OBD2 Diagnostic Tools

 Can Autel MK808 program keys? The answer is: Yes, Autel MaxiCOM MK808 scan tool will be able to reprogram key to new ecu for compatible vehicles, kindly check the detailed vehicle coverage from the link:

https://www.autel.com/vehicle-coverage/coverage2 (Select Product Model MK808, Vehicle make, vehicle model, Year and function /sub-function)

Take some confirmed car models for example:

√Program 2004-2014 Acura Tl all keys lost using autel mk808 + used key programming.

√Program Honda civic keys to the vehicle using autel mk808.

√AUTEL MK808 Dodge Chrysler Key Programming

√Program a key fob for Suzuki swift 2012

√Autel MK808 scan tool performs KEYLESS REGISTRATION function and program a key on a 2003 Nissan 350z.

√ AUTEL MK808 Program key for Honda Acura (Read the step-by-step guide)

For those car models that Autel MK808 failed to program key, which Autel to own?

If you found Autel MK808 Diagnostic Scanner cant not make key programming for your car, we recommend you Autel IM608 automotive key programmer and diagnostic scanner. IM608 has this function. IM608 is equipped with Autel XP400 Key Programmer and MaxiFlash ECU Reprogrammer. IM608 is the most advanced and the unique all in one key programming and diagnostic tool that is destined to be the unprecedented key programming tool that you ever wanted.

And for Autel IM608 coverage, you can refer at the same link as that of Autel MK808.

How to use AUTEL MK808 IMMO Service?

An immobilizer is an anti-theft mechanism that prevents an automobile’s engine from starting if the correct ignition key is not used or other device is present. This device prevents thieves from starting the vehicle by a method known as hot wiring. Most new vehicles have an immobilizer as standard equipment. An important advantage of this system is that it doesn’t require the vehicle owner to activate it; it operates automatically. An immobilizer is a more effective anti-theft protection than an audible alarm alone; many auto insurance companies offer lower rates for vehicles that are equipped with them.

As an anti-theft device, an immobilizer disables one of the systems needed to start a vehicle’s engine, usually the fuel supply or the ignition. This is accomplished by radio frequency identification between a transponder in the ignition key and a device called a radio frequency reader in the steering column. When the key is placed in the ignition, the transponder sends a signal with a unique identification code to the reader that relays it to a receiver in the vehicle’s computer control module. If the code is correct, the computer allows the fuel supply and ignition systems to operate and start the vehicle. If the code is incorrect or absent, the computer disables the system, and the vehicle will be unable to start until the correct key is placed in the ignition.

The IMMO service of MK808 enables you to disable the lost vehicle keys and program are placement key fob. One or more replacement key fob can be programmed, depending on your needs.

To program the replacement key fob(s)

1. Tap “IMMO KEYS” after entering the “Service” function from the MaxiCOM Job Menu.

2. Tap “Automatic Selection” or “Manual Selection” to acquire vehicle VIN information and tap Yes to confirm.

3. Tap “Erase/Program all key fobs” in the IMMO function list after it is displayed, the list may vary for different vehicles being tested.

NOTE

1) To complete key fob programming, you need to acquire the Security Code, which can be acquired through the Security Code Read function in hot functions.

2) Before programming, please check and erase the fault codes.

4. Read the on-screen information carefully and follow the instructions to complete the operation.
5. 
6. 

Enjoy!

www.obdii365.com

 Check easy steps to register and update Autel MaxiCOM MK908 coding scanner. 

First use the scanner need to create an Autel ID

Create Autel ID with user name and password
You will receive an verification email

Sign in with email, password and verification code

Then register MK908 with serial number

Register success

Now you can update software

 Problem:

I tried to enter local host in MB SD Connect C4 EWS software, it failed me and reported error "This site cannot be reached"

Solution:

Press windows icon on the tool bar. Find EWS program

Right click to open EWA as administrator 

Then Started EWS server 

It will show online status if it is working.

 

 

 

www.obdii365.com

 Question:

Can i program key 2006 Land Rover if i buy the double can adapter with Yanhua Mini ACDP Module 9?

Answer:

ACDP Mini supports following old Land rover models (require double CAN adapter).

