/image%2F1896381%2F20151209%2Fob_cb2b49_obd365-com.png)
CG100X Change 2023 Toyota Granvia S6J3001LSJ Mileage
2023 Toyota Granvia S6J3001LSJ instrument cluster mileage correction is done with CG100X programmer.
CG100X software will show wiring diagram.
Connect the cluster with CG100X MCU adapter according to the wiring diagram.
The device comes with a built-in algorithm that can read and directly adjust the mileage.
Xtool Read PIN and Add Chery Tiggo 4 Pro 2023 Smart Key
Today we’re working on a 2023 Chery Tiggo 4 Pro. The task is to add a spare smart key.
There are no risks associated with adding keys to these vehicles. The only caveat is finding the location of the emergency antenna for the key (this varies greatly depending on the vehicle’s configuration and may be in one location on one vehicle and a different location on another, with a total of four locations).
Tool used: Xtool X100 PAD3 and KC501.
This is done via the OBD2 port and takes about 10 minutes.
1. Open the car.
2. Read the PIN code.
3. Program the key.
Below are photos of the process.
CG FC200 V1.3.1.1 Adds SDI7 Simos 18 Simos 12 Cloning
CG FC200 ECU Programming device update to V1.3.3.1 on Jan 5th, 2026.
FC200 V1.3.3.1
1. Added cloning functions
Porsche: SDI7, SDI6.1
Audi/SEAT/Porsche/Skoda/Volkswagen:
SIMOS18.10, SIMOS18.1, SIMOS12.1, SIMOS12.2
Audi/Porsche/Volkswagen: SIMOS8.5
2. Added immobilizer data parsing functions
Porsche: SDI7, SDI6.1
Audi/SEAT/Porsche/Skoda/Volkswagen:
SIMOS18.10, SIMOS18.1, SIMOS12.1, SIMOS12.2
Audi/Porsche/Volkswagen:
SIMOS8.5,MED9.1(MPC563, MPC564)
3. Added ECU types for bench read/write
Foton/ Hafei Minyi/Jinbei: TR40
Jinbei: TR4C, LEC4A, STC-213
4. Added CALID handling support
How to Check if BMW G BDC2 BDC3 Key is Encrypted or Not?
As titled, how to tell BMW G series BDC2, BDC3 or BCP key by PCB or shell?
How to determine whether a BMW G-series BDC key is encrypted based on the key itself or its appearance?
BDC2 keys are relatively easy to identify: if the key’s circuit board has a long encrypted chip, it is a BDC2 key. All BDC2 key are encrypted.
Many device will add key BDC2 by removing BDC2 module and make key on bench. CGDI K2 now will copy BDC2 key via reading data from the original key. No need to remove BDC2 module anymore. Keydiy and more tools will follow this solution.
How to determine whether a BDC3 key is encrypted?
Open the key shell and check the marking at this location on the casing. If there is ‘Hungary’ letter, it indicates an unencrypted key. If there is no marking or if it is marked “Mexico,” it indicates an encrypted key.
How to determine whether a BCP key is encrypted?
Open the key shell, and you will find a laser marking here. If it displays “CG,” it means the key is a low-spec, unencrypted version. If it displays “CA,” it means the key is a high-spec, encrypted version with UWB functionality.
CGDI K2 now will copy all versions BDC2 BDC3 BCP keys. Keydiy will also release this function.
CG FC200 ME7.8.8 ECU CAN Unlock Success
CG FC200 V1.3.2.5 supports M7 and ME7.8.8 ECU unlock by CAN mode.
Select Bosch ME7.8.8 ST10F275 ECU
Check wiring diagram.
Connect FC200 with ME7.8.8 ECU.
Select CAN Unlock function.
Unlock ECU successfully.
How to Fix Lonsdor K518 Xdntest has Stopped Error?
Problem:
My Lonsdor K518 Pro stopped working and reported an error “Xdntest has Stopped”. How to fix it?
Solution:
Long press these 2 buttons.
That brings you this interface.
Uninstall apk- Oldest APK.
Then restart device again.
How to Modify EEPROM with Yanhua ACDP?
Problem:
Need to fix an eeprom with a known good dump. I have the dump on my phone. Why does Yanhua Mini ACDP2 NOT HAVE A CHIP WRITE function???
Solution:
You have to use the Program part, then Edit. but you have to have a file Loaded first.
SOLVED: Seems like I have to select EDIT before “PROGRAM” appears at the top.
Yanhua ACDP2 Cannot Change DQ500 Gearbox Mileage Solution
Problem:
Attempted a VAG DQ500 (OBH) gearbox mileage correction using a Yanhua Mini ACDP2 and module 30. The process failed—the ACDP app reported a gearbox communication error. Furthermore, the module voltage dropped rapidly despite using an external power supply.
Here is the clue.
ACDP detects that the gearbox hardware number is 0BH927711C.
Hardware version 711C and boot version 401 are locked.
It is not supported by Yanhua ACDP or other tools.
EngineDance X5 Supported Remote Unlock Truck MD1 ECU List
EngineDance X5 is a one-step solution for heavy-duty vehicles. The X5 will also read and flash Bosch MD1 ECUs for trucks.
