Program 2017 Volvo S60 All Keys Lost by Autel IM608
2017 Volvo S60 all keys lost is done with Autel MaxiIM IM608.
AUtel IM608 Add 2020 Toyota RAV4 Key via OBD Without Incode
Add an OEM key to a 2020 Toyota RAV4 with Autel IM608 successfully. Same procedure as RAV4 2022 (check previous post). Go control unit – keyless, then I can select backup immo data-back up through OBD, then add a key WITHOUT 3 lines data and pay for the code. If choose add a key directly, then the programmer will spit out those 3 lines data and ask for a code.
When backing up data, the dashboard will display engine has issues, steering wheel have issues,blah, blah,blah as the backup process going, quite nerve racking but once is finished, everything is fine.
You can if it is lost all keys, there is a choice of using apb112. But my case is to add a key.
After backup immo data, then select add key, then it will ask you if you backed up data or not, then select the file, then same old Toyota beep beep beep process.
Great job Autel.
How to Add Nissan Qashqai 2015 Key by Autel IM608?
Nissan Qashqai 2015 Add a key with xhorse mqb proximity key.
Had the bcm that is listed on the naughty list.
These bcm numbers are well known for being problematic. (Where to Find Nissan Black BCM List?)
Programmed with autel im608 pro.
With battery support. battery support is needed. my keeps the battery at 14.2 volts.
All working great.
When you add the mqb xhorse remote you take the board out of the case and battery out then touch to ignition switch.
Where to Download Autel MaxiFlash Driver for Passthru/
Question: where to get drivers to use Autel IM608 MaxiFlash JVCI as passthru J2534?
Answer:
Just download the autel PCsuite and it’s in there.
Download driver on Autel official website here https://www.autel.com/download.jhtml
Follow instruction here to download and install driver step by step.
Download and Install Autel IM608 JVCI J2534 Driver for OEM Software
Autel JVCI works pretty good. I’ve already tested with Bmw, psa group and opel/ Vauxhall and gm. Works as it should. You have to download maxi suite and then pay the subscription with certain make to b able to download their software and than just set up jvci as the device.
It’s approved by all oem software. Can use with any software that works with j2534, just download drivers from Autel. People have tested working with
JLR SDD
GM GDS2 SPS
ODIS
Xentry
Ford FDRS
BMW ISTA
Honda HDS
Techstream Toyota
PCMflash (but there is some modules that u need to use scanmatik2 or pcmflash flash box.)
etc
Where to Download MINI VCI Win10 64bit Driver?
I recently purchased a Mini-VCI J2534 cable from obdii365 for future car improvements.
Although the site was listed version 18. I do not need this program, just for information.
I encountered such a problem that in the disk "MVCI Driver for TOYOTA.msi" the driver was only for 32-bit Windows OS, and I have Windows 10, x64 bit installed on my laptop.
I searched for a driver on the Internet for a long time and came across one, where he left a link to the desired driver and thanks to him for that!
Download "Mini-VCI-Setup.exe" and run, the installation is standard. After installation, this cord appeared in the MMCodingWriter settings and connected to the car without any problems.
Autel MaxiCOM MK808 March 2023 Review
I have been looking for a universal diagnostic scanner for a long time, since sometimes I have to work with various brands of cars and not only with the VAG VW Audi Seat Skoda brands, so I compared competitors for a long time, especially Launch X431, why i finnaly choose Autel MaxiCOM MK808BT?
Firstly, affordable price, this is a good quality multi-brand, it works with a Bluetooth mini adapter without cables, it is very important and convenient, free updates for one year and after the license expires the device still works. Further, the device is not blocked and without restrictions with all brands and updates up to 2022 also works, but if you need new brands and updates from 2022, then we buy a license and finish new updates and car brands, for example, a 2023 VW Golf 9.
The device has already been tested at work with the VAG cars, it reads all the modules and finds all the errors. It skips the service interval, code the injectors, spread the brake pads with electric handbrake, teach the clutch unit, teach the VGT turbine, register a new battery, teach DSG boxes and automatics, regenerate DPF, register regular keys, tire pressure sensors, you can view real-time data, and many more features that I haven't even tested yet.
The set includes a convenient protective case, the tablet itself, cables and charger, instructions and a license for a year.
Is he worth his money? For me, it’s worth it, or rather. Autel MK808BT scanner has already paid off for me and did not allow me to buy a lot of auto junk.