/image%2F1896381%2F20151209%2Fob_cb2b49_obd365-com.png)
OBDSTAR P50 Adds 241 Airbag Part Numbers July 2024
OBDSTAR released new airbag reset software V31 in July 2024.
Fits X300 DP Plus and X300 Classic G3 with airbag license and P50.
V31.00
1. Add 241 part NO. again!!! (12200+part No. supported)
Add 207 part numbers for the below models to support airbag reset: ®
• ACURA 95640 (1 part No.);
• AEOLUS SPC560P40 (2 part No.)；
• AITO R7F701A033 (1 part No.);
• ALFAROMEO 95256 (1 part No.);
• AUDI 95640 (2 part No.);
• BMW 9S12XET512 (1 part No.);
• BUICK (1 part No.);
• CADILLAC (1 part No.)；
• CHANGAN R7F701A033 (2 part No.);
• CHEVROLET 95160.MAC7242, R7F701008 (8 part No.);
• DODGE 95256 (1 part No.)；
• FORD TC22XX-16F, XC2336A (4 part No.);
• GEELY XC2336A-72F (1 part No.)；
• GREATWALL TC222S-16F (2 part No.);
• HAIMA SPC560P40 (5 part No.);
• HANTENG SPC560P40 (5 part No.)；
• HONDA 95640, H8SX1725, MPC5604, R5F2154, SPC560P50,
SPC56AP54, TC23XX-32F (33 part No.)；
• HYUNDAI 95512, TC23XX-32F, XC2361A(7 part No.);
• INFINITI TC22XX-16F (1 part No.);
• JAC SPC560P40 (5 part No.)；
• JEEP 95512 (2 part No.);
• JMC R7F701008 (1 part No.);
• KIA 95256, 95512, R7F701019, R7F7015803, XC2336A (8 part No.);
• LEAPMOTOR R7F701009 (1 part No.);
• LEXUS R7F701A223 (3 part No.)；
• LYNK&CO R7F701330 (1 part No.);
• MAXUS R7F701009 (1 part No.);
• MAZDA TC23XX-16F (1 part No.);
• MG R7F701009 (1 part No.);
• MITSUBISHI TC22XX-16F (1 part No.);
• NISSAN 95128, TC22XX-16F (8 part No.);
• OPEL 95160,9S12DG128 5 part No.);
• PORSCHE 95640 (1 part No.);
• RENAULT 95128, 95160, R7F701042X, TC22XX-16F (7 part No.);
• ROEWE TC224L-16F (3 part No.);
• SEAT11E9(1 part No.);
• SGMW R7F70100X (1 part No.);
• SMART SPC560P50 (1 part No.);
• SOUEAST SPC560P40 (11 part No.);
• SUBARU 93C46, 93C56, 93C57, 93C66, 93C86, H8SX, H8SX1725,
H8SX1726, R7F7010643 (23 part No.);
• SUZUKI H8SX1725, R7F7010183, XC2336B (13 part No.);
• TOYOTA H8SX1725, H8SX1797, R7F7016443, R7F701A223 (10 part No.)；
• TRUMPCHI SPC560P34 (3 part No.);
• VOLVO R7F701330 (2 part No.);
• VOYAH R7F701018 (1 part No.);
• VW R7F7010423, SPC560P50, TC224L-16F (3 part No.);
• ZOTYE SPC560P40 (10 part No.)；
Mercedes 38 PIN Multiplexer OBD1 Pinout
Here is the wiring scheme of the 38-pin to multiplexer cable is as follows (Car end - Multiplexer end).
On the 38-pin end, the wires have round crimp connectors that slide onto the backs of the 38 pins. On the multiplexer end, each wire is soldered to a cylindrical socket for the pins on the multiplexer.
1-A
2-B
3-C
4-D
5-E
6-F
7-G
8-H
9-J
10-K
11-L
12-M
13-N
14-P
15-R
16-S
17-T
18-U
19-V
20-W
21-X
22-Y
23-Z
24-a
25-b
26-c
27-d
28-e
29-f
30-g
31-h
32-i
33-j
34-k
35-m
36-n
37-p
38-q
OBDSTAR G3 Update 2020-2024 Fiat 500 Panda Doblo
OBDSTAR X300 Classic G3 released new Fiat Software on July 27th, 2024.
