Overblog Suivre ce blog
Editer l'article Administration Créer mon blog

OBD2 Tools

OBD2 Tools

OBD2 diagnostic tools & software technical service


Creator Scanners C500 C310 C110 C330 Update Guide

Publié par JTAC sur 1 Janvier 2017, 22:49pm

Catégories : #Creator C500, #Creator C310, #Creator C500 scanner

Creator C500 is newly released BMW Honda OBDII EOBD diagnostic scan tool, some friends have bought this scanner and ask ‘How to update Creator C500 since it is described as update online’, here i will tech you how to update Creator products (incl C500,C310,C330, C100,C110 etc) step-by-step.

 

Note: Update method is applicable to all Creator products

 

Step-by-step procedure:

Step 1. Setup Update tools

Download the update tool from official website

creator-products-software-update-1

Double click the [Setup file] to setup the tool. Operate follow the instructions, and finish to setup.

After finish setup, there will be a icon of scanner in desktop.

creator-products-software-update-2

Step 2. Download the software

Download from official website

creator-products-software-update-3

Note: C100 and C110 software is only fix SN is C1XX 002000 02 or later

creator-products-software-update-4

You can find the software what you want.

 

Step 3. Run the update tool

Double cleck the update tool icon and Run the update tool and Operate in accordance with photographs

creator-products-software-update-5

Used the USB cable connected to scanner and PC, if connect success, the software on pc will shown as below

creator-products-software-update-6

Click [Update] button.

creator-products-software-update-7

Cleck red rang , you can change the path , and find the updatefile which recive.

creator-products-software-update-8

Select update file and click [open] button.

Into the upgrade interface, wait for the end of upgrade

WARNNING:

Do not power off during upgrade!

Do not Plug or Unplug USB tools during upgrade!

 

Step 4. Start Update

Waiting for a few minutes. The software will update the scanner tool.

creator-products-software-update-9

Finish Update.

When the update is finished , the screen on PC will show as below.

creator-products-software-update-10

If update success, the software will display [Update success!];

if update fail, it will display [Update fail! Try again].

Press [finish], the scanner is already updated, and you can unplug the scanner from PC.

http://obdii365.blogspot.com/2017/01/how-to-update-creator-c500-scanner.html

Archives

Nous sommes sociaux !

Articles récents