cg fc200
CG FC200 Adds Continental PCR2.1 SDI7 DPS6 ECUs
Q: I got the CG FC200 programmer software updated to latest V1.1.3.0, but Continental TC17 and bench MPC5xx license are missing. How to activate it?
A: The authorization will be activated uniformly in two days. License are free, but need to use an extra adapter.
FC200 bench MPC5xx adapter
FC200 software V1.1.3.0 update feature
May 24th, 2023
1. New Function
(A) VAG TCU Mileage Repair
DQ200
DQ250
VL381
DL382
(B) Immo Off
EDC17C53
EDC17C63 / EDC17C81
2.New ECUs
(A) Continental ECU
PCR2.1
SDI7
DPS6
(B) BOSCH ECU (Add BOSCH MPC5xx platform mode ECU)
ME9.0
MED9.1
MED9.5
MED9.5.10
EDC16C2
EDC16C8
EDC16CP31
EDC16CP35
(C) KEFICO ECU
CPEGD2.20.x
(D) DELPHI ECU (Add Mercedes Benz CRD2. x MPC556x engine platform mode)
CRD2.x
3. Checksum correction
(A) DELPHI ECU
TC17 series chip
(B) BOSCH ECU
ME7.4.5
(C) GM TCU
6T30
6T80
6L80
CG FC200 1.1.2.0 Adds GM E37, E39A, E78, E80 and E83 ECUs
CG FC200 ecu programmer released new software 1.1.2.0 on April 6th, 2023.
Update Content:
1. Fix the problem of engine recognition and read/write failure in GM E38, E67 and E39
2. Add GM E37, E39A, E78, E80 and E83 engine platform mode
3. GM E38, E67, E39 and E39A engines add Ext FLASH verification function
4. Add the "time repair" function of "Lovol harvester" to support the EDC17CV53 engine of Lovol harvester
5. Benz VGS-FDCT, VGS2-FDCT and VGS-FCVT gearbox add PFLASH verification function
6. Volkswagen DL501 Gen2 and DL382 transmissions add PFLASH verification function
7. Add BOSCH ST10 engine: M7.4.4, ME7.3.2, ME7.4.4
8. Fix the connection failure of DELPHI CRD3.10, CRD3.xx TC1797 and other engine platform modes
CG FC200 Adds GM AcDelco 6T and 6L Gearbox TCUs
CG FC200 ECU/TCU programmer released new software V1.1.1.0 on Feb. 1st, 2023.
V1.1.1.0 Registered Version NEW
(2023.02.01)
1.Setup interface adds-Server Selection function
2.Optimize the device activation interface (add the "Activate" prompt)
3.Repair the failure problem of the Bosch query abroad
4.Added GM AcDelco transmission platform mode: GM 6T30/35/40/45/50, GM 6T70/75/80, GM 6L45/50/80/90
5.New BOOT mode of BOSCH ST10 engine: ME7.1.1, ME7.5.10, ME7.8.2, and MED 7.6.2
6.New BOSCH TC17 engine platform mode: ME17 TC1728 (China)
7.New BOOT mode of KEFICO TC17 engine: CPGDSH2.2x.x, CPGDSH1.26.1, KME 1.9.3.1
8.New BOSCH VAG gearbox PFLASH calibration function: DQ200 TC1784, DQ200 TC1766, DQ250 TC1766, DL501Gen1 TC1766, VL381 TC1766
9.Newly modified VIN model: MED 17.8.3
CG FC200 V1.1.0.0 Adds Mercedes CRD3.x Series in Boot
CG FC200 Programmer released new update on Dec. 13th, 2022. NEW UPDATE!!! New Engine and Gearbox ECUs added to the list.
V1.1.0.0 Registered Version NEW
(2022.12.13)
1.Added DELPHI platform and BOOT engine: CRD3.10, CRD3.E1, CRD3.F1, CRD3E.1, CRD3P.B0, CRD3P.C0, CRD3P.D1, CRD3P.G0, and CRD3xx
2.Added BOSCH BOOT engines: ME7.5.20, M7.9.5, ME7.9.51, and ME7.9.52
3.Add PFLASH check function for MG1C, MD1C SPC5777 and TC298TP engines of BOSCH
4.Added password reading function in the platform mode of GM engine E39
5.Optimize the PFLASH verification algorithm of BOECH's TC17 series engines
6.Added BOSCH platform engine: EDC17CV53
7.Fix some bugs and optimize software performance
CG FC200 1.0.9.0 Update GM ACDelco and ZF 9HP
CG FC200 ECU programmer released new software version 1.0.9.0 on Oct. 19th 2022.