Freelander 2 (2010-2014)

Discovery 4 (2010-2014)

Range rover (2010-2015)

EVOQUE (2010-2015)

FreeMan (2003-2005)

JLR Module 9 does not contain Double CAN adapter, you can get it from Volvo Module 12.

If you don't want to buy module 12, you need to purchase the double CAN adapter separately.

 A Mercedes Benz Xentry DAS software user feedback: Xentry works, Das problem and this is the wrong with the DAS software “This software does not accept more hardware changes…”

And this is my Xentry DAS software version:

Obdii365.com Technical Support:

Please send teamviewer to see it remotely

And when he helped me fix the problem by team viewer, I took a screenshot two images showing they are very skilled with this problem troubleshooting.

In 2 minutes, the seller’s engineer replied:

das software problem has been resolved.

You have 12/2018 Xentry software, and the DAS software is not activated, I helped you activate DAS and it will work.

And you can read the guide on how to activate 12/2018 DAS software:

http://blog.obdii365.com/2018/11/27/activate-2018-12-mb-sd-connect-c4-xentry-openshell/

Big thanks to them for quickly help me solve the problem.

For your information, suggest you own the newest version 03/2021 Mercedes Benz Xentry DASsoftware for sd connect c4.

 Question:

First comes with Launch X431 V /X431 V+/X431 PRO/ PRO3/ PAD2 Wireless Printer Setup

procedure . Then how to print Health Reports wirelessly from Launch x431 V scan tool.

Part 1: Launch X431 V /X431 PRO/ PRO3/ PAD2 Wireless Printer Setup

Firstly, you have to set up a printer plugin for the first time you use it, it should prompt you to install the correct one, be sure that you’ve selected correct printer and click the print icon.

Step 1. Android devices do not have “drivers” built into the tablet, so you haveto download your wireless printers’ specific app from either “google play store” or the printer manufacturer’s website.

Step 2. Install the wireless printer app onto the X431 tablet and follow the on screen instructions.

Step 3. Configure the app you installed on the tablet to your wireless printer

Step 4. You can now “share” any images, screenshots and X431 diagnostic reports via the app to your own wireless printer.

5. To access this menu press the “share” icon and then select your printer app.

Part 2. How to print Health Reports wirelessly from Launch x431 V scan tool

You can see, I have already completed the health report for this vehicle, now I need to click on “Report” at bottom and enter the relevant information, click on “ok” and it will give me a PDF version.

Next I choose “Save as PDF”.

Now I can exit the launch software, I have Adobe Reader installed, I open reader and find the file, after it loads I go to the menu at the top right corner and click on “Print”.

That’s it. I hope it helps.

Enjoy!

https://www.obdii365.com/service/how-to-set-up-mini-wifi-printer-for-launch-x431-vv.html

I’d like to share my experience with the AT-200 ECU Programmer and MSV80 unlock upgrade.  I had three codes on a customers’ vehicle that came in 2011 BMW 328Cic:

2E7C BSD (Bit-Serial Data Interface) data bus communications fault

2F71 Digital Motor Electronics (DME): electronics box fan, activation

2B3D Diagnostic Module Tank Leakage (DMTL), system fault

While it’s possible all these present faults could be true, it would still be unlikely so I decided to replace the DME.  I had used the AT-200 to replace other ECUs without issue and very easily (MSV80 license is required), however, the MSV80 instructions involves soldering chips on to the board and the instructions are just a small resolution image.  I did not know the orientation of the TJA1050 so I used a multimeter and the data sheet of the chip to determine the correct orientation on the board via voltage and ground.  For the other small resistors I did not know the size and ordered them based on guess and parameters given.  They are 1.6mm in length.  I also had to add another CAN-H and CAN-L wire to my AT-200 plug.

Chips I used: 

771-TJA1050T/CM118 TJA1050T/CM,118, 594-MCT06030D2201BP1 MCT06030

D2201BP100, 80-C603C104K5RAC3121 C0603C104K5RAC3121

After adding the chips I had no issue reading ISN, writing ISN, and for me Backup and Writing of the DME.  I plugged the DME in the car and started it right up without any other ISN changes to CAS or anything else.

Good to know:

1. Please make the connections shown in the above image 4, because someone feedback he tried to identify the ecu he get the error: connection failed.

