Problem:

I need to add a new key to Renault Kadjar 2016 smart card with NCF29A1M transponder by OBDSTAR X300 DP Plus.
Read dflash ok
Make dealer key ok
Add key failed!
Failed to read pin.
Customer card works.
Wondering if following below instructions is safe.
If I will use AKL option and non pin will be correct the customer card will not work. Am I right?

Solution:

Kadjar does not work through the Add key menu, it is done through AKL (all keys lost).

You always have to go through all keys lost and program original key after you read data then you can code original and new key second time.
This is process
Read flash
Save flash
All keys lost
program keys
Then Pre code new key
Program keys
Job done.

Always use battery support for read dflash and keep internet connection stable.

 VAG ODIS-S service software V11 downloaded for free.

ODIS V11 software download

Password: 8888

Software version: ODIS V11+ PostSetup

Operating system: Win7, Win10

Language: English, German, Spanish, French and Korean

Supported car brands: Audi, Skoda, FAW-Volkswagen, Volkswagen, Shanghai Volkswagen, Volkswagen Commercial, Bugatti, Lamborghini, SEAT, MAN, Bentley

Compatible device: VNCI 6154A

Free to test it with svci 6154a, vas 6154a etc by your side.

NOTE: This ODIS v11 does not work with vxdiag vcx se 6154 because it uses different driver.

VNCI 6154a vs VAS 6154a vs other 6154a 

What’s new in VNCI 6154A?

• Work with original driver, Don’t need driver manager.
• Supports DoIP & CAN FD protocol
• With base station/hotspot mode switching button.
• Free license until 2030 year

 This is a 2020 Chevrolet Silverado with blade key. Here you can add key but the guy said that he wants to erase all the keys, so we are gonna go to all keys lost procedure.

You can add key even if you don’t have a working key on chevy, Adding a key doesn’t delete current keys programmed to the vehicle.

** NOTE:

1.Make sure battery fully charged, this is highly recommended, if battery isn’t fully charged there is a possibility that vehicle won’t start.

2.If it is smart proximity, IM608 won’t calculate security code directly. This is blade key, so it will calculate pin.

How to Calculate GM 24-Digit Security Code by Autel IM508 IM608 Team?

Connect Autel IM608 with USB and enable WiFi connection

Select GM->Automoatic selection

Confirm vehicle information

Select Blade key

Do a Immo status scan

Turn on ignition switch
Select All keys lost

Follow 3 steps to program key

Step 1: Read PIN

This function requires network connection

Read 4-digit pin successfully.

Step 2: Clear DTC
Step 3: Learn key

Learn key requires 4-digit pin.

Follow IM608 promts to turn ignition on, open/close driver door until key learning completed.

Mr. Ben and Tyler were going to compare notes on their experiences with the Autel Maxisys Ultra/MS919/MS909 platform. Maybe you're considering buying one? Maybe you already own one and hate it? Maybe you think it's the best thing since sliced bread. Let's hear it!

Easy guide to read ISN code from MINI Cooper MEV17.2.2 Engine ECU using CGDI Prog BMW key programmer.

Run CGDI BMW software, Select BMW ISN Read Write

Select engine ECU MV1722 and check wiring diagram

Connect DME with CGDI BMW followed the wiring diagram

Read DME ISN

Read ISN success

 Can I add autel ikey to Jaguar F-Pace 2017 or newer by obd? It’s safe?

Working experience:

1).

Just tried cloning Jaguar 2020 by iM508 + Autel smart key.

Only remote work, cannot start the car.

Autel accept only Autel key and nothing else. I have XM38 JLR key but cannot test with im508. Key is new style.

2).

Autel keys don’t work on jaguar, I already tried and it only unlocks the car but the car won’t turn on, if the alarm is active you won’t get communication on obd, so you need to add the key through kvm.

Autel is good a good choice for Jaguar.

Lonsdor released both new and old types of JLR keys (ID changeable)

Lonsdor old type JLR key (2015-2018)

Londsor new type JLR key (2018-2021)

 Key added on Peugeot 3008 of 2019.

CLE AES 4A freehand
Lame : HCA
Pin code recovery: OK
(in 7 times, on, Off)
Key programming: Ok with obdstar x300 dp plus.
Location to place the key is on the left side of the wheel.
Start, remote centralization and hand free: Ok

Pin code recovery, with the client’s freehand key, by putting the contact 7 times, on and off.

Peugeot 3008 2021 4A AES Keyless go All key lost Done by OBDSTAR

Question: I see there is “Switch Activation Function” in obdstar x300 dp plus, Can you give me a list of which module can be activated?

Answer:

Instrument Cluster Activation is a bonus feature of OBDSTAR X300 DP plus/key master DP.

Switch activation function

(Today many instruments or audio of vehicles activate secondary power supply to go into power-on status by relevant module CAN communication on the vehicle, but sometimes an instrument or an audio is separated from vehicle CANBUS network, causing startup failure when it needs to be repaired by an auto technician. This function can simulate CAN communication to activate secondary power supply, so the instrument or the audio enters into power-on status. In this way, it not only can test and verify the instrument or the audio, but also save an enormous cost for an auto technician to purchase a large number of startup platforms of various vehicles and wiring harnesses!)

Muti-functional Jumper is required when performing cluster activation function.

Here comes the Cluster Activation car list of x300 dp plus. 