NEW FIAT SOFTWARE for G3
Details Added:
Add FIAT EUROPE PANDA HYBRID 2020-2024 BLADE (supports Program Keys, Make Dealer Key, Read IMMO Data, Show IMMO Info, and Unlock Keys);
Add FIAT EUROPE 500 HYBRID 2020-2024 BLADE (supports Program Keys, Make Dealer Key, Read IMMO Data, Show IMMO Info, and Unlock Keys);
Add FIAT EUROPE NEW DOBLO 2020-2024 BLADE (supports Program Keys, Make Dealer Key, Read IMMO Data, Show IMMO Info, and Unlock Keys);
Add LANCIA YPSILON 2020-2024 BLADE (supports Program Keys, Make Dealer Key, Read IMMO Data, Show IMMO Info, and Unlock Keys);
Add BSI(PRE-CODING) DELPHI 70F3632/70F3633(ID46) TYPE 3(2020- Hybrid) (supports Program Keys, Make Dealer Key, Read IMMO Data, Show IMMO Info, and Unlock Keys)
Autel IM608 Disable Ford AKL Active Alarm with Gbox
What cable is needed to stop the active alarm on a ford with the Autel im508 or im608?
Autel uses gbox2/gbox3 and you manually do the disconnecting and reconnecting.
How to use Gbox to disable active alarm?
Leave ground connected, then 1 wire from battery + to gbox then 1 wire from battery + terminal to gbox.
the tool controls power then.
The + from battery goes to the GBOX2, and the battery post connector goes to the GBOX2 also.
THE POWER IS GOING TO THE GBOX2 FROM THE BATTERY!! . GUESS WHAT THE GBOX2 IS PLUGGED INTO? THE OBD PORT!!! .
Power from the battery goes to the gbox2, which gives power to the obd port. Gbox OBD connections are really tight.
The tools makes the connection of power and disables the alarm before it activates.
The tool switches the vehicle power on and off, its the whole entire purpose of using the Gbox2.
The gbox2 is acting as a switch to power on the vehicle. The whole entire purpose of using the Gbox2 is so the tool can control power to the vehicle.
Connection example:
2020 Ford F550 all keys lost with active alarm.
Autel really sucks at doing active alarm, I have been successful with it but it’s a headache. Roughly 20 mins of connecting and disconnecting battery.
Autel really needs to just make a real ford bypass cable. Other tools out have bypass cable setup that works great.
Black vs Blue Lonsdor KH100+ Key Tool
Lonsdor released a new Blue version KH100+ remote maker. What is the difference between the Blue and Black KH100+?
The Blue KH100+ comes with 4 free universal remotes. Black version does not.
The Blue version adds Indian vehicle database for TATA Mahindra Maruti. The black one does not.
Apart from that, function is the same.
www.obdii365.com
Possible to Clone Mini Cooper 2002 Remote using Xhorse Key?
Problem:
Can you help me clone this remote? Mini cooper 2002. What kind of xhorse remote to use?
Here is the clue.
You can't clone this remote.
You cannot clone. Generate an Xhorse key and then write the given codes with ista or launch. That is how you would be able to teach the remote.
not possible clone key/not possible clone remote.
You have to generate the new control and program in car. Bar code required for central locking, EWS out for transponder.
Program via OBD to enter bar code and synchronization manual. You cannot program without a code on the remote. Using SmartPro Silca for this car.
When the SmartPro is plugged in the car, it pull the pin.
I had success with this 2003 Mini Cooper S, like this:
After programming with Smartpro, start the engine, open and close the door and press the close or open button for 15 s.
How to Use Topdon Rlink X7 for with VAG ODIS Software?
VW OEM Software with Topdon RLink X7 Connection Instructions.
First of all, follow the instructions to install and activate Rlink X7 J2534.
Then Log in to the RLink Platform software.
Click Drivers > Driver Download. (To avoid driver incompatibility, do not download drivers that are not related to the OEM software.)
Click VW and click Download
Select Rlink mode
Double click the icon to open the ODIS.
Choose RLink driver mode following the order below
After the VIN is detected, click Start Diagnosis
How to Get PSA SID807 Pin Code via MPC Dump
How to find pin code from Siemens SID807 ECU for the Peugeot Citroen group via dump?
First of all, you need a full read. No virtual reading with kess/foxflash etc. Full read with pcmflash/foxflash/kess3/flex etc.
You can find the pin code in the mpc dump (not on the eeprom).
Hex solution to find pin open SID807_IntFl and enjoy.
