/image%2F1896381%2F20151209%2Fob_cb2b49_obd365-com.png)
Yanhua ACDP BMW FEM/BDC Mileage Reset Guide
Here is the instruction to reset BMW FEM/BDC mileage with Yanhua ACDP.
NOTE: Only resets mileage in BMW FEM/BDC system.
What’s required:
Yanhua mini acdp host
Module 2 interface board for FEM/BDC immo and mileage
Yanhua BMW FEM/BDC clip adapter
Procedure:
Remove and disassemble FEM/BDC module
Locate and clean eeprom chip 95128/95256
Connect FEM/BDC interface board and FEM clip adapter with FEM module and ACDP host
The new Yanhua FEM clip adapter is recommended, no easy to slip off
Go to BMW Programming BMW FEM/BDC-IMMO Mileage
Perform BMW FEM/BDC initial programming process
2 methods are provided to perform this process
Here we prefer method 1 Automatic ICP programming
Read Key FEM system information
The green indicator on the FEM interface board turns on
Detect VIN, mileage, key frequency and software info
Then it will auto check pin status connection
Once well connected, press OK to continue
Reading coding info.
Auto backup coding data
Downloading data and preprocessing FEM/BDC
This process will take about 20 minutes
Yanhua ACDP write coding data and save
Automatic ICP programming is completed.
Auto save new coding data.
Go back and select Reset Mileage
Make sure you finish BMW FEM/BDC initial programming process
Reset FEM/BDC mileage succeeded
Auto save new mileage data
Restore BMW FEM/BDC module.
https://www.obdii365.com/service/reset-bmw-fem-bdc-mileage-with-yanhua-mini-acdp.html
How to Convert Lonsdor Hyundai Kia 8A Smart Key Versions?
Lonsdor released Hyundai and Kia 8A smart key programming using PS6000B and PA7800B smart keys.
Here is the Hyundai Kia 8A smart keys supported vehicle list and shell.
Software and Frequency are convertible.
Supports P4 versions:
0000A3A3 / 000000D3 / 0000D3D3
0000B3B3 / 00002323 / 0000CECE
0000D0D0 / 0000D2D2 / 0000CDCD
Supported Models:
Chinese Hyundai/Kia
Sonata 9/15-17
Sonata 9 Hybrid/15-17
Beijing Hyundai 1X25/17-19
Kia K3/16-18
Beijing Hyundai IX25/-16 front
Beijing Hyundai 1X35/18+
Elantra leads 16-19
Global Hyundai/Kia
HYUNDAI Sonata 2015-2017
HYUNDAI Sonata Hybrid 2015-2017
HYUNDAI IX35 2018+
HYUNDAI Elantra 2016-2019
KIA K3 2016-2018
How to Program Hyundai Kia 8A Smart Key with Lonsdor K518?
Go to Special Functions-> Key Settings-> XD smart keys-> Smart key conversion
Convert PS6000B or PA7800B smart key to your original key version
Then go to the immobilizer menu, select corresponding models and program 8A smart key.
Autel IM608 Adds GM US 2020-2022 CAN FD Proximity
Big shout out to Autel MaxiIM IM608/IM508 tech support. It was super great to work with. MaxiIM new update GM CANFD 2020-2022 smart key programming. Autel CAN FD adapter is required.
Cadillac (US):
Sierra (2021) with smart key (CANFD)
(2021 -2022) with smart key (CANFD)
Chevrolet (US): Blazer with smart key, Camaro with smart key, Colorado with blade key, Equinox with smart key, Express with blade key, Malibu with smart key, Silverado 1500 with blade/smart key, Silverado 2500 with blade key (L83/LC8 engine), Silverado 3500 with blade/smart key. Spark with blade/smart key, Trailblazer with blade/smart key, Traverse with smart key and Trax with smart key. etc
How to Solve KT200 EDC17 OTP Protected Not Write
Some people have problems reading EDC17 with OTP protected. For example Corsa D EDC17C18, OTP protected and KT200 ecu programmer not write other file.
EDC17 OTP ERROR solution:- think due to try to write FULL flash not partial. Please read password before writing file for test.
Must read password first to write full flash.
If you have other editor that you can do compare on Original and Modified file to see if any noticeable differences i.e. address location shift, if want send KT200 technician both files as would like to address this problem.
