OBD2 Diagnostic Tools

 Problem:

2022 Volvo XC90. Successfully read immo data CEM icp with Yanhua Mini ACDP module 20.
But can’t add key through obd.
Say Unable to communicate when connected
To obd to add key. How to fix it?

Possible solution:

To add key Volvo 2022-, make sure you have license A303 activated.

1). Stared over and it worked with no issue.

2).  I had the same problem so what I did was program it under couple years before 2018-2019 it went thru fine.

3). Happen to me same thing with different model
Transfer the file to Autel IM508 and get it done.

4). Use Autel IM608 or Lonsdor K518 Pro.

On the 8hp70 dodge you have to supply external power to ignition + or OBDSTAR DC706 wont read.  TCM wants a constant power feed even when switching P004 on and off. The other power needs to switch on and off with the switch.

i have done quite a few and used the wiring diagram on the tool, no issues. That said, i started using a harness with external power and does work better/easier.

 OBDSTAR X300 DP Plus/X300 Classic G3/X300 Mini series released new Immobilizer software upgrade on June 15th, 2024.

FIAT/ALFAROMEO/MASERATI [Version: V42.94] 

1. Add proximity key programming function for below models:
• ALFAROMEO GIULIA 2022-2023
• ALFAROMEO STELVIO 2022-2023
• ALFAROMEO TONALE 2022-2023
• FIAT ASIA 500X 2022-2023
• FIAT AUSTRALIA 500X 2022-2023
• FIAT EUROPE 500X 2022-2023
• FIAT NORTH AMERICA 500X 2022-2023
• MASERATI GHIBLI 2022-2023
• MASERATI GRAN TURISMO 2022-2023
• MASERATI GRECALE 2022-2023
• MASERATI LEVANTE 2022-2023
• MASERATI MC20 2020-2023
• MASERATI QUATTROPORTE 2020-2023

2. Add blade key programming function for below models:
• FIAT AFRICA 500 2022-2023
• FIAT AFRICA FIORINO 2022-2023
• FIAT AFRICA NEW FIORINO 2022-2023
• FIAT AFRICA TIPO 2022-2023
• FIAT ASIA 500 2022-2023
• FIAT ASIA 500C 2022-2023
• FIAT ASIA FIORINO 2022-2023
• FIAT ASIA NEW FIORINO 2022-2023
• FIAT AUSTRALIA 500 2022-2023
• FIAT AUSTRALIA 500X 2022-2023
• FIAT AUSTRALIA DUCATO 2022-2023
• FIAT AUSTRALIA PANDA 2022-2023
• FIAT EUROPE 500 2022-2023
• FIAT EUROPE 500C 2022-2023
• FIAT EUROPE 500X 2022-2023
• FIAT EUROPE DUCATO 2022-2023
• FIAT EUROPE FIORINO 2022-2023
• FIAT EUROPE NEW FIORINO 2022-2023
• FIAT EUROPE PANDA 2022-2023
• FIAT EUROPE QUBO 2022-2023
• FIAT EUROPE TIPO 2022-2023
• FIAT MIDDLE EAST 500 2022-2023
• FIAT MIDDLE EAST FIORINO 2022-2023
• FIAT MIDDLE EAST NEW FIORINO 2022-2023
• FIAT MIDDLE EAST PANDA 2022-2023
• FIAT MIDDLE EAST TIPO 2022-2023
• FIAT NORTH AMERICA 500 2022-2023
• FIAT NORTH AMERICA 500C 2022-2023
• FIAT NORTH AMERICA 500X 2022-2023
• FIAT SOUTH AMERICA 500C 2022-2023
• FIAT SOUTH AMERICA NEW FIORINO 2022-2023
• FIAT SOUTH AMERICA TIPO 2022-2023
3. Optimized software.

CHRYSLER/DODGE/JEEP V43.69
1. Add proximity key programming function for below models:
• DODGE ASIA RAM TRUCK 2021-2023
• DODGE ASIA RAM 1500(DT) 2019-2023
• DODGE ASIA RAM 4500 2021-2023
• DODGE ASIA RAM 5500 2021-2023
• DODGE AUSTRALIA RAM TRUCK 2021-2023
• DODGE AUSTRALIA RAM 1500(DT) 2019-2023
• DODGE AUSTRALIA RAM 4500 2021-2023
• DODGE AUSTRALIA RAM 5500 2021-2023
• DODGE EUROPE RAM TRUCK 2021-2023
• DODGE EUROPE RAM 1500(DT) 2019-2023
• DODGE EUROPE RAM 4500 2021-2023
• DODGE EUROPE RAM 5500 2021-2023
• DODGE S.AMERICA RAM C/V Tradesman 2012-2015
• DODGE S.AMERICA RAM TRUCK 2021-2023
• DODGE S.AMERICA RAM 4500 2021-2023
• DODGE S.AMERICA RAM 5500 2021-2023
• DODGE USA-CANADA RAM 4000 2019-2022
• DODGE USA-CANADA RAM 4000 2013-2018
• DODGE USA-CANADA RAM C/V Tradesman 2012-2015
• JEEP ASIA WRANGLER 2020-2023
• JEEP ASIA GLADIATOR 2020-2023
• JEEP AUSTRALIA WRANGLER 2020-2023
• JEEP AUSTRALIA GLADIATOR 2020-2023
• JEEP USA-CANADA WRANGLER 2020-2023
• JEEP USA-CANADA GLADIATOR 2020-2023

2. Add blade key programming function for below models:
• DODGE EUROPE RAM SRT-10 2006
• DODGE EUROPE RAM SRT-10 2004-2005
• DODGE S.AMERICA RAM C/V Tradesman 2012-2015
• DODGE S.AMERICA RAM V1000 2014-2023
• DODGE S.AMERICA RAM V700 EXPRESS 2014-2020
• DODGE USA-CANADA PROMASTER VAN 2013-2023
• DODGE USA-CANADA RAM 4000 2009-2012
• DODGE USA-CANADA RAM C/V Tradesman 2012-2015

3. Add fobik key programming function for below models:
• DODGE S.AMERICA RAM C/V Tradesman 2012-2015
• DODGE USA-CANADA RAM 4000 2013-2018
• DODGE USA-CANADA RAM C/V Tradesman 2012-2015

FORD [Version: V44.86]
1. Add blade key programming function for FORD USA-CANADA Fl50 2004-2008 TYPE 3.

2. Optimized software

 Here comes the similar problem:

Mazda 6 keyless 2013.Today costumer asked to program additional key to car, all went good both keys working central locks working, car starts with both keys, but on dash message come up (keyless system inspection required) anyone had this problem? how to get rid of that?

Possible reason:

That’s happens when the new key has different number of buttons, or different part number.

It has to be exact part numbers.

Solution:

You can fix it via All key lost, erase all keys and program two correct keys.

Either you have to program 2 OEM keys, or 2 Xhorse keys. It doesn’t work with 1 OEM and 1 aftermarket.

User report:

Had the same issue on a CX5. I had to use an Xhorse smart proximity key, then with special functions on VVDI Key Tool Max use the Mazda Smart key repair, read original key and write data over. Then perform all keys lost, rewrite original key and new key and the error was corrected.

Otherwise you will need an original Mazda key with exact ID, then do AKL and add in both keys.

If got the Keyless system malfunction error, follow solution here

Mazda ID49 Smart Key Keyless Entry Malfunction Error Solution

 Problem:

Read VAG MQB data today, ready to make dealer key with Yanhua Mini ACDP2.

Keeps giving me this message “PCF-Key Adapter Version is Low, please update the adapter firmware”

Solution:

Go to the Special function and update PCF key adapter firmware.

 Problem:

I was trying to add BMW motorcycle ID46 mechanical key with OBDEMOTO 900PRO motorcycle key programmer, network was enabled, when read key ID, the device says i don’t have permission for this model.

Any idea?

Solution:

OBDEMOTO 900 Pro comes with 20 free tokens. 

Contact www.obdii365.com customer service to activate tokens for free.

Need to activate and add tokens when tokens are used up. 

 Toyota Hilux proceeding year 2023 very easy with Autel KM100.

Just add key and he gives us the procedure.

only duplicate asks you the already registered control to add the new one. Customer bought the original key.

KM100 is definitely my favorite for vehicles with Start button.

 Unleash the Power of Autel EV Diagnostic Tools: Discover Hidden Features! 

Are you truly tapping into the full potential of your EV diagnostic tools? At AUTEL, we're excited to unveil some game-changing features that many users might not be aware of in our SECURE HIGH-VOLTAGE SYSTEM TESTING & ANALYSIS The Ultra EV and MS909 EV tools. These tools aren't just for basic diagnostics—they're equipped with advanced capabilities to take your EV maintenance to the next level!