Remote Unlock Encrypted MD1 ECU
Supported Versions List
[0281020645] DONGFENG-MDICE108-P1892-SPC5898
[0281020654] YUNNEI-MDICE108-P1961-SPC5898
[0281020652] ISUZU-MDICE108-P1963-SPC5898
[0281020695] YUNNEI-MDICC878-P2270-SPC5898
[0281020692] YUCHAI-MDICC878-P2061-SPC5898
[0281037071] IVECO-MDICS089-P2096-TC299
[0281037078] IVECO-MDICS069-P1768-TC299
[0281036675] JAC-MDICS089-P2031-TC299
[0281037003] FOTON-MDICS089-P2028-TC299
[0281037319] FOTON-MDICS089-P2028-TC299
[0281037061] FOTON-MDICS089-P2028-TC299
[0281037061] FOTON-MDICS089-P2046-TC299
[0281039460] ISUZU/QINGLING-MDICS089-P2327-TC299
[0281036275] JMC-MDICS089-P1853-TC299
[0281036399] JMC-MDICS089-P1741-TC299
[0281037336] JMC-MDICS089-P1853-TC299
[0281036372] JMC-MDICS089-P1917-TC299
[0281037245] MAXUS-MDICS089-P1816-TC299
[0281036116] MAXUS-MDICS089-P1816-TC299
[0281036114] MAXUS-MDICS089-P1817-TC299
[0281037248] MAXUS-MDICS089-SK83-TC299
[0281035944] MAXUS-MDICS089-P1826-TC299
[0281020693] SDEC-MDICE100-P1958-TC299
[0281020600] SAICHONGYAN-MDICE101-P1603-TC299
[0281021127] SAICHONGYAN-MDICE101-P1603-TC299
[0281020801] QUANCHAI-MDICC878-P1966 QCHAI HFM-SPC5898
[0281020621] QUANCHAI-MDICC878-P1966 QCHAI PFM-SPC5898
[0281020599] SINOTRUK-MDICE100-P1708-TC299
[0281021190] SINOTRUK-MDICE100-P1158-TC375
[0281020755] SANY-MDICC878-P2089-SPC5898
Support Note: Given the high number of MD1 variants and ongoing manufacturer updates, our current support is limited to select common models.
How to Solve Autel iKey Toyota 4D8A Low-Freq Key Error?
Problem:
This is Lexus RX350H 2023 all keys lost.
Tried to generate an Autel Toyota ikey with Autel IM608.
But the Autel device says it is wrong key and asks to use Toyota 4D8A low-frequency universal key.
Which key is this?
Solution:
Corolla/Camry and some Lexus 2020 to 2024 are 4A chip type, no way you will use that key because it’s 8A unless you use autel universal key.
For Toyota/Lexus 4A smart key, use universal type ikey instead. Low-frequency key here means universal ikey.
Or generate Xhorse XM38 with key tool max. It has been tested working fine on these models.
How to Sync Lonsdor K518 Pro Device if Run App Failed?
Problem:
Tried to program Toyota 8A smart key with Lonsdor K518 Pro but the device is not working. It says run app failed: 00EE. The App permission has expired. How to fix it?
Solution:
Sync K518 device and restart again.
Enable network connection.
Go to Settings– Firmware upgrade– hit Regular sync button.
Then try again.
Yanhua ACDP2 Update BMW BDC3 Display Key Copying Function
Will Yanhua ACDP copy BMW G series smart display key? no classic BDC3 key?
Good news! Yanhua ACDP has upgraded the BMW G series smart display key copying function. It requires module 38 license activation and the BDC3 clip adapter.
.jpg)
Now the BMW display key copying is done through the BMW BDC3 menu.
A separate display key copy menu will be added in coming updates.
Check the display key wiring diagrams below:
Lonsdor JLR Key 2020 Range Rover Sport Keyless Not Working Solution
Problem:
I got a customer has 2020 range rover sport.
New type key
I believe that that car has lost its keys before and some one did a key for it that start only with emergency and remote working normally( Lonsdor key).
The customer wants to do a key that works normally with keyless functions.
So the only method i got is to do RFA replacement and everything willl works normally?
Here some info got it from lonsdor k518 pro.
Solution:
If its PEPS key (passive entry, passive start) , you have to replace mcu in rfa module. Due to UWB function key clone wont work for keyless start.
Turn uwb off.
And add 2 Lonsdor keys.
Option 1 easy method. If you have autel, try generating a key in autel and hopefully everything works. If not….
Option 2. Replace SPC mcu in RFA. Write back proper calibration. Then add keys via obd.
RFA remplacement or MCU of RFA remplacement if you have soldering good skilks.
You need to replace the mcu and write data then program to car.
How to Solve Keydiy App Not Receive Verification Code?
Problem:
When do user verification on Keydiy KD-X4 App, after filling in info and phone number, i didn’t receive the verification code.
How to fix it?
Solution:
If you cannot receive the verification code, input “200909” directly, then submit the request.
Keydiy team will verify and pass your verification.
Program Sprinter W906 2016 All Keys Lost by Launch X431 IMMO Elite
Program Benz Sprinter W906 2016 All Keys Lost successfully using Launch X431 IMMO Elite programmer.
On the car no removal of eis.
No need to take the igintion out of the car.
Password calculation successfully.
Read password with MCU3 fast cable.
For MB, this tool is good.
Photo attached:
