/image%2F1896381%2F20151209%2Fob_cb2b49_obd365-com.png)
How to Solve KT200 VW PCR2.1 Unlock by OBD Car Not Start?
Problem:
VW PCR 2.1 polo 6r KT200 write unlock by obd but car don't start. ID good with flash unlocked. Help me?
Solution:
Bad file. file was bad because of checksum....always write ORI file back to test this.use winols to correct checksum.
Feedback:
i solved with Lsuite checksum.
Clone Volvo TRW EMS 2.3 TAD851VE ECU with KT200
KT200 full version successfully read, write and clone to brand new Volvo TRW EMS 2.3 TAD851VE Industrial engine ECU.
this tool definitely works for trw volvo ecm. for ems 2.3 no need to open for cloning.
the connection is provided with the software the kt200 comes with.
How to Solve FoxFlash Error Cannot Find DFB2XX.Dll?
I recevied the Foxflash and try to download Foxflash manager software. But it failed me and shows error cannot find dbf2xx.dll, re-install this application. Any solution.
Solution:
The problem usually occurs on 32bit operating system.
Go to FoxFlash/DFBTech_DRIVER/amd64 folder, copy and paste all files in this folder to C:/Windows/SysWOW64 folder
Better set it up on 64bit system.
KT200 Read MAN TGX EDC17CV42 ECU on Bench
KT200 full read and write EDC17CV42 MAN TGX 18.440 Bench mode OK.
Connect the multifunction cable as follows:
How to Activate FoxFlash Software on 3 PC?
Possible to install and activate FoxFlash manager software on another laptop? Will it be possible to use on 2-3 computers? It would be great for us who are multiple persons in 1 company. As well for us who work outside the workshop.
Yes, you can set up foxflash manager app on up to 3 laptops.
Version 1.3.0 of the FoxFlash Manager is now available. The manager has been improved and now 3 computers to 1 tool.
Download latest FoxFlash manager on https://www.dfb-technology.com/
After download, restart foxflash Manager, install drivers.
Your tool can now be used on a total of 3 computers without need to unbind.
It’s automatic now , needn’t send email for active 3 pcs.
1 tool can bind at 3 pc at the same time now. Use the same email tool links.
.jpg)
Feedback:
Good news for users FOX FLASH. it’s working with 2-3 Pc. Thanks support foxflash.
.jpg)
.jpg)
.jpg)
How to Clone medc17 ecu use FoxFlash clone services
FoxFlash support MEDC17 free clone service. Most of other tools need patch the files after read out, but Foxflash is free.
How to Clone MEDC17 ECUs with FoxFlash?
How to clone medc17 ecu use clone services
1:Read out the old ecu all part like flash and EPROMs
2: Readout the new target ecu flash and EPROMs
3: use the tool box
4: use the clone server
5: select the ecu what you want to clone , read the help
6: Start clone it (normally use flash ), save as new file
7: Write back the new cloned file flash to target new ecu, write the old ecu EPROMs to new ecu too
8: Work done and test it.
OBDSTAR X300 DP Plus Keeps on Boot Logo Screen Solution
Here’s the solution to OBDSTAR X300 DP plus screen freezes boot logo flashing and non-responsive status problem.
.png)
Solution:
Flash the x300dp plus.
Contech obdii365.com to download reflash boot files.
How to flash obdstar x300 dp plus?
Paste reflash files to a SD Card (paste files but not a folder).
Insert SD card to x300 dp plus. Press “+” and shutdown button at the same time until “SUCCESSFUL” message appears.
Then long press the shutdown button to turn device off. Press power on and volume + button at the same time to enter reflashing mode. Wait until flashing completed.
Reboot the device, connect device with internet, login with user name and password. It will back to normal again.
Skoda Octiva 2017 Still in Key Learning Mode Solution
Problem:
I have added keys to skoda octavia 2017 with xhorse vvdi key tool plus and car is still in learning mode. Try to reset instrument cluster, but still no working. Is any way to exit this mode?
Solution:
Use another tool- OBDSTAR X300 DP Plus as long as you can read immo and eeprom data.
She is good at this job.
Feedback:
obdstar done job without any issue.
Just program keys as normal and it finished procedure like should be. for some reason key tool plus could not end the learning stage even if all keys had been recognized.
Will Autel Ethernet Cable Work with Autel IM608
Question: I have Autel im608 and tried to code BMW on diagnostic side. It asked me for an Ethernet adapter but im608 does not have Ethernet port. Where I can order this Autel’s bmw obd and ethernet’s cables?
Yes, you can buy ethernet USB adapter and bmw ethernet coding cable it will work 100%.