2. You are at your own responsible for any risk when you make the connections by following the above images, because it is from one AT200 user @ wase17.

Alright, hope this article helps those in need and who are curious about this AT-200 ECU Programmer.

 Since the service interval reset of Porsche Panamera 2018 Hybrid cannot be done by our own tester, it is a request from the same trader to do it.

Although it is a 2018 model and an older model, when I first tried it with LAUNCH CRP239 that it could be done easily, although there were items, when I executed it, a message like "Power was cut off" appeared in the meter It cannot be reset.

Is it impossible with LAUNCH? .. .. Disappointed, the AUTEL MS909 can afford it! And MS909 are connected, and when you click the service reset, "Confirm that you are connected to the net" is displayed, and it seems that it resets online.

Since you are connected to the internet, click "OK". It seems that AUTEL has not yet supported it because it says "not supported" when I look around and expecting what will be displayed next .

Does Porsche even have to do a service reset online at this model year? .. .. I felt a little uncomfortable when it was a difficult time, but next time I connected BOSCH with no use .

The service reset was not supported just because it was found that "service reset is possible only with the diagnostic machine".

Finally, I thought that LAUNCH would not be compatible because it was impossible with CRP239, but I connected LAUNCH's highest peak model " X431 PAD V ".

It was a bit different from the usual procedure, but it was easy to reset offline instead of online functions.

After all, regarding Porsche, it was Panamera's service reset that I was convinced that PAD V was one step ahead of other general-purpose machines .

If you are interested in X431 PAD V, contact 

Whatsapp: +86 18259252285

Email: Sales@OBDII365.com

Skype: OBDII365.com

 Thinkcar Thinkdiag can be activated with PRO Software for full car brands with special functions.

What’s included of THINKDIAG full software pack?

-Full car brands. All manufacturer software for free

-All special functions unlocked, ECU coding, Bi-directional testing and adaptations.  

How to to activate thinkdiag to full brands?

Way 1:

Purchase  Thinkdiag All Car Brands Activation License

Provide your Thinkdiag adapter serial number to oobdii365.com customer service

You’ll be informed once activation is done.

Way 2:

 The official website ThinkDiag offers a good price for activation of all car brands.

The official website offers all car brands (115 PCE) for 199$ including reset of service intervals (16 PCE) with 2-year updates.

Download latest Thinkdiag App
Go to ThinkStore, press yellow icon
Select All manufacturer software 2 years & All reset software 2 years (Free update) pack, Press Next
Fill in payment information
Purchase license
Now enjoy thinkdiag with all car software.

Activation of Thinkdiag is possible for all car brands. The full package of car brands is available with 2 year of updates. After two years, you can renew your subscription or use those car brands that were downloaded at the last moment. In case you do not plan to renew your subscription, keep a folder with the car brands. Then, if your tablet is lost or broken, you can transfer all data to another Android device without buying a subscription.

Activation of all brands is only available for Android. Users of iOS devices can use the official Thinkdiag software. Truck activation is also available with annual updates. To activate Thinkdiag, you should first check the adapter for proper functionality.

*Activation of ThinkDiag on your own is impossible. The only way out is to disassemble the adapter and change the chip.

Is it worth buying full activation?

You can buy Thinkdiag with 2 free car brands. After one year, you will have to pay for software renewal. The renewal of the car brand is USD 39.95, the renewal of resets is USD 49.95. 

All car brands can be opened with 2 year of renewals. Trucks are also available which can be connected via a 24 V amplifier.

To use the scanner with all car brands, there is Launch (X431 V, X431 V+) still available. In other cases, when the scanner is purchased for personal needs for 1-2 cars, you can consider Thinkdiag obd2 scanner.

Q: app download link thank you

 Offer working solution to Lonsdor KH100+ error ” can’t detect a key”. Thanks to obdii365.com engineer.

First, let’s describe what the problem is.

Image 1: Turn on Lonsdor KH100+, agree the disclaim, enter “Identify Copy”, as shown in the pic, put a chip, click OK. And it always shows “Please wait, identifying” and no key result.

Image 2. Back to the home, enter “Remote control function”, then “Remote Frequency”, put remote control to detect, and the frequency is :0.000 Mhz.

