Autel IM608 Renault Clio 5 Unlock Failed Solution
Problem:
I tried to diagnose a Renault Clio V 2020 with autel im608, it failed me and shows 2 errors.
“Please contact your distributor to purchase the lockout service.”
“Unlocking failed
Error Message: The software service is requesting has not been purchased.”
Any solution?
Solution:
For Renault vehicle with gateway, you need to purchase the Renault gateway unlock authorization or use the Renault gateway adapter.
You can purchase Renault gateway unlock service from “OEM Authorization” function.
How to Unlock Renault Gateway ECU with Autel Diagnostic Tools
Autel does not have a dedicated adapter for Renault. You can use OBDSTAR green adapter or other gateway connectors.
OBDSTAR Adds Honda 2019- ID47 Proximity All Keys Lost via OBD
OBDSTAR released new Toyota/Lexus and Honda immobilizer software in Sep. 2022. These updates can be applied to obdstar x300 dp plus and x300 pro4.
Toyota Lexus IMMO V32.70
Toyota
Add 2018- 8A AA Proximity Add key and all keys lost free pin code
Wildlander, Avalon, Rav4, Crown Kluger HV, RAV4 HV
Lexus
Add 2018- 8A AA Proximity Add key and all keys lost free pin code
ES
RX
UX
Supported 8A-A9: 2018- Camry, Izoa, CHR, LS
Supported 4A: 2019- Corolla
Require OBDSTAR 4A CAN Direct Kit and Key SIM emulator.
OBDSTAR also adds 2019- ID47 Proximity all keys lost via OBD
Vezel
Avncier
Civic
Breeze
XR-V
Life
CR-V
VW-1
X-NV
CDX
Autel IM608 Program 2018 Dodge Ram 3500 Fobik Key
2018 dodge Ram 3500 fobik key done with Autel IM608 and 12+8 bypass cable. No Problem.
With Autel 12+8 cable you must remove all that hassle to get pin code. Then learn key.
there are several ways to bypass the Chrysler SGW and one of them is through the Star connector, It’s almost always easy to access and you don’t have to disassemble anything.
Does the star connector cable work with Autel IM608? Or is the 12+8 bypass cable the only way to do 2017+ Chrysler, Jeep and Dodge vehicles. I see a lot of folks say to just use the star connector cable and don’t mention it working with the IM608.
Yes, it works with IM608 and IM508.
Autel does not have Start connector cable for IM608 Pro, but you can use the one from the other equipment.
When the star connection is fully accessible right by the ebrake. That’s a 3 to 5 minute job with the star connector.
Or get the brute force style cables and never spend more then 5 minutes hooking up. It has the 2 can lines you connect to the star connector. I upgraded mine and soldered in a star connector plug in, now all I do is plug in and go, I suggest breaking the locking tab off, much easier to get it out and it doesn’t fall out.
OBDSTAR X300 DP Plus Adds Nissan Sentra Juke 2021- Proximity
OBDSTAR released new Nissan IMMO software V32.32 on Sep. 1st, 2022.
Add 2021- Proximity Add keys free pin code
Sentra (B18)
Juke
Sentra E-Power
R53
J12
This update can be applied to X300 DP Plus and X300 Pro4.
Require Nissan 16+32 gateway adapter
KT200 Software Update to 22.08.20
KTM200/ECUTuner/KT200 ECU programmer and chip tuning kit software update to V22.8.20 in Auguest 2022.
the newest V22.8.20 KT200 software fixes some function problems & bugs as follows.
1. Solved the problem that the mobile network cannot connect to the server.
2. Added the boot screen to solve the long-term unresponsiveness of the click software.
In the old version, the software bootup may take too long or the click software does not respond. We fixed this problem in the new version.
3. The virtual data read and write functions are fully optimized.
The new version of KT200 optimizes the virtual data read and write function. The models that support VR reading and writing can be viewed in the ECU List. We will keep updating the ECU support list to meet more of your need!
Obdii365.com shares KT200 22.8.20 08/2022 software download:
https://mega.nz/file/m6wUhByI#Nn-_1GUBrgIKqpm9WfuwN3nRZ7aKWZvFhoSv4qpAzYI
Disable anti-virus program before installing software.
Incl.
KT200 software
KT200 driver
KT200 user manual
KT200 frequently asked questions
Update Log
Compatible operating systems:
Windows 7
Windows 8/8.1
Windows 10
Windows 11 !
Minimum recommended requirements:
CPU > 2.5 GHz (Intel i5, i7)
RAM > 4GB
How to Install KT200 software?
https://www.obdii365.com/service/install-kt200-ecu-programmer-software.html