OBD2 Diagnostic Tools

Can Autel IM608 Program Sprinter All Keys Lost via OBD?

5 Août 2022 , Rédigé par JTAC

Question: I am ready to do a Mercedes Sprinter all keys lost. I saw there is on vehicle option on Autel IM608. Can i do it via obd not removing the EIS?

Autel IM608 Program Sprinter All Keys Lost via OBD 1

Solution:

If you are in USA it’s a bench job. If you are in EU possible OBD.

There is difference between the fobik key to the flip key.

I have done all keys lost obd using Gbox2 obd on w906 sprinter fobik key.

Repost0

Generate and Program Hyundai i10 2022 Smart Key with Autel KM100

4 Août 2022 , Rédigé par JTAC Publié dans #Autel KM100

How to:Read pin code and add smart key to a Hyundai i10 2022 ID4A by Autel MaxiIM KM100 key programmer.

Step 1: Generate remote

Step 2: Read Pin Code

Step 3: Add key

Procedure:

Step 1: Generate remote

Insert Autel universal key into induction coil

Select Universal Key function->Hyundai-> Hyundai i10 Grand i10 2020-2022

Then generate remote key till completed

Autel KM100 Add Hyundai i10 ID4A 2022 Smart Key 1

Autel KM100 Add Hyundai i10 ID4A 2022 Smart Key 2

Autel KM100 Add Hyundai i10 ID4A 2022 Smart Key 3

Step 2: Read Pin Code

Go to IMMO Function

Select Honda-Manual section- Europe- i10(AC3)- smart key

Do a Immo status scan

Read PIN-> Read PIN Code (4A Smart Card)

Press Start button

Autel KM100 Read pin success

Autel KM100 Add Hyundai i10 ID4A 2022 Smart Key 4

Autel KM100 Add Hyundai i10 ID4A 2022 Smart Key 5

Autel KM100 Add Hyundai i10 ID4A 2022 Smart Key 6

Autel KM100 Add Hyundai i10 ID4A 2022 Smart Key 7

Autel KM100 Add Hyundai i10 ID4A 2022 Smart Key 8

Step 3: Add key

Select Add key (guides)

Initilize function
Verify PIN
Program smart key

Autel KM100 Add Hyundai i10 ID4A 2022 Smart Key 9

Autel KM100 Add Hyundai i10 ID4A 2022 Smart Key 10

Autel KM100 Add Hyundai i10 ID4A 2022 Smart Key 11

Autel KM100 Add Hyundai i10 ID4A 2022 Smart Key 12

Autel KM100 Add Hyundai i10 ID4A 2022 Smart Key 13

Autel KM100 Add Hyundai i10 ID4A 2022 Smart Key 14

Autel KM100 Add Hyundai i10 ID4A 2022 Smart Key 15

Autel KM100 Add Hyundai i10 ID4A 2022 Smart Key 16

Test both keys. Done.

How to Tell Fiat Marelli and Delphi Remote?

2 Août 2022 , Rédigé par JTAC

What is the difference between Fiat after-market remote? Looks no difference on the PCB.

Left: Marelli, Right Delphi

Marelli and Delphi are the 2 brand models, of FIAT brand BSI (intelligent service box).

Xxxxx25 is Marelli, xxxxxx2Y where Y is for letter its Delphi

The difference from delphi and Marelli is only the pin used for the push buttons (resistors allocations for buttons).

there is a difference, look closer. There are 2 types of remote, the difference is in an integrated circuit on the PCB: 8 pin IC for cars with Marelli BSI and 10 pin IC for cars with Delphi BSI, they are not interchangeable.

With this information, it should help you a lot.

Tips to program Fiat remote:

Chinese remotes incl. Keydiy and Xhorse keys are not good for Mareli Fiat. Best is to buy 2nd hand original, change PCF and enjoy fully working key without any issues. Or use silca key.

So use original/slica keys for Fiat Marelli type and Chinese key for Delphi system.