Audi

Mercedes

Jaguar

Dodge

Ford

Lamborghini 

Land rover

Porsche

VW

Volvo

Audi A4L, A6L, A8L, Q7 and TT

Mercedes Benz W221 and W204

Dodge Jcuv

Ford Kuga, Mondeo

Jaguar XJ

Lamborghini LP750

Land rover Range Rover, Evoque

Porsche Macan

OBDSTAR has a standalone instrument cluster activation device- MT502 which has much more coverage than X300 DP Plus. 

Check coverage here 

https://www.obdii365.com/wholesale/obdstar-mt501-bench-test-paltform.html

 I got a Toyota Roomy van with one key, the second either remained in Japan.

I’ve been planning to fix this for a long time. And I ordered a key and a mini vci Toyota techstream cable.

The key must be new or blank. To register the key you need to prepare a laptop with Techstream installed, a mini VCI cable, an old key and a new key.
I registered with Techstream version 16.20.023.

Choosing Roomy

Select the Body module in the list of units

Select Utility on the left

Select Add key registration

 

The program offers to open one of the car doors and turn off the car.

Then the program will ask you to bring the old key to the start button – if the central lock clicks ok, then the new key. These operations take 30 seconds. – you need to have the keys in direct access. )

Everything, the new key is registered, it remains only to cut a new physical key on a blank.

 Problem:

I need to read Volvo KVM data with Lonsdor K518ISE K-prog2 programmer. But it days run App failed. Adapter module is not bound. Any solution?

Solution:

You have to combine kprog2 adapter with K518ISE in order to read immo data.

Follow instruction here to bind kprog 2 with k518.

How to connect or bind KProg with Lonsdor K518:

If it’s the first time to use the KProg adapter, you need to bind it with K518ISE.

Connect kprog

Go to the K518ISE home page

Choose “Settings -> Bind adapter”

And follow the direction to finish binding

You have to know:

One K518ISE host can bind up to 5 adapters

And the bound adapter can not be bound to other K518ISE hosts.

Once bound, no need to bind again.

Here is the steps on how to use iProg programmer to modify mileage for Chevrolet Captiva 2020 with S6J324CKSP chip.

Procedure:

Connect iProg programmer to Chevrolet Captiva by OBD2

Then run iProg software,select “Chevrolet_Captiva_2020_(S6J324CKSP)”_OBD2.ipp

Click “Read EEPROM”,it will show current mileage value

Then input the new value you want.

  Click “Change KM”,then click “Write KM only”

Wait processing finish,the new value you want will show on dashboard screen.

If your Toyota or Lexus car is bellow 2016 year, Techstream V11 is enough.

Here we provide mini vci techstream v11 with keygen and set up on vmware. 

I stayed up all night thinking about how to make this easy on everyone so ended up coming with an idea of virtual machine.

What is a virtual machine?

A virtual machine is a computer file, typically called an image, that behaves like an actual computer. In other words, creating a computer within a computer. It runs in a window, much like any other program, giving the end user the same experience on a virtual machine as they would have on the host operating system itself.

So I found VMWARE as our software to create the virtual machine and later on that night I was able to find windows XP 32bit and tried installing xp in the vmware and turns out to work great, so with that being said I combined AGAIN all the files including vmware, winxp, techstream and its drivers as well

I installed winxp on vmware turned out very well to an extent that when I connected the mvci cable it auto installed the drivers I did not even have to manually install the drivers not sure how it happen it could have happened because at that time my winxp virtual machine had already access to the internet. And might have downloaded the drivers itself.

Below is the link of the file 1.24gb

as usual please dont forget to block vmware to access the internet using windows firewall block these two files both inbound and outbound rules
ProgramFiles(x86)\VMware\VMware Workstation\vmware.exe
ProgramFiles(x86)\VMware\VMware Workstation\vmUpdateLauncher.exe

also when winxp is installed on vmware, u can easily drag files from your host computer to winxp (all them techstream files)

https://mega.nz/#!4tkASS6L!LJWshecwOUNIB8CxQ3_M4O3E7f4BsrGSh-Boe3EIihM

file includes:

Techstream v11 (good for the cars/trucks manufactured upto 08/2016)

Techstream keygen

VMware

VMware keygen (I have extracted about 10 keys in notepad)

Windows xp sp3 iso

32bit and 64-bit drivers for MVCI cable

software for checking your cable version.

Please do check the instruction included in the download and installation will be a breeze I have also included screenshot of vmmachine to make it configured right so that usb devices are detected these pictures will make more sense of what I am trying to say

Question:

How can I make a file virgin on toyota using autel im508 and xp400?

To make a file virgin on a Toyota using Autel IM508 and XP400, follow the steps below:
Connect the Autel IM508 to the OBD2 port of the Toyota vehicle.
Turn on the Autel IM508 and select “IMMO” from the main menu.
Select “Toyota” from the list of available vehicle makes.
Select “Keyless System (CAN)” or “Smart System (CAN)” depending on the type of system in the vehicle.
Select “Erase Key” or “Reset Immobilizer” from the list of available options.
Connect the XP400 to the Autel IM508 via the USB cable.
Insert the key into the XP400 key programmer and select “Read Key” to read the key information.
Select “Erase Key” or “Reset Immobilizer” on the Autel IM508 and follow the on-screen instructions to complete the process.
Note: Before attempting to make a file virgin on a Toyota using Autel IM508 and XP400, make sure you have a good understanding of the process and have the necessary training and experience. Improper use of these tools can cause damage to the vehicle’s immobilizer system.