED17 and MED17.8.10
4.New Bosch boot mode engines: ME7.7.0, M7.9.8, MEG17.9.2, MEG17.9.21
5.Fix some bugs and optimize software performance
6.Add service renewal function
Free download CG FC200 V1.0.8.0 software
https://www.obdcg.com/Download/FC200_Installer_Latest%20Version.exe