ecu becnh tool
How to Solve ECU Bench Tool “S1 S2 Pinout Error”?
15 Septembre 2022 , Rédigé par JTAC Publié dans #ecu becnh tool
Problem:
The ecu bench tool device has stopped communicating with the ECU. S1 error s2 pinout error. edc17 doesn’t connect either. I connect it well.
Solution:
Make sure the driver has been installed and the wiring connection is correct.
Don’t connect according to the color of the cables, follow the name marked on the cables.
Hold the Reset button to reset the device. Hold it till lights flash. And restart software.
If not working, download/ install both software and try again.
Download EBTSetup
ECU Bench Tool AMT Offline Software Download
Don’t run software or firmware online updates, otherwise, we are not responsible for the damage.
Newsletter
Abonnez-vous pour être averti des nouveaux articles publiés.
Pages
Catégories
- 77 autel im608
- 25 obdstar x300 dp plus
- 23 autel im508
- 22 KT200
- 14 Autel KM100
- 14 lonsdor k518ise
- 13 pcmtuner
- 12 yanhua acdp
- 11 launch x431
- 9 CG FC200
- 7 MINI VCI
- 6 foxflash
- 5 mb sd c4
- 4 scania sdp3
- 4 xtool x100 pad2
- 3 autel ultra
- 3 mini vci
- 3 obdstar p50
- 3 techstream
- 3 vvdi2
- 3 witech micropod 2
- 2 BMW ICOM Next
- 2 CG100
- 2 CGDI FC200
- 2 Hextag
- 2 Honda HDS
- 2 autel ap200
- 2 cgdi mb
- 2 digimaster 3
- 2 iprog
- 2 kess v2
- 2 ktag
- 2 obdstar ms80
- 2 ts401
- 1 Autel MaxiSys
- 1 CGDI BMW
- 1 Ford IDS
- 1 OBDSTAR MT200
- 1 audi j518 emulator
- 1 autel km100
- 1 autel md808
- 1 autel mk808
- 1 autel ms906
- 1 autel ms908s pro
- 1 autel scanner
- 1 autel smart keys
- 1 autohex ii
- 1 cn900 mini
- 1 damos file
- 1 dflash