CG FC200 Software V1.0.9.0 NEW
(2022.10.19)
1. Added GM ACDelco ECU: E38, E39, E67
- ACDelco E38:read and write EEPROM & FLASH
- ACDelco E39:read and write FLASH, read password
- ACDelco E67:read and write EEPROM & FLASH
(Note: please update the authorization for the first time, and then restart the software)
2.New gearbox computer: ZF_9HP
Read and write EEPROM and Flash
Models involved: Acura, Chrysler, Citroen, DS, Peugeot, Dodge, Fiat, Honda, Jaguar, Jeep, Land Rover
3. Added Bosch engine (platform mode): MD1CS018, MG1CS032, MG1CS026, MG1CA920, MG1CA007, MG1CA811
4. Added engine with modified VIN function: EDC17C42, EDC17CP27, MED17.8.2, MEVD17.2.7
5. Added the American version of BMW 28A0 and 101F fault code shutdown function
6. Fix the abnormal display of software service time
7. Fix some bugs and optimize software performance
How to Activate CG FC200 Again if License Expires?
How to activate CG FC200 software if software update subscription license expires?
If software license expires, users cannot activate it online.
Follow steps below to activate FC200 software.
Open online store icon, press this icon several times.
Then exit and run FC200 software again.
If says network abnormal, change to a more stable network connection.
The software has been activated again.
https://www.obdii365.com/service/activate-cf-fc200-if-license-expires.html
CG FC200 V1.0.8.0 Adds MG1CS019 MD1CS012 MG1CP002
CG FC200 ECU programmer released new software 1.0.8.0 on Sep. 7th, 2022.
V1.0.8.0 Version NEW
(2022.09.07)
1.Added BMW 28A0, 101F fault code closing function
2.Added Bosch series engines: EDC17CP05 TC1797, EDC17C61, MED17.6.9, MG1CS019, MD1CS012, EDC17CV45, MG1CP002, ME17.U.6, MEV17.4.2 TC1766, MEV17.4.2 TC1767
3.New Bosch platform mode engines: ME17.8.8, MED17 and MED17.8.10
4.New Bosch boot mode engines: ME7.7.0, M7.9.8, MEG17.9.2, MEG17.9.21
5.Fix some bugs and optimize software performance
6.Add service renewal function
Free download CG FC200 V1.0.8.0 software
https://www.obdcg.com/Download/FC200_Installer_Latest%20Version.exe
CG FC200 Programmer Success and Failure
Here comes the unbiased review of the new CG FC200 ecu programmer. What it did and failed.
'I am going to go through different features of the new CG FC200 I purchased recently. It doesn't have a lot of features but it's got a few useful features. There are things that I like and things that I don't like.
I'm not trying to knock any product but it's a useful unit. It could have been better thro.
It’s a brand new unit. That anything that comes out for the first time usually has room for improvement.
Let’s not jump the gun because they have already updated to another version already.
Cg is a very good company I’m not going to knock them.
Software is simple, clean and easy to use. They does not have many Japanese ECU information. Like Honda, it has a few models Accord, Civic, but they don't have a lot 2.0, 2.2 anything V6 engine.
We know it is mostly for bosch ECUs.
I hit one diagram on the Honda and it shows me the wiring diagram. I could identify modify all that good stuff. everything is there one diagram.
I want to show you guys a unique feature that i like.
You see this little tab right here next to the search. Hit that little tab and then it's going to pull up another screen here in your microsoft words.
You could see where you could read an obd, bench and boot all the cars on one side. You have the ECU's and they tell you whether you can read them in obd, bench or boot and functions read/writer dflash, pflash, password etc. It tells you the capability for that ecu.
Only thing is that's disappointing at this time for me is that only some bmw has obd. So with this unit you have to take the ecu or dme or whatever out of a car.
You go back down there, hit microsoft words and you're right back so you could look up the ecu number.
It comes right let's tap on and it comes right up here.
You know and everything is right there. You can look at the ecu number for the mini and Mitsubishi and everything you could do, read flash write the flash, all of that you know it tells you all this information here and everything us at your fingertip by just hitting that one little button.
What i have done so far:
did 17c50 and checksum did online...need wait for a 10seconds
read and write if isn and vin for N55 and N29 ECU were successful.
read isn all keys lost 2016 BMW 328I F30 N26
2015 Audi A3 1.8T TCU clone, reads fine, failed to write Pflash
yesterday did md1cs006 eeprom and flash
Read BMW MSV80 ISN and VIN (very fast, it has different pins which makes the bench connection much easier)
Pros:
Search ecu by bosch ecu number, car brand
it tell you method and function of that ecu
get a bunch of pins and each pins got its different size to fit on these pins
shows wiring diagram, you could zoom in and out
very fast to read bmw msd msv isn on bench
Cons
Mostly Bosch ECU and some siemens old ECUs
Only some bmw ecu can be done via obd.
Don’t have a lot of Japanese ECUs (siemens or denso ecus)
Worth buying FC200?
Depends on what is the main purpose of your buy. Could be useful for BMW ISN from Ecu or maybe for some Ecu cloning, but only some of them because most of MEDC17 needs adaption of OTP and password or immo transfer for successful cloning.
If there is checksum correction, this tool will be a very good tool. Let's wait for the feature updates.
CG FC200 Read BMW F30 N26 ISN Success
CG FC200 ecu programmer reads ISN for 2016 BMW 328I F30 N26 all keys lost easy in 2 minutes.
Everything comes up
Very fast, it was done in a minute.