IM608 has the same diagnosis function as the ms908s. The IM608 does bmw and Benz software and coding (not programming).
If there is no Enthernet port on the device, buy USB ethernet adapter. Make sure you use voltage support!
If you have Ethernet converter USB adapter and Autel OBDII/lan adapter work fine, Whit im608 you can access to bmw servers (need to have active licence) coding entering car online but only re program cas, dme, egs.
You can use any USB to Ethernet adapters from ebay/Amazon (Must be USB 3.0).
These are recommended:
- USB 3.0 To RJ45 Gigabit Ethernet Network Adapter
- J5Create USB 3.0 to RJ45 Gigabit Ethernet Adapter
- Rankie SuperSpeed USB 3.0 to Rj45 Gigabit Ethernet Network Adapter
How to Clone EDC17CP52 with KT200?
Problem:
KT200 Clone edc17cp52 software stopped 52% what do I do?
Solution:
Autel KM100 Hyundai Santa Fe 2019 iKey Not Start Car?
Problem:
How to Read and Wirte EDC16C34 with KT200/
KT200 Reading an old edc16c34 calculator in bdm with ktag bosch adapter to avoid welding.
eeprom/flash reading
Check cheksum written file with perfect Lsuite
Try and find shorter cables, as with BDM these need to be as short as possible
you can also make small start to place KT200 hardware above you bdm holder
Does Autel IM608 do BMW Benz Online Coding?
Does Autel IM608 have the ability to do online scn coding/programming for Mercedes and online programming for BMW ?
IM608 diagnostic function is the same as MaxiSys MS908S.
Programming No. The Benz and BMW Cloud based programming is not part of the IM608 functions, not thru the Autel clound server.
BMW online coding Yes and no Benz online SCN coding. It does the ecu coding, not much ECU programming, only few SCN and BMW module programming.
Check IM608/IM608 Pro diagnostic function, same as MS908.
| Function | Yes or No |
| Auto VIN | Yes |
| Scan VIN | No |
| Scan license | No |
| Remote Desk | Yes |
| Pre & Post Scan | Yes |
| WiFi printing | No |
| Main functions, Read/Clear DTC, Datastream | Yes |
| Service function | Yes |
| Special functions | Yes |
| Active test | Yes |
| Coding Function | |
| Benz online SCN coding | No |
| BMW online coding | Yes |
| Porsche online coding | Yes |
| VW online coding | Yes |
| Audi online coding | No |
| BMW idrive | Yes |
| VW Audi Skoda flash hidden functions | Yes |
| VW Audi Skoda Seat Guided function | Yes |
| Bentley guided function | Yes |
| Programming | |
| Benz online programming | No |
| BMW online programming | No |
| McLaren diagnosis | Yes |
| Tesla diagnostic | No |
| TPMS function | No |
| Oscilloscope MP408 | Yes |
| Endoscope MV105 MV108 | Yes |
How to Fix Autel IM508 IM608 Error Code 9?
Here comes the solution to Autel IM508/IM608 “Authorization check failed Error Code 9” problem.
.jpg)
Common solution:
Delete specific car software and download again.
Path: data manager> uninstall app> delete, update
Error code 9: Asian cars, Delete sd>scan>vehicle immo>Asia>Talos, then update
Error code 9: Chinese cars, Delete sd>scan>vehicel immo>Domestic>Conqueror, then update
Error code 9; Programmer, data manager> uninstall app> delete, update
KT200 Read FCA GPEC2A in Boot Mode
KT200 read Chrysler Dodge FCA GPEC2A all in boot no problem.
NEW BOOT MODE (BAM) for CONTINENTAL GPEC ECUs/PCMs used on 2015+ FCA Fiat, JEEP, Chrysler, Dodge
CONTINENTAL GPEC2A, GPEC3, GPEC4, GPEC4LM
Complete reading and writing Micro
Complete reading and writing Eeprom
Recovery and checksum available
Review 1:
I read and write gpec2a with kt200 full no problem on newest version 11.01.
Modified flash file into different format, modified flash dtc off with hptuner and reformatted back to dfb format. Checksum ok. no problems
Select Tool boot->Motorola Freescale bam->gpec2a protocol.
works good. Read took maybe 15 mins
this wire is cnf1 for kt200
Review 2).
I have tested in those PCMs (GPEC2A, GPEC3) with KT200 and read well but I did test writing to see if correct checksums.
NOTE:
KT200 only works with some PCMs with SPC5674 processor. It does not work with all, like original Dfox. “Unlock Patch” is required to unlock ECUs with different processors.
If there is no unlock function, genuine products such as Alientech and Dimsport are required.