If it does not show the pin code, your file may damaged.
What Autel Scanners Support “VIN/Odometer Check” Function?
What is the VIN/Odometer Check feature of Autel MaxiSys diagnostic scanners?
“VIN/Odometer Check” feature supports reading the mileage and Vehicle Identification Number (VIN) values stored in various control units of the vehicle.
By comparing the values, it servers as reference infomration for the maintenance history of the vehicle module.
What Autel MaxiSys scanner support this feature?
Supported Devices:
Our VIN/Odometer Check feature is seamlessly integrated into the following Autel devices:
Autel MaxiSys Ultra, Ultra EV, Ultra ADAS, MS919, MS909, MS909EV, MS908SP II, MS908S II, MS908S3, MS906Pro, MS906Pro-TS, MaxiIM IM608Pro II
Who will benefit from the feature?
Car Buyers: Know the history of your potential purchase! Insist on a VIN or VIN/Odometer Check before buying a used car. Our Autel tools can uncover hidden issues like replaced parts or tampered mileage. Protect yourself from scams!
Car Repair Shops: Expand your services and boost customer trust with VIN and VIN/Odometer Checks. Identify potential problems, verify mileage accuracy, and attract more customers to your shop.
these features will provide you with：
1. VIN/Odometer Check: Our latest feature allows you to effortlessly read the mileage and Vehicle Identification Number (VIN) values stored in various control units of the vehicle. Whether you’re a seasoned mechanic or an automotive enthusiast, this tool provides invaluable reference information for the maintenance history of the vehicle module.
2. Enhanced Maintenance Insight: By comparing the values retrieved, you gain deeper insights into the vehicle’s maintenance history, empowering you to make informed decisions and provide superior service to your customers.
OBDSTAR G3 Update Toyota C-HR Proximity 2024
OBDSTAR released new Immobilizer software update on July 15th, 2024.
This update can be applied to OBDSTAR X300 Pro4 and X300 Classic G3.
VW Version: [V45.36]
1. Add manual select system VW PROGRAM REMOTE LT3(CRAFTER).
2. Optimized software
Fiat/Afla [Version: V42.96]
1. Add proximity key programming function for ALFA ROMEO STELVIO 2023-2024.
2. Optimized software
Toyota [Version: V43.04]
Add Read Immo Data and Program Keys functions for below models:
• TMLF12-1
• TOYOTA ASIA C-HR PROXIMITY 2024
• TOYOTAASIA HARRIER PROXIMITY 2020-2022
• TOYOTAASIA LAND CRUISER PROXIMITY 2021-
• TOYOTAASIA RAV4 PROXIMITY 2022-
• TOYOTAASIA SIENNA PROXIMITY 2020-
• TOYOTAASIA VENZA PROXIMITY 2020-
• LEXUS ASIA RZ450H PROXIMITY 2018-
• TOYOTA AUSTRALIA C-HR PROXIMITY 2024
• TOYOTA AUSTRALIA HARRIER PROXIMITY 2020-2022
• TOYOTA AUSTRALIA LAND CRUISER PROXIMITY 2021-
• TOYOTA AUSTRALIA RAV4 PROXIMITY 2022-
• TOYOTA AUSTRALIA SIENNA PROXIMITY 2020-
• TOYOTA AUSTRALIA VENZA PROXIMITY 2020-
• LEXUS AUSTRALIA RZ450H PROXIMITY 2018-
• TOYOTA EUROPE C-HR PROXIMITY 2024
• TOYOTA EUROPE HARRIER PROXIMITY 2020-2022
• TOYOTA EUROPE LAND CRUISER PROXIMITY 2021-
• TOYOTA EUROPE RAV4 PROXIMITY 2022-
• TOYOTA EUROPE SIENNA PROXIMITY 2020-
• TOYOTA EUROPE VENZA PROXIMITY 2020-
• LEXUS EUROPE RZ450H PROXIMITY 2018-
• TOYOTA USA-CANADA C-HR PROXIMITY 2024
• TOYOTA USA-CANADA HARRIER PROXIMITY 2020-2022
• TOYOTA USA-CANADA LAND CRUISER PROXIMITY 2021-
• TOYOTA USA-CANADA RAV4 PROXIMITY 2022-
• TOYOTA USA-CANADA SIENNA PROXIMITY 2020-
• TOYOTA USA-CANADA VENZA PROXIMITY 2020-
• LEXUS USA-CANADA RZ450H PROXIMITY 2018-
How to Bind Xhorse VVDI MLB Tool with Xhorse App?
Online activation is required before using the Xhorse VVDI MLB Tool key programmer.
First time start software it will say the current device is not activated.
Press Yes to activate the device.
Device is activated successfully.
Go to Special Function->Bind device
Scan the QR code via Xhorse App
Device is combined with your Xhorse app.
Then sync vvdi MLB tool.
Now the device is ready to use.
If need to use with vvdi key tool plus, you also need to combine device with key tool plus. Follow instructions here
https://www.obdii365.com/service/combine-vvdi-mlb-tool-with-vvdi-key-tool-plus.html
LAUNCH X431 PAD7 Renault SGW asks for 18-digit PIN?
There is a Renault SGW security Gateway unlock menu in Launch X431 PAD VII, but it asks for an 18-digit PIN to activate it. Where to get the PIN?
Here is the clue.
You will need to input the 18-digit PIN to unlock Renault SGW security gateway with Launch X431 PAD II or PAD V.
The Renault Security Gateway is like a firewall for the ECU’s, you don’t have a full diagnostic functions without unlocking. You only can read out the datastream, the live data from ECUs, you can read out fault codes, but you cannot do special functions or calibrate and ADAS system or other things.
It’s now possible to unlock the security Gateway with Launch X431 diagnostic scanners (forLaunch X431 PAD VII and PAD V and some advanced European tablets ONLY).
In original Launch X431 you have an option to activate the gateway after purchasing a card with tokens.
This feature allows you to unlock Renault vehicles equipped with Gateway (Clio 5, Zoe 2, Kangoo 3, Captur 2, etc.) The feature is for European users only.
We will show you how to proceed.
Go to Mall->Other Goods->Other Software Packages
Find and buy the European SGW Function License within machine directly. Then you will receive an 18-digit pin.
Then you can unlock Renault gateway.
Check instructions here:
https://www.obdii365.com/service/unlock-renault-sgw-gateway-with-launch-x431.html
Program 2015 Renault Trafic 3 All Keys Lost by OBDSTAR
It is a 2015 Renault Trafic 3. I made a Chinese key for a Trafic 3 in all keys lost condition with OBDSTAR X300 DP Plus, everything went without problems.
I was successful in programming a new key. I programmed a blank key from China (4A chip)
I have attached a picture with the warning you get if you take the risk of programming a new key.
My message is that a new key can be made in the all keys lost situation with this programming tool.
It was the first connection to the car, I had no contact with the car before.
Obdstar read the flash for a few minutes and then showed me the PIN so it didn’t have the VIN (or PIN) already known in their server.
Yanhua ACDP Module 17 No Program Found A50F Solution
Here comes the problem:
One of our customers got the module 17 BMW E series 6HP EGS virgin A50F license activated for the Yanhua Mini ACDP, when resetting 6HP EGS ISN, it gave errors no program found and file download failed (image attached). iT was unable to reset EGS.
Solution:
For this needed to clear cache for the file resources and that got that working.
Go to Settings-> Clear cache
User feedback:
It was working after clearing cache.
To virgin 6HP EGS ISN had to bench the CAS and rewrite the ICP back up files i created before starting the process.
And re start the CAS downgrade again that was solved.
Then i got this error “READ ISN ERROR”, for that had to close all acdp app and reconnect to car and cycle ignition a couple of times and then was able to get the ISN.
All was done through OBD2 except the ICP CAS read files and rewrite.
Xhorse MVCI Pro SSM4 No Communication?
Does Xhorse MVCI Pro work with Subaru SSM3 and SSM4 Software?
SSM3: Yes, MVCI pro J2534 cable works with SSM3 without issue using proper driver.
Install SSM3 driver in mvci pro Device management tool.
If SSM3 does not communicate with cable, delete SSM3 driver and manually install Subaru driver again.
Disable anri-virus program before downloading.
SSM4: Not working.
Here is the user report:
Installed MVCI Pro 2.1.4 and SSM4 on different Win10 computers but cannot communicate. The cable is green but not blinking. The MVCI Pro program finds the cable and installed the Subaru driver from it but it does not work. The weird thing is that it detects the cable with firmware version V1.6.2 and the latest version is V1.3.0.
To use Subaru SSM4 software you’d better get VXDIAG VCX SE Subaru device instead.