1. Battery Testing (On-board and Off-board)
Don't settle for guesswork when it comes to your EV's battery health. Our tools support dynamic high-voltage battery testing via OBD, providing real-time insights into your battery's performance. With the ability to record individual values and generate comprehensive reports, you'll have the data you need to make informed decisions about battery maintenance and replacement.

2. HV Components Test
Ensure every component of your EV's high-voltage system is functioning optimally with our HV components test feature. Whether it's the compressor, DC/DC converter, or onboard charger (OBC), our tools offer comprehensive part testing capabilities, giving you peace of mind knowing that your EV's vital components are in top condition.

3. SOH Assessment
Understanding your battery's State of Health (SOH) is essential for maximizing its lifespan and performance. With our tools, you have two powerful methods for SOH assessment:
- Read Directly from BMS: Access estimation information provided by the Battery Management System (BMS) or battery manufacturer, giving you accurate insights into your battery's health.
- Autel AI SOH Solution: Harness the power of artificial intelligence (AI) technology, which analyzes massive real vehicle charging and maintenance data, along with battery electrochemistry library data, to provide you with unparalleled SOH assessments.

Don't let these advanced features go unnoticed! With AUTEL's EV diagnostic tools, you have the tools and insights you need to keep your EV running smoothly and efficiently. Ready to unlock the full potential of your EV maintenance? 

 Here comes the problem:

I have a opel corsa F 2022 with 4A chip, all keys have lost.
Have pin code and tried to do key programming. Aftermarket didn’t work and xhorse remote didn’t either any help please?

Solution:

Better use OEM key for Opel.

You can also use Xhorse key (MQB or PSA 4A key).

We can use xhorse. If it’s all keys lost wait for hazards to drop flashing. Once hazards have stopped it will program right in.

Akl leave ignition on for 30 mins until hazards stop flashing before programming key.

Its PSA system. Use this firmware and it should work.

Xhorse

Keydiy

User feedback:

1). Programmed 2020 Opel Crosssland with Xhorse key no problem. Used autel for programming.

2). I use PSA 4A on Grandland X no problem.

3). It will work I have same issues Id4A chip I choose this smart key but actually my car doesn’t have smart key system at end all work find use this remote(XSMQB1EN)

4). I have a 22 player Corsa f I put a Xhorse mqb key on that when I first got in 2 years ago and it’s still going.

 It is a 2020 Subaru Crosstek with push to start proximity, all keys have lost.

Lonsdor does make a key that will work for this. We are able to use the Lonsdor LT20 Toyota smart key and generated as the Crosstek key.

So we have a Lexus style key that's already been generated.

We are going to use the Autel KM100 to back up the IMMO data, create an analog key and use the Add key function to add this key.

We are currently backing up this data and then once this is done, we will go into analog key.
Three keys are the max and we have to erase keys if need more.

I actually looked at how many keys were in the system.
It told me two were in the system.
It let me add this key with the analog key and not have it erase anything.

Image attached:

 OBDSTAR DC706 released new ECM software V30.80 on June 1st, 2024. The upgrade can also be applied to OBDSTAR X300 Classic G3 with ECU flasher license.

These upgrades adds read pin reading and mileage calibration for many ECUs.

ECM V30.80

1. Add Read/Write INT flash and Read/Write INT eeprom functions for below models:
• AGCO BOSCH EDC17CV54 TC1767
• BENZ DELPHI CPC2.XTC1793
• CASE BOSCH EDC17CV54 TCI767
• CHALLENGER BOSCH EDC17CV54 TC1767
• DEUTZ BOSCH EDC17CV54 TCI767
• FENDT BOSCH EDC17CV54 TCI767
• HYUNDAI KEFICO CPEGD2.20.3 TC1782
• JCB BOSCH EDC17CV54 TCI767
• JOHN DEERE BOSCH EDC17CV54 TC1767
• KIA KEFICO CPEGD2.20.3 TC1782
• KOMATSU BOSCH EDC17CV54 TC1767
• MASSEY FERGUSON BOSCH EDC17CV54 TC1767
• MITSUBISHI FUSO BOSCH EDC17CV54 TC1767
• VALTRA BOSCH EDC17CV54 TC1767

2. Add Read/Write INT flash, Read/Write INT eeprom and Mileage Calibration functions for below models:
• SKODA BOSCH ME17.5.22 TC1724N(BOOT)
• VOLKSWAGEN BOSCH ME17.5.22 TC1724N(BOOT)

3. Add Read/Write INT flash, Read/Write EXT flash and Read/Write EXT eeprom functions for below models:
• AUDI BOSCH MED9.1 MPC563(4)
• AUDI BOSCH MED9.1.1 MPC563(4)

4. Add Read/Write EXT flash functions for below models:
• AUDI BOSCH MED17.5.1 TC1796
• SEAT BOSCH MED17.5.1 TC1796
• VOLKSWAGEN BOSCH MED17.5.1 TC1796

5. Add Read/Write EXT flash and Read/Write EXT eeprom functions for below model:
• BMW BOSCH EDC15C4 KLINE 29F400BT+95P08

6. Add Read/Write INT flash and Read/Write EXT eeprom functions for below models:
• BENZ DELPHI CRD2.XX MPC5566+25LC256
• VOLKSWAGEN BOSCH ME7.5.20 KLINE ST10F275+95040(BOOT)

7. Add Read/Write INT flash, Read/Write INT eeprom and Read ISN Code functions for below model:
• BMW BOSCH EDC17C50 TC1797

8. Add Mileage Calibration New Types function for VOLKSWAGEN series MED17XX TC1766. 

9. Add New Types INT eeprom Data Convert(CLONE) for VOLKSWAGEN series EDC17C46, MED17.5.25, MED17.5.20.

10. Add Write ISN Code function for below models:
• BMW BOSCH EDC17C06 TC1766
• BMW BOSCH MEVD17.2.3 TC1793
• MINI BOSCH EDC17C06 TC1766
• MINI BOSCH MED17.2 TC1766

11. Add Write VIN function for below models:
• AUDI BOSCH MED17.1.21 TC1793
• AUDI BOSCH MED17.5 TC1766
• AUDI BOSCH MED17.5.21 TC1782
• AUDI BOSCH MED17.5.25 TC1782
• DODGE BOSCH ME17.9.11 TC1766
• HYUNDAI BOSCH EDC17C08 TC1766
• HYUNDAI BOSCH ME17.9.11 TC1766
• KIA BOSCH EDC17C08 TC1766
• KIA BOSCH ME17.9.11 TC1766
• SEAT BOSCH MED17.1.21 TC1793
• SEAT BOSCH MED17.5 TC1766
• SEAT BOSCH MED17.5.21 TC1782
• SEAT BOSCH MED17.5.25 TC1782
• SKODA BOSCH MED17.5 TC1766
• SKODA BOSCH MED17.5.21 TC1782
• SKODA BOSCH MED17.5.25 TC1782
• VOLKSWAGEN BOSCH MED17.1.21 TC1793
• VOLKSWAGEN BOSCH MED17.5 TC1766
• VOLKSWAGEN BOSCH MED17.5.21 TC1782
• VOLKSWAGEN BOSCH MED17.5.25 TC1782

12. Add Mileage Calibration function for below models:
• FIAT MAGNETI MARELLI 8GSF CAN MPC5565+95640
• FIAT MAGNETI MARELLI 8GSW CAN MPC5565+95640
• FIAT MAGNETI MARELLI MJD 8F2 CAN MPC5565+95640
• FIAT MAGNETI MARELLI MJD 8F3 CAN MPC5565+95640
• FIAT MAGNETI MARELLI 8GMF HW02 CAN MPC5553+95640
• FIAT MAGNETI MARELLI 8GMF HW03 CAN MPC5565+95640
• FIAT MAGNETI MARELLI 8GMW CAN MPC5565+95128
• FIAT MAGNETI MARELLI MULTIJET MJD 6JF KLINE MPC555+95320
• OPEL MAGNETI MARELLI MULTIJET MJD 602 1.3 CAN Z13DTH MPC563+M58BW016DB+95320
• OPEL MAGNETI MARELLI MULTIJET MJD 603 1.3 CAN Z13DTH MPC563+M58BW016DB+95320

13. Add Mileage Calibration and Rewrite Count functions for below model:
• FIAT MAGNETI MARELLI MULTIJET MJD 6F3 CAN MPC563+ M58BW016DB+95320(OBD)

14. Add Read PinCode and Reset ECU functions for below models:
• CITROEN BOSCH ME7.4.4 29F400BB+95160
• CITROEN BOSCH ME7.4.5 ST10F275+95320
• PEUGEOT BOSCH ME7.4.4 29F400BB+95160
• PEUGEOT BOSCH ME7.4.5 ST10F275+95320

15. Add Read PinCode function for below models:
• FIAT MAGNETI MARELLI IAW 59F HW<100 CPU32 KLINE 29F200BB+95080
• OPEL MAGNETI MARELLI MULTIJET MJD 602 1.3 CAN Z13DTH SPANSION MPC563+S29CL016J+95320

16. Add Read PinCode and Mileage Calibration functions for below models
• FIAT MAGNETI MARELLI IAW 4AF HW204 KLINE ST10F168+9516C
• FIAT MAGNETI MARELLI IAW 4AF HW407 KUNE ST10F269+9516C
• FIAT MAGNETI MARELLI IAW 59F HW303/HW306 KLINE ST10F16I
+95160
• FIAT MAGNETI MARELLI IAW 59F HW603/HW606 KLINE ST10F26
+95160
• FIAT MAGNETI MARELLI IAW 5AF HW303/HW306 KLINE ST10F16
+95160
• FIAT MAGNETI MARELLI IAW 5AF HW603/HW607 KUNE ST10F2(
+95160
• OPEL MAGNETI MARELLI MULTIJET MJD 602 1.3 KLINE Z13DTJ
MPC563+M58BW016DB+95320
• OPEL MAGNETI MARELLI MULTIJET MJD 602 1.3 KLINE Z13DTJ
SPANSION MPC563+S29CL016J+95320

17. Add Mileage Calibration and Reset ECU functions for below models:

• FIAT MAGNETI MARELLI IAW 5SF8 CAN ST10F296
• FIAT MAGNETI MARELLI IAW 5SF9 CAN ST10F296

18. Optimized software.

Tutorial: steps to program a used ecu for Mercedes Benz 272 engine (ECU ME9.7) without opening the ecu (ecu has a warranty).

1 program the ecu into virgin/brand new state with VVDI MB, Autel or CGDI MB.
2 perform offline variant coding, vin programming using vediamo/DTS monaco
3 perform drive authorization adaptation, fuel pump activate using DAS/vediamo
4 start the engine
5 perform rotor adaptation/boot strap
6 perform throttle adaptation
7 perform fuel quantity adaptation
done!..

 Last version 236 Renault CLIP diagnostic software from 05.2024 was tested working.

The latest versions are needed by professionals, to solve computer re-softwares, service recalls, updates.

Software version: V237

Last version from 05.2024

Full installation kit with Activation

* Setup
* Reg file
* KG
* Clear instructions for DIY

Download LINK

Multilanguage

Compatible device: Alliance or RNM probe

May work with J2534 passthru interfaces like:

OPENPORT 2.0 (but require registry mod)

GODIAG GD101 J2534 (require mod drivers, check how to set up Godiag J2534 with CLIP)

VNCI RNM for Renault Nissan Mitsubishi (original driver)

Obdii365.com engineer tested working with VNCI RNM using original Renault driver.

Operating system:

Renault CAN Clip Alliance works on Windows 7/10 x32

Renault CAN Clip RLT 2002 works on Windows 7 x32

J2534 – Windows 10 x64

In order to install it, you must disable the antivirus during installation. Once finished you can reactivate them normally.

Installation steps are similar as the previous version.

Question: 

I saw there is an Advanced function under Airbag reset of OBDSTAR X300 DP Plus? What does it do?

Does it require license or adapters?

Ford Mazda VNCI VCM3 diagnostic scanner does not come with the software.

Here you can download software and driver for free.

or download full package from vnciobd.com (Download area)

Software including

Ford IDS V130

IDS Loader

IDS patch

VNCI device driver

Ford VCI Driver

Operating system: Windows 10

Multi-language

How to Install Ford IDS V130 for VNCI VCM 3?

Download the VCM3 installation package, unzip it and put it on the desktop

1.Install jave.exe runtime environment

2. Install Ford VCI_software 1.0.1.18 driver

3. Install IDS-130.01_full.exe setup
Reboot after installing setup

4. Install VNCI device manager

If you have IDS license, install your license after finish 4 steps above.

If you do not have IDS license, you need to finish next two steps.

5. Install IDSFordLoaderDriverSetup.exe

6. Copy IDSLoader patch to
C:/Program Files(x86)/Rockway/IDSloader Ford/ directory

Create IDSloader patch shortcut to the desktop
Delete original IDS Loader for Ford shortcut on desktop

Connect VNCI VCM3 scanner with laptop

Run IDS from patch (06.IDSloader_patch.exe)

If VCI device manager show VCI update, ignore the update prompt.

VNCI Ford/Mazda is also compatible with original Ford FDRS and Mazda Mdars software for OEM online programming.