So, what is the solution?

Please download KH100 Update Tool.exe here:

https://mega.nz/file/8VxhiKJL#JH4mL8a6PSFEeZGDi_kUzzfNivP6JFS2ajxqGmjj3P4

It contains “Steps video.mp4” guiding you how to use this .exe file.

Steps:

Step 1. Install .Net Framework 4.6.1.

Step 2. Unzip the above file.

Step 4. Use the USB cable to connect Lonsdor KH100+ to the computer, long press the “Down” button for few seconds and then press the power button once.

Step 3. Hold the “Down” button for a few seconds and press the power button once, you will enter USB data mode.

Step 5. Open the above repair file, click on “KH100UpdateTool.exe.”, then “Update”, soon you can see “Update completed”.

Step 6. Back to KH100+ and press “OK” button, and the device will update automatically,  you just check whether it will work normally.

Alright, any question on Lonsdor KH100+, contact at www.obdii365.com

 My Launch X431 V 8 inch tablet worked find but today it reports 2 errors:

"X-431 V has stopped"

"DiagbaseService keeps stopping"

Obdii365.com solution:

 Problem: 

I received the Xtool PS90 tablet. When register to activate the scanner, it kept giving network error but network is working my account keeps informing me i signed in but the tablet says not its frustrating any software i can download to fix?

Solution:

Check network connection. If network connection has no problem. The error may cause by the low App version.

Delete older Xtool App and install latest version. Problem will be solved.

The solution fits other Xtool products, X100 PAD, X100 PAD2 etc.

 Question:

Fiat 500 add two new keys but how do I make them dealer keys so they will program by the Autel MaxiIM IM608 ? I have one working key and im608 read pin correctly.

 

 

Suggestion:

Need to read immo data first there should be make dealer key option once you’ve ready immo data. It’s not just pin must read immo data. You have to read immo data make a dealer key learn the keys 100% .

 If you have a working key you select 2 keys to program or in this case you would select 3 keys to program as you wants to add an original and 2 new remotes.

Program working key first followed by the next 2

Unavailable keys are only erased permanently from the system and cannot be used again once the procedure has been completed.

Go into immo system first and you will see -

Read password

Generate dealer key

Program key

Follow in that order

Program original in first followed by 2 new keys.

 

 

 

 

 Launch X431 V+ and HD3 Module is more than a professional diagnostic tool for heavy duty truck till2020 year, it also performs 15 special functions. It’s nice features are Simple tablet appearance, high-definition touch screen (1920*1200), high-speed running speed (Lenovo Tablet TB-X605FC, Android 9，RAM 2G  Storage 32GB CPU Snapdragon 450 Display), it also supports multi-language English, German, French, Italy etc.

However, to protect Launch X431 V and data safety, also enjoy the free update, you are required to register a member for the first time.

There are 6 steps to follow:

Step 1. Choose “Login”.

Step 2. Choose “New registration”.

Step 3. Input the user name & password, input the password again. Input the usual email address. Choose the country. Input the CAPTCHA verification code. Tap “Register”.

Step 4. Open the envelope in the product, input the SN number inside, and activate the password–click ACTIVATE

Step 5. Congratulations! you’ve registered successfully, you are ready to use the machine.

Step 6. Software update.

Select all available newest truck software to update, just wait until it succeed.

Besides, after entering “User Info”, there are ” Activate VCI” and “Firmware Fix”, just click on them and follow the screen to do.

Now you start take advantages of that Launch X431 V+ and HD3 Module bring you.

It has a wide vehicle brand coverage: truck, bus, machinery, Engine, New Energy.

It optimize a new function “Camera scan VIN”.

It can do: read vehicle information, read DTC, clear fault memory, read data stream, read freeze frame, actuation test, feature and parameter, advanced ECM data.

What’s more, it has one option “Feedback “. In the process of testing, if you can’t test or encounter other problems, you are allowed to submit the logs in testing to the Launch server.  Then the engineers will analyze and find out the problem to help you solve it.

This is only for 12V to 24V diesel truck only. If you need to diagnose both gasoline and dieselvehicles, please check  LAUNCH X431 V+ with HD III for Cars & Trucks.