Pre-coding a Fiat/Alfa/Lancia remote it’s a thing since years, but you need the right tools to do it.
You have to read Immo data (and Pincode), and from that you can precode a simply PCF7936 only for start the car, or you can precode a remote key with PCF7946, if it’s not precoded or it’s not the right type of remote for that car, the remote will never works.

This Precoding can be done only with AVDI, Autel IM508/IM608, TMPro, SmartPRO, ZedFull, also OBDStar and Lonsdor are pretty good and other diagnostics of this level. No remote can be precoded with clone tools or low level diagnostic tools. These remotes can be reset and reused on another car only swapping the PCF7946 with a new virgin one.
You can also order the key from Dealer, in this case they will arrive already blade-cutted and also pre-coded for your car’s BSI, only need OBD learning.

Range Rover Sport 2007 CEM AKL by VVDI Prog and IM608

1 Août 2022 , Rédigé par JTAC Publié dans #autel im608

Done Range rover sport 2007 CEM all keys lost on bench using Xhorse Vvdi Prog and Autel IM608. The CEM is behind the glove box.

I tried with Autel whole job didn’t work I have to use vvdi prog. Autel fail to read then I read with vvdi pro and vvdi2 to program chip after car start then add new remote key by Obd.

Autel didn’t read CEM, read by vvdi prog and after you can use Autel/vvdi2 to load into it and make the key.

In my experience, Autel couldn’t do it. Read CEM, made key, and says ‘Chip Unlock Failed’ when writing back. Original key stopped working, thought user error so repaired the car and tried again on another but came to the same issue, Autel bricked the car when writing back.

Transfer a file from Vvdi to autel via email.

Car starting, you need to write back new file to CEM.

Range Rover 2007 CEM AKL with VVDI Prog and IM608 1

Range Rover 2007 CEM AKL with VVDI Prog and IM608 2

Range Rover 2007 CEM AKL with VVDI Prog and IM608 3

Range Rover 2007 CEM AKL with VVDI Prog and IM608 4

Autel IM608 Update BMW FRM XEQ384 3M25J XET512

1 Août 2022 , Rédigé par JTAC Publié dans #autel im608

Autel MaxiIM IM608/IM508 XP400 (Pro) released a mega update for the immobilizer and programming in July 2022.

W got new FRM that can be done on the BMW new EEPROMs
They have added 52 mcus and some more eeproms.

Immo Program V4.00

IMMO_ Immo Program Version number V4.00 Release date 2022/07/28
1. Adds FRM XEQ384 (3M25J) data recovery function for 13 BMW E chassis models.
2. Adds FRM XET512 data recovery function for 2 BMW F chassis models.
3. Adds read & write function for 65 types of EEPROM.
4. Adds read & write function for 52 types of MCU.
5. Adds read & write function for 11 IMMO modules for models including Geely Preface, Honda Acura and Jeep Renegade.
6. Adds read & write function for 13 types of instrument cluster for models including Volkswagen Passat, Fiat and Buick.
7. Adds read & write function for 8 types of airbag modules for models including BMW and Mercedes-Benz.
8. Adds read & write function for 15 other modules for models including Porsche and Ford.
g. Adds universal key generation function for 391 menus for models including BMW, Infiniti, Volkswagen and Porsche.
10. Adds FRM XEQ384 (3M25J) DFIash read & write function in other function modules for BMW F chassis models.

11. Adds description of Settings function in Chip read & write function module\
12. Optimize operating instructions for TC1796 ECM read & write.
13. Optimize prompts in case of abnormity of Write Key via Dump function
14. Optimize Audi ESL function and its schematic diagram
15. Optimize ECM read & write function for Kia

as well as other brand IMMO program updates, check update notice in IM608/IM508.

Autel IM508 IM608 Adds BMW FRM XEQ384 XET512

Autel IM508 IM608 Adds BMW FRM XEQ384 XET512 2